Raritan T1700-LED User manual

LED KVM Console Quick Setup Guide 1
QSG-T1700LED_T1900LED-1A-v1.1-E 255-37-0001-00 RoHS
Raritan LED KVM Console
Thank you for your purchase of Raritan's LED KVM Console, which is one of the best-known LED-backlit LCD consoles
in the current market. Raritan's LED KVM Console solution is an integrated, 1U device that manages servers or KVM in
data centers, server rooms and other space critical environments - directly from the racks where they are installed.
Raritan provides two LED KVM Console models: T1700-LED and T1900-LED. Both are functionally identical except for
their monitor dimensions and supported video resolutions.
This Quick Setup Guide explains how to install and configure an LED KVM Console. For details on using this product,
access Online Help or User Guide on the
Support page ( http://www.raritan.com/support/ ).
Package Content
The LED KVM Console comes with standard parts shown
below. Check and make sure they are included and in good
condition. If anything is missing or damaged, contact Raritan
or the local vendor immediately.
LED KVM Console
Rackmount brackets
* Mounting depth adjustable from 520 to 908 mm
KVM combo cable (VGA, USB, PS/2)
DVI cable
Quick Setup Guide
Warranty card
Power cord
Drawer key (to unlock the console)
QSRu le
Structure Diagram
1. Touchpad
2. Keyboard
3. Indicators for Num Lock, Caps Lock and Scroll Lock status
4. LCD display
5. OSD buttons and indicator lamp
6. Adjustable mounting brackets
QUICK SETUP GUIDE

LED KVM Console Quick Setup Guide 2
QSG-T1700LED_T1900LED-1A-v1.1-E 255-37-0001-00 RoHS
7. Ergonomic concave handle
8. Lock
QSRu le
Before Installation
It is very important to locate this product in a suitable
environment.
The surface for placing and fixing this product should be
stable and level or mounted into a suitable cabinet.
Make sure the place has good ventilation, is out of direct
sunlight, away from sources of excessive dust, dirt, heat,
water, moisture, and vibration.
Convenience for connecting this product to the related
facilities should be well considered too.
QSRu le
Installation
1. Slightly loosen the fasteners on the brackets, adjust the
length of the brackets to match the mounting depth of the
rack, and then tighten the fasteners.
2. Fasten the brackets to the rack rails securely with your
own screws or cage nuts.
3. Slide the LED KVM Console between the brackets.
4. Fasten the LED KVM Console to the rack.

LED KVM Console Quick Setup Guide 3
QSG-T1700LED_T1900LED-1A-v1.1-E 255-37-0001-00 RoHS
The diagram below illustrates how the LED KVM Console
moves between the brackets.
QSRu le
Connecting a Server or KVM Switch
The LED KVM Console can be connected to either a KVM
(keyboard/video/mouse) switch or a server.
You must always use the Raritan-provided KVM combo cable
to make the connection.
A DVI cable is required if the server's or KVM switch's video
port is a DVI port, or if you prefer using the DVI port.
Connections via VGA and USB or PS/2
You can make a connection to any VGA-based server or KVM
switch via VGA and USB or PS/2.
Do NOT connect both USB and PS/2 connectors
simultaneously.
Do NOT use a USB-A to USB-B cable for the keyboard and
touchpad of the LED KVM Console.
If connecting Raritan's MCCAT28/216 KVM switch, the LED
KVM Console only supports the PS/2 connection.
Warning: Raritan's MasterConsole II (MCC) KVM switch is
NOT supported so do not connect any MCC device to it.
Server - VGA and USB connection
KVM combo cable
VGA-based server
Server - VGA and PS/2 connection
KVM switch - VGA and USB connection
KVM combo cable
VGA-based KVM switch

LED KVM Console Quick Setup Guide 4
QSG-T1700LED_T1900LED-1A-v1.1-E 255-37-0001-00 RoHS
KVM switch - VGA and PS/2 connection
Connections via DVI and USB or PS/2
You can make a connection to a DVI-based server or KVM
switch, such as Raritan's Dominion KX III KVM switch, via a
combination of DVI and USB or PS/2 interface.
Do NOT connect both USB and PS/2 connectors
simultaneously.
Do NOT use a USB-A to USB-B cable for the keyboard and
touchpad of the LED KVM Console.
Server - DVI and USB connection
KVM combo cable
DVI cable
DVI-based server
Server - DVI and PS/2 connection
Tip: If both DVI and VGA ports are available on the server, you
may make connections to both ports, and then press the
DOWN/SOURCE button to switch between different video
sources.
KX III KVM switch - DVI and USB connection
KVM combo cable
DVI cable
KX III or any DVI-based KVM switch
with USB ports
Note: If your DVI-based KVM switch provides only PS/2 ports,
connect PS/2 rather than the USB connector of the KVM
combo cable to the KVM switch.
QSRu le
Locking or Unlocking the LED KVM Console
The LED KVM Console has a lock to the right side. When
locked, you cannot draw this product out of the rack.

LED KVM Console Quick Setup Guide 5
QSG-T1700LED_T1900LED-1A-v1.1-E 255-37-0001-00 RoHS
Use the drawer key or a coin-shaped object to turn the lock.
To unlock this product, turn the lock counterclockwise.
To lock this product, turn the lock clockwise.
QSRu le
Adjusting the Video Settings
The OSD menu controls the video quality. Use the buttons on
the LCD panel to fine tune the LCD display settings.
To auto tune the LCD display:
1. If the integrated LCD panel is not switched on, press
POWER.
2. Press UP/AUTO. An "Auto Adjusting" message appears,
indicating that video settings are being fine tuned.
To manually fine tune the LCD display:
1. Press MENU. The OSD menu appears.
2. Press UP/AUTO and DOWN/SOURCE to select the desired
setting or option.
3. Press MENU to confirm your selection or changes.
4. After making necessary changes, press EXIT to quit the
current setting page or close the OSD menu.
QSRu le
Additional Information
For more information about the LED KVM Console and the
entire Raritan product line, see Raritan's website
(www.raritan.com). For technical issues, contact Raritan
Technical Support. See the Contact Support page in the
Support section on Raritan's website for technical support
contact information worldwide.