Ranger 16-U6078 User manual

INSTALLATION GUIDE
16-U6078 TRANSPORT TUBE STRAP KIT

For technical support, contact us at 1-800-565-5321 16-U6078 Installation Guide |REV. A1 | Page 2
Item No. Description Qty.
70-308 Cradle, TransporT Tube 1
70-309 sTrap, TransporT Tube 1
96-6078 CusTomer InsTall FasTener KIT 1
BILL OF MATERIALS
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Verify all parts are present.
QUICK START GUIDE
q1.1.1 SeTup ( VerIFy all parTs are presenT )...............................................................................................
q1.2.1 assembly..........................................................................................................................................
Phase 1 - Assembly
2
3 To 4
70-308 70-309
Fastener Assembly96-6078
2×
# 98-123
Lock Washer
5/16"
SS304
2×2×
# 98-117
Flat Washer
5/16" OD, 3/4"
SS18-8
2×2×
# 94-250 Channel Nut
5/16"
2×2×
# 90-006
2×2× Socket Set Screw
5/16"-18 × 1"
#90-006 Socket Set Screw 1"
#98-123 Lock Washer 5/16"
#98-117 Flat Washer 5/16"
#94-250 Channel Nut 5/16"
#94-105 Hex Nut 5/16"
# 94-105
Hex Nut
5/16"
SS316 wax
2×2×

For technical support, contact us at 1-800-565-5321 16-U6078 Installation Guide |REV. A1 | Page 3
1.2.1 • Place 2 channel nuts on the top of the crossbar.
• Attach socket set screw to the channel nut, then add the transport tube cradle on top.
1.2.2 Place the transport tube on to the transport tube cradle, then attach one end of the transport tube
strap to the transport tube cradle using the socket set screw.
PHASE 1 – ASSEMBLY
1.2 ASSEMBLY
FASTENERS USED
2×
NOTE: Tube is not included in the kit.
NOTE: Crossbars are not included in the kit.
#90-006 Socket Set Screw 1"
#94-250 Channel Nut 5/16"
FASTENERS USED
1× ( 17 ft •lbs )
#90-006 Socket Set Screw 1"
#98-123 Lock Washer 5/16"
#98-117 Flat Washer 5/16"
#94-250 Channel Nut 5/16"
#94-105 Hex Nut 5/16"
TOOLS
qRatchet
q1/2" Socket
TOOLS
qAllen key 5/32"

For technical support, contact us at 1-800-565-5321 16-U6078 Installation Guide |REV. A1 | Page 4
1.2.3 Bend the transport tube strap around the transport tube, then attach the other end of the transport
tube strap to the transport tube cradle using the socket set screw.
FASTENERS USED
1× ( 17 ft •lbs )
#90-006 Socket Set Screw 1"
#98-123 Lock Washer 5/16"
#98-117 Flat Washer 5/16"
#94-250 Channel Nut 5/16"
#94-105 Hex Nut 5/16"
TOOLS
qRatchet
q1/2" Socket
“Thank you for doing business with us.”
For any feedback or suggestions you might have, please contact: [e-mail]
Image below shows a clamp rack with transport tube.