RASHA PROFESSIONAL Penta Crux Owner's manual

QUICK USER MANUAL
RASHA PROFESSIONAL A/S
1
Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
PENTA

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
2
Edition Notes
The Penta Crux, User Manual Rev. 1 covers the
description, safety precautions, installation, programming,
operation, and maintenance of the Penta Crux. Rasha
released this edition of the Penta Crux User Manual in
July 2016.
Trademarks
Rasha®is a registered trademark of RASHA
PROFESSIONAL A/S. (d/b/a RASHA®or Rasha). The
RASHA® logo in its entirety including the RASHA®name
and the Globe wiht Rings, and all other trademarks in this
manual pertaining to services, products, or marketing
statements are owned or licensed by RASHA®. Any other
product names, logos, brands, company names, and other
trademarks featured or referred to within this document
are the property of their respective trademark holders.
Copyright
Notice
RASHA owns the content of this User Manual in its
entirety, including but not limited to pictures, logos,
trademarks, and resources. © Copyright 2015 RASHA. All
rights reserved. Electronically published by Rasha in the
United States of America.
Manual Use
Rasha authorizes its customers to download and print this
manual for professional information purposes only. Rasha
expressly prohibits the usage, copy, storage, distribution,
modication, or printing of this manual or its content for
any other purpose without written consent from Rasha.
Document
Printing
For better results, print this document in color, on letter
size paper (8.5 x 11 in), double-sided. If using A4 paper
(210 x 297 mm), congure your printer to scale the content
accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or
maintaining this product should completely read through
the guide that shipped with the product, as well as this
manual, before installing, operating, or maintaining this
product.
Document
Revision
The Penta Crux User Manual Rev. 1 supersedes all
previous versions of this manual. Discard any older
versions of this manual and replace with this version. Go
to www.rashaprofessional.com for the latest version.
Author Date Editor Date
RAM MAGAR 03/28/2017

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
3
1. Before You Begin................................. 4
What Is Included .................................. 4
Claims .................................................. 4
Manual Conventions ............................ 4
Symbols ............................................... 4
Safety Notes......................................... 5
Personal Safety.................................... 5
Mounting And Rigging .......................... 5
Power And Wiring................................. 5
Operation ............................................. 5
2. Introduction.......................................... 7
Description ........................................... 7
Features ............................................... 7
Overview .............................................. 7
Dimensions .......................................... 7
3. Setup..................................................... 8
AC Power ............................................. 8
AC Plug ................................................ 8
Fuse Replacement ............................... 8
Power Linking....................................... 8
DMX Linking......................................... 8
DMX Personalities................................ 8
Mounting .............................................. 9
Orientation............................................ 9
Rigging ................................................. 9
Procedure............................................ 9
4. Operation............................................ 10
Control Panel Description .................. 10
Menu Map .......................................... 11
Menu Intro .......................................... 11
Operations.......................................... 12
Parameter Value Settings .................. 12
Submenu............................................ 12
5. DMX Channels ................................... 13
Channel 6........................................... 13
Channel 11 ......................................... 14
6. Technical Specications................... 16
Returns ............................................. 17
Contact Us ........................................ 18
Table of Contents

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
4
What Is
Included
• Rasha Penta Crux
• Power Cord
• DMX Cable 3-Pins
• Quick reference guide
Claims
Carefully unpack the product immediately and check the
box to make sure all the parts are in the package are in
good condition. If the box or the contents (the product and
included accessories) appear damaged from shipping or
show signs of mishandling, notify the carrier immediately,
not Rasha. Failure to report damage to the carrier
immediately may Void your claim. In addition, keep the
box and contents for inspection.
For other issues, such as missing components or parts,
damage not related to shipping, or concealed damage, le
a claim with Rasha within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512 DMX value range in number
50/60 A set of mutually exclusive values in the text
<SET> A button on the product’s control panel
Settings A product function or a menu option
0-512 A sequence of menu options
1-10 A range of menu values from which to choose in a menu
Yes/No A set of two mutually exclusive menu options in a menu
ON A unique value to be entered or selected in a menu
Symbols
Symbols Meaning
The term “DMX” used throughout this manual refers to the DMX512 digital
data transmission protocol

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
5
Safety Notes
Read all the following Safety Notes before working with this product. These
notes include important information about the installation, usage, and
maintenance of this product. This product contains no user-serviceable
parts. Any reference to servicing in this User Manual will only apply to
properly trained Rasha certied technicians. Do not open the housing or
attempt any repairs. All applicable local codes and regulations apply to
proper installation of this product.
Personal
Safety
Avoid direct eye exposure to the light source while the product is on. Always
disconnect this product from its power source before servicing. Always
connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be
very hot.
Rigging
This product is for indoor use only! To prevent risk of re or shock, do
not expose this product to rain or moisture. (IP20) CAUTION: When
transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal
electronics of the product. To avoid causing a failure, allow product
to fully acclimate to the surrounding environment before connecting it
to power. Mount this product in a location with adequate ventilation,
at least 20 in (50 cm) from adjacent surfaces. Make sure there are
n o  a m m a b l e m a t e r i a l s c l o s e t o t h i s p r o d u c t w h i l e i t i s o p e r a t i n g .
Always carry this product by the handles. Do not carry from the head.
When hanging this product, always secure to a fastening device using a
safety cable.
Power And
Wiring
Always make sure you are connecting this product to the proper voltage
in accordance with the specications in this manual or on the product’s
specication label. Never connect this product to a dimmer pack or
rheostat. Never disconnect this product by pulling or tugging on the power
cable.
Operation
Do not operate this product if you see damage to the housing, lenses,
or cables. Have the damaged parts replaced by an authorized technician
at once. To eliminate unnecessary wear and improve its lifespan, during
periods of non-use completely disconnect the product from power via
breaker or by unplugging it. Do not cover the ventilation slots when
operating to avoid internal overheating. Do not aim this product toward
the Sun. The lenses could concentrate the solar energy and cause internal
overheating. The maximum ambient temperature is 113 °F (45 °C). Do
not operate this product at a higher temperature. In case of a serious
operating problem, stop using this product immediately!
Use on Dimmer Auto Programs
Outdoor Use Auto-Ranging Power Supply
Sound-Activated Replaceable Fuse
DMX User-Serviceable
Master/Slave
The term “DMX” used throughout this manual refers to the DMX512 digital data
transmission protocol

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
6
Features • Built in Battery Power and DMX wireless
• Create rich colors and pastels with RGBAW color led chips
• Master/slave wirelessly linkable 2.4 GHz with other xtures for a
coordinated light show
• Create coordinated light shows by linking other xtures in master/slave
mode
• Set up and tear down in a fraction of the time by eliminating the need for
DMX or power cables
• Convenient wireless control using 2.4GHz
• Wireless control of sectional, eye-catching chase effects via DMX
• Extend the battery life span with built-in discharge protection
• Access built-in, eye-catching automated and sound-active programs via
wireless DMX or master/slave mode
• Enhance light shows with adjustable electronic strobe and dimmer
effects
• Compact design easily ts inside sticks of truss or stand free.
• Custom color customization function
Description
Penta Crux up light is designed for the mobile entertainer, elemintating the
hassle of serching for electricity, running generator, battery backup and or
cables. Penta Crux it has built in rechargeable lithium-ion battery, 2.4 GHz
wireless DMX receiver, static RED, GREEN, BLUE, AMBER and WHITE
color, with the ablity to custom mix color. Penta Crux delivers stunning
RGBAW colors and nearly eliminate multicolored shadows. User can set
xtures at any events, theater, bar, or any entertainment industry wiht the
ablitly to control up to 20 Fixtures* by DMX wirelessly.
INTRODUCTION

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
7
OVERVIEW

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
8
SETUP
Power Supply
Each Penta Crux has an auto-ranging power supply that works with an
input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power
requirements for each Penta Crux refer to the label afxed to the product.
You can also refer to the Technical Specications chart in this manual.
The listed current rating indicates the maximum current draw during
normal operation. For more information, you may download Sizing Circuit
Breakers from the Rasha website: www.rashaprofessional.com

Always connect this product to a protected circuit with an appropriate
electrical ground to avoid the risk of electrocution or re. To eliminate
unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer
circuit, even if the rheostat or dimmer channel serves only as a 0 to 100%
switch.
AC Plug
The Penta Crux comes with a power input cord terminated with a IEC
power connector on one end and an Edison plug on the other end (U.S.
market). If the power input cord that came with your product has no plug,
or if you need to change the Edison plug, use the table below to wire the
new plug.
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a at-head screwdriver, lift the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same
type and rating (T 5 A).
4.
press the fuse holder cap back in place and reconnect power.

Power Linking
Make sure to disconnect the product’s power cord before replacing a
blown fuse. Always replace the blown fuse with another of the same type
and rating
You can link 10 Fixtures @ 110V and 20 fixtures @ 220V. This is for
charging purpose only.
DMX
Personalities
•The Penta Crux uses a 3- or 5-pin DMX data connection for the 6 or 11
channel DMX personalities.
•Refer to the Introduction chapter for a brief description of each DMX
personality.
•Refer to the Operation chapter to learn how to congure the Penta Crux
to work in these personalities.
•The DMX Values section provides you with detailed information regarding
the DMX personalities
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
If you are not familiar with or need more information about DMX standards, Master/Slave connectivity,
or the DMX cables needed to link this product to a DMX controller, download the DMX Handbook from
the Rasha website: www.rashaprofessional.com

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
9
Before mounting this product, read and follow the Safety Notes. For our
Rasha®Professional line of mounting clamps, go to
http://rashaprofessional.com/en/accesories
Orientation Always mount this product in a safe position and make sure there is
adequate room for ventilation, conguration, and maintenance
Rigging
Rasha recommends using the following general guidelines when mounting
this product.
• When selecting an installation location, consider easy access to
this product for operation, programming adjustments, and routine
maintenance.
• Make sure to mount this product away from any ammable material as
indicated in the Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can
support the product’s weight. See the Technical Specications for the
weight-bearing requirements of this product.
• When hanging this product, always secure to a fastening device using
a safety cable.
Procedures
The Penta Crux comes with a preinstalled mounting surface to which you
will be able to attach our clamps found at www.rashaprofessional. com/en/
accesories. Make sure the clamps are capable of supporting the
weight of this product. Use at least 1 mounting point per product. In
addition, use a safety cable to link the product to the structure.
MOUNTING

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
10
MENU MAP
Addr 1-512
Chnd 6
11
sLND Slav
Nast
Sync
CliC
SHND Colo 1-38
fade1-3
Flas 1-100
Auto 1-9
soun 1-6
Cust CC1-CC5
DINN 1-3
Blnd on
off
led on
off
dIsp
test
Fhrs
Ver
Rest

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
11
1. Intro
The light panel diagram show as below, The Display support Display & operation just
like any analong menu in todays market, Touching the approprate buttons will set or
modify setting.
2. Operation
1. Operate light with touch or encoder button
• Top Left Sets your Fixtures Address
• Top Center Displays your Fixures Modes of operation
• Top Right Displays Test Mode
• Bottom Left Displays options for Display, (i.e. Screen Rotation)
• Bottom Center displays Advanced option for Fixture.
• Bottom Left diplays current mode, DMX address, Fixture Information.
MENU UP DOWN ENTER
8. 8. 8. 8
ADDR
MENU UP DOWN ENTER
8. 8. 8. 8
CHND
MENU UP DOWN ENTER
8. 8. 8. 8
SOUN
MENU UP DOWN ENTER
8. 8. 8. 8
SHND
MENU UP DOWN ENTER
8. 8. 8. 8
DINN
MENU UP DOWN ENTER
8. 8. 8. 8
BLND
MENU UP DOWN ENTER
8. 8. 8. 8
SLND
MENU UP DOWN ENTER
8. 8. 8. 8
CUST
MENU UP DOWN ENTER
8. 8. 8. 8
Led
MENU UP DOWN ENTER
8. 8. 8. 8
DISP
MENU UP DOWN ENTER
8. 8. 8. 8
Test
MENU UP DOWN ENTER
8. 8. 8. 8
FHRS
MENU UP DOWN ENTER
8. 8. 8. 8
uer
MENU UP DOWN ENTER
8. 8. 8. 8
rest

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
12
2. Parameter value setting
Press MENU to navagate menu
• press <UP> or <DOWN> to scroll to correct setting. Touch <Enter> to enter sub
menu.
• Set and save value. Touch <ENTER> submenu.
3. Sub-Menu
• Select desired sub menu from main menu to enter corresponding sub menu shown
below. There is a of total 14 menu programs, includes class of parameter and
status:
• Addr - Select DMX address
• Chnd - Select DMX Channels 6/11
• Slnd - Select Enable Slave, Master,Sync or IR mode
• Shnd
• Select color presets
• Fade speed
• Flash speed
• Auto speed
• Soun - Select sensitivity
• Cust - Set values for up to 5 custom Color
• Dinn - Dimmer
• Blnd - Black out
• LED - Turn off LED display
• Disp - Invert Dispaly
• Test - Test Mode
• Fhrs - Fixture Hours
• Ver - Firmware Version
• Rest - Rest all values to Factory Settings
Addr 1-512
Chnd 6
11
sLND Slav
Nast
Sync
CliC
SHND Colo 1-38
fade1-3
Flas 1-100
Auto 1-9
soun 1-6
Cust CC1-CC5
DINN 1-3
Blnd on
off
led on
off
dIsp
test
Fhrs
Ver
Rest

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
13
6 CH Mode
Channel Value Description
CH1 0 No action
1-255 Red (Intensity 0 to 100%)
CH2 0 No action
1-255 Green (Intensity 0 to 100%)
CH3 0 No action
1-255 Blue (Intensity 0 to 100%)
CH4 0 No action
1-255 Amber(Intensity 0 to 100%)
CH5 0 No action
1-255 White (Intensity 0 to 100%) 5 0
CH6 0 No Action
1-255 Strobe speed 0-99
If working in 6 Channel mode make sure that DMX faders 6 are to at full
255 and 1-5 are your colors.
DMX VALUES

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
14
11 CH Mode
Channel Value Description
CH1 0 No action(blackout)
1 - 255 Red 0-100%
CH2 0 No action (blackout)
1 - 255 Green 0-100%
CH3 0 No action (blackout)
1 - 255 Blue 0-100%
CH4 0 No action (blackout)
1 - 255 Amber 0-100%
CH5 0 No action (blackout)
1 - 255 White 0-100%
CH6
0 - 7 Off
8 - 15 Color 1
16 - 23 Color 2
24 - 30 Color 3
31 - 38 Color 4
39 - 46 Color 5
47 - 54 Color 6
55 - 61 Color 7
62 - 69 Color 8
70 - 77 Color 9
78 - 85 Color 10
86 - 92 Color 11
93 - 100 Color 12
101 - 108 Color 13
109 - 116 Color 14
117 - 123 Color 15
124 - 131 Color 16
132 - 139 Color 17
140 - 147 Color 18
DMX VALUES

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
15
If working in 11 Channel mode make sure that DMX faders 7 & 8 are to at
full 255 and 1-5 are your colors.
148 - 154 Color 19
155 - 162 Color 20
163 - 170 Color 21
171 - 178 Color 22
179 - 185 Color 23
186 - 193 Color 24
194 - 201 Color 25
202 - 209 Color 26
210 - 216 Color 27
217 - 224 Color 28
225 - 232 Color 29
233 - 240 Color 30
241 - 247 Color 31
248 - 255 Color 32
70 - 255 Master Dimmer Intencity 0-100%
8Strobe
0 - 7 Off
16-131 Open
132-139 Strobe - slow-fast
140-181 Open
182-189 Pulse - fast close & slow open
190-231 Open
232-239 Pulse - slow close & fast open
240-247 Open
248-255 Random strobe
248 - 255 Open
90 - 255 RGBAW slow to fast ramdom color change
10 0 - 255 Auto color change slow to fast without
strobe
11 0 - 255 Auto color change with strobe along with
sound

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
16
SPECIFICATIONS
PHYSICAL
Weight : 7.7 lbs.
Dimensions 200 x 90 x 200 mm (7.8 x 2.3 x 7.8 in.)
DYNAMIC EFFECTS
Color mixing RGBAW
Color selection 38 color presets
Electronic dimming 0-100%
Strobe and pulse effects Variable speed and action,
random strobe
Electronic dimmer effect Instant open and blackout
OPTICS
Light source 9 x 15 W RGBAW LED Chips
LEDs Beam angle 25/40° Minimum
LED lifetime 50,000 hours (to >70% luminous output)*
LED Manufacturer’s gure obtained under manufacturer’s
test conditions
CONTROL AND PROGRAMMING
Control options DMX, stand-alone Sound active, Auto,
Static Mode,
DMX channels 6/11
Remote type Superior IR Technology
Stand-alone trigger options
Music trig, auto trig, Linkable
Standalone built-in shows
Random, preset colors, or variable fade
Settings, addressing and programming
Control panel with LED display
Sound activation Adjustable microphone sensitivity
DMX compliance
USITT DMX512/1990 or DMX 512 Universal
Wireless DMX Transmitter compliance
Universal DMX 512 GHz
CONSTRUCTION
Color Black/White
Protection rating IP20
INSTALLATION
Mounting Adjustable folding bracket,
Orientation Any
Location For indoor use only
APPROVALS
EU safety EN 60598-1, EN 60598-2-1, I EC/EN 60825-1
EU EMC EN 55103-1, EN 55103-2, EN 61000-3-2
Canadian safety (US model) CAN/CSA C.22.2 No.
250
CONNECTIONS
AC power in/thru IEC to Edison
DMX data in/thru 3 or 5-pin locking XLR
Wireless DMX Receiver 2.4 GHz DMX Signal receiver
ELECTRICAL
AC power 100-240 V, 50/60 Hz
Power consumption 100 W
Fuse T 5 A
Built in Battery 14000 mAh lion lithium
Battery charger 2A
Charging time 3 hours
THERMAL
Maximum ambient temperature (Ta max.) 50°C(122°F)
Minimum ambient temperature (Ta min) 0°C (32°F)
Cooling 2 low noise fan
Heat control Aluminum Heating pan installed
ACCESSORIES (SOLD SEPARATELY)
3M US Power cable P/N 890113
Safety Wire P/N 890110
3-pin male XLR connector 5M P/N 890103
6 in 1 Charging road case P/N 901306
ORDERING INFORMATION
Crux-Penta in Cardboard Box P/N 819110
Crux-Penta Charging Road Case P/N 819192

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
17
RETURNS
You must send the product prepaid, in the original box, and with the
original packing and accessories. Rasha Professional will not issue
call tags.
Visit www.rashaprofessional.com to log into your account and
request a Return Merchandise Authorization (RMA) number before
shipping the product. Be prepared to provide the model number,
your order numver, serial number, and a brief description of the
Claim(s) for the return.
Clearly label the package with an RMA number. Rasha will refuse
any product returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it
on a properly afxed label.
Once you have received the RMA number, include the following
information on a piece of paper inside the box:
• Your name
• Your address
• Your phone number
• The RMA number
• A brief description of the problem(s).
Be sure to pack the product properly.Any shipping damage resulting
from inadequate packaging will be the customer’s responsibility.
Double-boxing is recommended. Rasha reserves the right to use its
own discretion to repair or replace returned product(s).

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
18
HEADQUARTER - RASHA PROFESSIONAL A/S LLC
ADDRESS: 1800 Rustin Ave, Riverside CA 92507
Voice: [phone]
Technical Support
Email: [email protected]
www.rashaprofessional.com | www.rashalight.com
Outside the U.S.contact the dealer of record. Follow their instructions
to request support or to return a product. Visit our website for contact
details.
CONTACT US

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
19
NOTES

Rasha Professional A/S 1800 Rustin Ave, Riverside CA, 92507 | 951-654-3585
rashaprofessional .com | [email protected]
20