Rapidline SFT126 User manual

Assembly Instructions:
Tools Required:
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler
*Tools are not included.
Skill Required:
The Assembly Skill Rating is a 5-point system that shows the degree of eort needed in assembling a specic product.
With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.
Time Required:
25 minutes
Easy Hard
Product Code : SFT126 / SFT1575 / SFT1875 / SFT189 / 9SFT1575 / 9SFT189
F126 BL / F1575 BL / F1875 BL / F189 BL / 9F1575 / 9F189
Product Name: Steel Framed Table / Steel Framed Drafting Table
NOTE
• As this is a commercial product, some intermediate skills may be required.
• No pre-drill holes or markings are provided on our table or desk tops.
• Please check you have all hardware before assembling.
• If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item,
required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
• Assemble on a clean, at, smooth surface such as a rug or carpet to avoid parts from being scratched.
• Remove all wrapping materials, including staples and packing straps before you start to assemble
• Keep all hardware parts out of reach of children.
CAUTION
• Heavy product. Do not attempt to lift or move without help
• Do not tighten screws and bolts until completely assembled.
• Do not use this product unless all bolts and screws are rmly secured and tightened.
WARNING
• If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
• Failure to follow these warnings could result in serious injury.
Please note, as this is a commercial product, some intermediate skills are required.
*No pre-drill holes or markings are provided on tops.

**PLEASE NOTE***
top thicknesses of 25mm or greater. Do not use these
screws if your top thickness is less than 25mm
Attach frame to the table top using the provided
screws as shown
SFT126 / SFT1575 / SFT1875 / SFT189 / 9SFT1575 / 9SFT189
F126 BL / F1575 BL / F1875 BL / F189 BL / 9F1575 / 9F189