RASHA PROFESSIONAL Hex Cruze Bar Owner's manual

1
Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
QUICK USER MANUAL

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507
| 951-654-3585
rashaprofessional .com | [email protected]
2
Edition Notes
Trademarks
Copyright
Notice
Manual Use
Document
Printing
Intended
Audience
Document
Revision
The Hex CruzeBar, User Manual Rev. 1 covers
the description, safety precautions, installation,
programming, operation, and maintenance of the Hex
CruzeBar. Rasha released this edition of the Hex Cruze
Bar User Manual in Febuary 2018.
Rasha®is a registered trademark of RASHA
PROFESSIONAL A/S. (d/b/a RASHA®or Rasha). The
RASHA® logo in its entirety including the RASHA®name
and the Globe wiht Rings, and all other trademarks in this
manual pertaining to services, products, or marketing
statements are owned or licensed by RASHA®. Any other
product names, logos, brands, company names, and other
trademarks featured or referred to within this document
are the property of their respective trademark holders.
RASHA owns the content of this User Manual
in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2018 RASHA. All rights reserved.
Electronically published by Rasha in the United States of
America.
Rasha authorizes its customers to download and print this
manual for professional information purposes only. Rasha
expressly prohibits the usage, copy, storage, distribution,
modication, or printing of this manual or its content for
any other purpose without written consent from Rasha.
For better results, print this document in color, on letter
size paper (8.5 x 11 in), double-sided. If using A4 paper
(210 x 297 mm), congure your printer to scale the content
accordingly.
Any person in charge of installing, operating, and/or
maintaining this product should completely read through
the guide that shipped with the product, as well as this
manual, before installing, operating, or maintaining this
product.
The Hex CruzeBar User Manual Rev. 1 supersedes
all previous versions of this manual. Discard any
older versions of this manual and replace with this
version. Go to www.rashaprofessional.com for the latest
version.
Author Date Editor Date
Ram Magar 2/4/18

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
3
1. Before You Begin................................. 4
What Is Included .................................. 4
Claims .................................................. 4
Manual Conventions ............................ 4
Symbols ............................................... 4
Safety Notes......................................... 5
Personal Safety.................................... 5
Mounting And Rigging .......................... 5
Power And Wiring................................. 5
Operation ............................................. 5
2. Introduction.......................................... 7
Description ........................................... 7
Features ............................................... 7
Overview .............................................. 7
Dimensions .......................................... 7
3. Setup..................................................... 8
AC Power ............................................. 8
AC Plug ................................................ 8
Fuse Replacement ............................... 8
Power Linking....................................... 8
DMX Linking......................................... 8
DMX Personalities................................ 8
Mounting .............................................. 9
Orientation............................................ 9
Rigging ................................................. 9
Procedure............................................ 9
4. Operation............................................ 10
Control Panel Description .................. 10
Menu Map .......................................... 11
Menu Intro .......................................... 11
Operations.......................................... 12
Parameter Value Settings .................. 12
Submenu............................................ 12
Set Dmx Address ............................... 13
Set Fixture Mode................................ 13
Set Display Mode ............................... 14
Set Test Mode .................................... 14
Set Light Run Parameter.................... 15
View Status ........................................ 15
DMX Channels ................................... 16
Specicatons...................................... 18
5. Technical Specications................... 19
Returns............................................... 19
Contact Us ......................................... 20
Table of Contents

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
4
What Is
Included
• Rasha Hex CruzeBar
• Power Cord
• Anteena
• Quick reference guide
Claims
Carefully unpack the product immediately
and check the box to make sure all the parts
are in the package are in good condition.
If the box or the contents (the product and included
accessories) appear damaged from shipping or show signs
of mishandling, notify the carrier immediately, not Rasha.
Failure to report damage to the carrier immediately may
Void your claim. In addition, keep the box and contents
for inspection.
For other issues, such as missing components or parts,
damage not related to shipping, or concealed damage, le
a claim with Rasha within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512 DMX value range in number
50/60 A set of mutually exclusive values in the text
<SET> A button on the product’s control panel
Settings A product function or a menu option
0-512 A sequence of menu options
1-10 A range of menu values from which to choose in a menu
Yes/No A set of two mutually exclusive menu options in a menu
ON A unique value to be entered or selected in a menu
Symbols
Symbols Meaning

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
5
Safety Notes
Read all the following Safety Notes before working with this product. These
notes include important information about the installation, usage, and
maintenance of this product. This product contains no user-serviceable
parts. Any reference to servicing in this User Manual will only apply to
properly trained Rasha certied technicians. Do not open the housing or
attempt any repairs. All applicable local codes and regulations apply to
proper installation of this product.
Personal
Safety
Avoid direct eye exposure to the light source while the product is on. Always
disconnect this product from its power source before servicing. Always
connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be
very hot.
Rigging
This product is for indoor use only! To prevent risk of re or shock, do
not expose this product to rain or moisture. (IP20) CAUTION: When
transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal
electronics of the product. To avoid causing a failure, allow product
to fully acclimate to the surrounding environment before connecting it
to power. Mount this product in a location with adequate ventilation,
at least 20 in (50 cm) from adjacent surfaces. Make sure there are
no ammable materials close to this product while it is operating.
Always carry
this product by the handles. Do not carry from the head. When hanging this
product, always secure to a fastening device using a safety cable.
Power And
Wiring
Always make sure you are connecting this product to the proper voltage
in accordance with the specications in this manual or on the product’s
specication label. Never connect this product to a dimmer pack or rheostat.
Never disconnect this product by pulling or tugging on the power cable.
Operation
Do not operate this product if you see damage to the housing, lenses,
or cables. Have the damaged parts replaced by an authorized
technician at once. To eliminate unnecessary wear and improve
its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it. Do not cover the
ventilation slots when operating to avoid internal overheating. Do not
aim this product toward the Sun. The lenses could concentrate the
solar energy and cause internal overheating. The maximum ambient
temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature. In case of a serious operating problem, stop using this
product immediately!
The term “DMX” used throughout this manual refers to the DMX512 digital data
transmission protocol

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
6
Features • Built in Battery Power and DMX wireless
• Create rich colors and pastels with RGBAW+UV color led chips
• Master/slave wirelessly linkable 2.4 GHz with other xtures for a
coordinated light show
• Create coordinated light shows by linking other xtures in master/slave
mode
• Set up and tear down in a fraction of the time by eliminating the need for
DMX or power cables
• Convenient wireless control using 2.4GHz
• Wireless control of sectional, eye-catching chase effects via DMX
• Extend the battery life span with built-in discharge protection
• Access built-in, eye-catching automated and sound-active programs via
wireless DMX or master/slave mode
• Enhance light shows with adjustable electronic strobe and dimmer
effects
• Compact design easily ts inside sticks of truss or stand free.
• Custom color customization function
Description
Hex CruzeBar up light is designed for the mobile entertainer,
eleminating the hassle of searching for electricity, running generator,
battery backup and or cables. Hex CruzeBar it has built in rechargeable
lithium-ion battery, 2.4 GHZwireless DMX receiver, static RED, GREEN,
BLUE, AMBER, WHITE and UV color, with the ability to custom mix
color. Hex CruzeBar delivers stunning RGBAW+UV colors and nearly
eliminate multicolored shadows. User can set fixtures at any events,
theater, bar, or any entertainment industry with the ability to control by
DMX wireless.
INTRODUCTION

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
7
OVERVIEW

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
8
SETUP
Power Supply
Each Hex CruzeBar has an auto-ranging power supply that works
with an input voltage range of 100 to 240 VAC, 50/60 Hz. To
determine the power requirements for each Hex CruzeBar refer to
the label affixed to the product. You can also refer to the Technical
Specifications chart in this manual. The listed current rating indicates the
maximum current draw during normal operation. For more information,
you may download Sizing Circuit Breakers from the Rasha website:
www.rashaprofessional.com

Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or re. To eliminate
unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The Hex CruzeBar comes with a power input cord terminated
with powerCON® In and out, A connector on one end and an Edison
plug on the other end (U.S. market). If the power input cord that came
with your product has no plug, or if you need to change the Edison
plug, use the table below to wire the new plug.
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a at-head screwdriver, lift the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same
type and rating (T 5 A).
4. press the fuse holder cap back in place and reconnect power.

Make sure to disconnect the product’s power cord before replacing
a blown fuse. Always replace the blown fuse with another of the same
type and rating
DMX
Personalities
z
G
• Refer to the Introduction chapter for a brief description of each DMX
personality.
• The Hex CruzeBar uses a 3-pin DMX and Wireless DMX 2.4 data
connection for the 7 or 12 channel DMX personalities.
•Refer to the Operation chapter to learn how to configure the Hex Cruze
Bar to work in these personalities.
• The DMX Values section provides you with detailed information regarding
the DMX personalities
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
If you are not familiar with or need more information about DMX standards, Master/Slave connectivity,
or the DMX cables/Wireless DMX needed to link this product to a DMX controller, download the DMX
Handbook from the Rasha website: www.rashaprofessional.com

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
9
Before mounting this product, read and follow the Safety Notes. For our
Rasha®Professional line of mounting clamps, go to
http://rashaprofessional.com/en/accesories
Orientation Always mount this product in a safe position and make sure there is
adequate room for ventilation, conguration, and maintenance
Rigging
Rasha recommends using the following general guidelines when
mounting this product.
• When selecting an installation location, consider easy access to
this product for operation, programming adjustments, and routine
maintenance.
• Make sure to mount this product away from any ammable material as
indicated in the Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can
support the product’s weight. See the Technical Specications for the
weight-bearing requirements of this product.
• When hanging this product, always secure to a fastening device using
a safety cable.
MOUNTING

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
10
MENU MAP

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
11
1. Intro
The light panel diagram show as below, The Display support Display & operation just
like any analong menu in todays market, Touching the approprate buttons will set or
modify setting.
2. Operation
1. Operate light with touch or encoder button
• Top Left Sets your Fixtures Address
• Top Center Displays your Fixures Modes of operation
• Top Right Displays Test Mode
• Bottom Left Displays options for Display, (i.e. Screen Rotation)
• Bottom Center displays Advanced option for Fixture.
• Bottom Left diplays current mode, DMX address, Fixture Information.

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
12
2. Parameter value setting
Press MENU to navagate menu
• press <UP> or <DOWN> to scroll to correct setting. Touch <Enter> to enter sub
menu.
• Set and save value. Touch <ENTER> submenu.
3. Sub-Menu
• Select desired sub menu from main menu to enter corresponding sub menu shown
below. There is a of total 14 menu programs, includes class of parameter and
status:
• Addr - Select/ Set DMX address
• CHNd - Select DMX Channels 7/12
• SlNd - Select Enable Slau(Set Slave Mode), Nast(Set Master Mode),Sync(Wire-
less Transmission) or CliC(IR mode on /off)
• SHNd Show and more(Preset color, fade, as , Auto modes)
• COlO- Select color presets
• Fade- Select Fade option 1-3
• Flas-Flas speed set
• Auto- Set Auto mode
• SOUN - Select Preset Sound effect option 1-5
• CUst - Set values for up to 5 custom Color
• DINN - Select or set Dimmer /brightness
• BlNd - Black out
• LED - Turn off LED display
• DIsp - Invert Dispaly
• Test - Test Mode
• Fhrs - Fixture Hours
• Ver - Firmware Version
• Rest - Rest all values to Factory Settings
How to set xture in Master Mode: Press Menu button, select “SLND” Press “Enter” Select “NAST”
Press “Enter”. Now your xture in Master mode, now you can set preset shows from “SHND”
How to Set xture in Slave Mode : Press Menu button, select “SlND” Press Enter, Select “SLAU”
Press Enter. Now your xture in Slave Mode, now you can control from DMX controller/Receive
command from master xtures.

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
13
7 CH Mode
Channel Value Description
CH1 0 No action
1-255 RED dimmer
CH2 0 No action
1-255 GREEN dimmer
CH3 0 No action
1-255 BLUE dimmer
CH4 0 No action
1-255 Amber dimmer -Sharp
CH5 0 No action
1-255 White (0-255 white dimmer)
CH6 0 No Action
1-255 Strobe
3. DMX Channel mode: Hex Cruz bar comes with 7/12 Slectable DMX channel
Modes
CH7
0No Action
1-255 Strobe Speed 0-99
If working in 7 Channel mode make sure that DMX
fader 7 at full 255 and 1-6 are your colors.

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
14
12 CHANNEL MODE
Channel Value Description
CH1 0 No action(blackout)
1-255 RED dimmer--Bright
CH2 0 No action (blackout)
1-255 GREEN dimmer--Bright
CH3 0 No action (blackout)
1-255 BLUE dimmer--Bright
CH4 0 No action (blackout)
1-255 Amber dimmer-Bright
CH5 0 No action (blackout)
1-255 White Dimmer-Bright
CH6 0 No action (blackout)
1-255 UV Dimmer-Bright
CH7
0-7 off
8-15 Color 1
16-23 Color 2
24-30 Color 3
31-38 Color 4
39-46 Color 5
47-54 Color 6
55-61 Color 7
62-69 Color 8
70-77 Color 9
78-85 Color 10
86-92 Color 11
93-100 Color 12
101-108 Color 13
109-116 Color 14
117-123 Color 15
124-131 Color 16
132-139 Color 17
140-147 Color 18

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
15
CH 7
148-154 Color 19
155-162 Color 20
163-170 Color 21
171-178 Color 22
179-185 Color 23
186-193 Color 24
194-201 Color 25
202-209 Color 26
210-216 Color 27
217-224 Color 28
225-232 Color 29
233-240 Color 30
241-247 Color 31
248-255 Color 32
CH 8 0-255 Master Dimmer
CH9
STROBE
0-7 Off
8-131 Open
132-139 Strobe - slow-fast
140-181 Open
182-189 Pulse- fast to slow strobe
190-231 Open
232-239 Pulse -slow to fast strobe
240-247 open
248-255 Random Strobe
CH10 0-255 RGBAWUV slow to fast ramdom color change
CH11 0-255 Auto color change slow to fast without strobe
CH12 Auto color change with strobe along with sound
If working in 12 Channel mode make sure that DMX
fader 8 & 9 at full 255 and 1-6 are your colors.

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
16
SPECIFICATIONS
PHYSICAL
Weight : 5 kg (11 lbs.)
Dimensions 600 x 120 x 125 mm (7.8 x 4.7 x 4.9 in.)
DYNAMIC EFFECTS
Color mixing RGBAWUV
Color selection 34 color presets
Electronic dimming 0-100%
Strobe and pulse effects Variable speed and action, ran-
dom strobe
Electronic shutter effect Instant open and blackout
OPTICS
Light source 9 x 18 W RGBAW+UV LED Chips
LEDs Beam angle 25/40° Minimum
LED lifetime 50,000 hours (to >70% luminous output)*
LED Manufacturer’s gure obtained under manufacturer’s
test conditions
CONTROL AND PROGRAMMING
Control options DMX, stand-alone Sound active, Auto,
Static Mode,
DMX channels 7/12
Remote type Superior IR Technology
Stand-alone trigger options
Music trig, auto trig, Linkable
Standalone built-in shows
Random, preset colors, or variable fade
Settings, addressing and programming
Control panel with LED display
Sound activation Adjustable microphone sensitivity
DMX compliance
USITT DMX512 or DMX 512 Universal
Wireless DMX Transmitter compliance
Universal DMX 512 GHz with
7 group
CONSTRUCTION
Color Black/White
Protection rating IP20
INSTALLATION
Mounting Adjustable folding bracket,
Orientation Any
Location For indoor use only
APPROVALS
EU safety EN 60598-1, EN 60598-2-1, I EC/EN 60825-1
EU EMC EN 55103-1, EN 55103-2, EN 61000-3-2
Canadian safety (US model) CAN/CSA C.22.2 No.
250
CONNECTIONS
AC power in/thru American Power in socket
DMX data in/thru 3 -pin locking XLR
Wireless DMX Receiver 2.4 GHz DMX Signal receiver
ELECTRICAL
AC power 100-240 V, 50/60 Hz
Power consumption 100 W
Fuse T 5 A
Built in Battery 14000 mAh lion lithium
Battery charger 2A
Charging time 4 hours
THERMAL
Maximum ambient temperature (Ta max.) 50°C(122°F)
Minimum ambient temperature (Ta min) 0°C (32°F)
Cooling 2 low noise fan
Heat control Aluminum Heating pan installed
ACCESSORIES (SOLD SEPARATELY)
3M US Power cable P/N 890113
Safety eyebolt P/N 890110
3-pin male XLR connector 5M P/N 890103
8 in 1 Charging road case P/N 901308
ORDERING INFORMATION
C6W9BW, Natural packing P/N 819180
C6W9BW, White Color Packing P/N 819181
C6W9BW, Flight/Road Case P/N 819182

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
17
RETURNS
You must send the product prepaid, in the original
box, and with the original packing and accessories.
Rasha Professional will not issue call tags.
Visit www.rashaprofessional.com to log into your account and
request a Return Merchandise Authorization (RMA) number before
shipping the product. Be prepared to provide the model number,
your order numver, serial number, and a brief description of the
Claim(s) for the return.
Clearly label the package with an RMA number. Rasha will refuse
any product returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it
on a properly afxed label.
Once you have received the RMA number, include the following
information on a piece of paper inside the box:
• Your name
• Your address
• Your phone number
• The RMA number
• A brief description of the problem(s).

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
18
WORLD HEADQUARTERS - RASHA GENERAL INFORMATION
Rasha Professional A/S LLC.
West Coast Headquarter
Address: 1800 Rustin Ave.,
Riverside CA 92507
Voice: [phone]
www.rashaprofessional.com
Technical Support
Email: [e-mail]
Outside the U.S.contact the dealer of record. Follow their instructions
to request support or to return a product. Visit our website for contact
details.
CONTACT US

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
19
NOTES

Rasha Professional A/S 1800 Rustin Ave., Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
20