Razer RC30-013601 User manual

1
PACKAGE CONTENTS / SYSTEM REQUIREMENTS
PACKAGE CONTENTS
•Razer Gaming Mouse (Model: RC30-013601)
•Charging Dock(Model: RC30-013602)
•Charging Cable
•Screwdriver
•Important ProductInformation Guide
SYSTEM REQUIREMENTS
•PC or Mac with a free USB 2.0 port
•Windows® 8 / Windows® 7 / Windows Vista® / Windows® XP (32-bit) /
Mac OS X (10.8-10.10)
•Internet connection
•100MB of free hard disk space

2
DEVICE LAYOUT
[Placeholder image]
A. Left mouse button
B. Right mouse button
C. Scroll wheel
D. Left tilt-click - scroll left
E. Right tilt-click - scroll right
F. Sensitivity button - stage up*
G. Sensitivity button - stage down*
H. Mouse button 5
I. Mouse button 4
J. Side Strips
K. Ultraslick mouse feet
L. Adjustable click force mechanism
M. Wireless on/off switch
N. 16000 DPI4G sensor
[Placeholder image]
O. Charging cable
P. Charging dock
Q. Screwdriver
Note: Once you have installed Razer Synapse, you will have access to more DPI options which
you can configure to the Sensitivity buttons.
H
I
K
K
L
L
K
N
O
P
Q
M
D
E
F
G
J

3
SETTING UP YOUR RAZER MAMBA
ADJUSTING THE CLICK FORCE
1. Take the screwdriver provided and insert it firmly into the adjustable
click force mechanism.
[Placeholder image]
2. Rotate the screwdriver clockwise to increase or counterclockwise to
decrease the resistance.
[Placeholder image]
LIGHTING SCHEME WHEN CHARGING THE RAZER MAMBA
LED INDICATOR BATTERY STATUS
(scroll wheel blinking: red)
[Placeholder image] Low power (<25%)
(1
st
[Placeholder image]
LED breathing) Charging (0%-15%)
(2
nd
[Placeholder image]
LED breathing) Charging (>5%-30%)
(3
rd
[Placeholder image]
LED breathing) Charging (>30%-45%)
(4
th
[Placeholder image]
LED breathing) Charging (>45%-60%)
(5
th
[Placeholder image]
LED breathing) Charging (>60%-75%)
(6
th
[Placeholder image]
LED breathing) Charging (>75%-90%)
(7
th
[Placeholder image]
LED breathing) Charging (>90%-99%)
(All LEDsspectrum cycling)
[Placeholder image] Fully charged (100%)
Note: Thislighting scheme is only applicable if the Razer Mamba is placed on the charging
dock. The Razer Mamba will resume its own lighting effects once it is removed from the
charging dock.

4
CHARGING YOUR RAZER MAMBA
For best results, please fully charge your Razer Mamba before using it forthe
first time. A depleted battery will be fully charged in about 5hours. If the Razer
Mamba has not been used for an extended period, you mayneed to recharge it
before use.
The Razer Mamba requires a USB connection that is able to supply sufficient
power to charge the battery. The battery charging process of the Razer Mamba
may be affected if connected to a non-powered USB hub or non-powered USB
ports found on certain keyboards and other peripherals. When in doubt, it is
preferable to connect the Razer Mamba directly to the USB port of your
computer.
WIRELESS MODE
1. Insert the micro USB connector to the charging dock and then insert the
USB connector to your computer.
[Placeholder image]
2. Slide the switch to the Wireless ON position as shown here. To conserve
battery power, always move the switch to the Wireless OFF position
when not using your mouse in wireless mode.
[Placeholder image]

5
3. To charge the Razer Mamba in wireless mode, ensure that the switch is
set to Wireless OFF position and then place the mouse on the charging
dock.
[Placeholder image]
WIRED MODE
Insert the micro USB connector to the Razer Mamba and then insert the USB
connector to your computer.
[Placeholder image]
The Razer Mamba is now ready for use as a high performance wired mouse. In
addition, its battery will automatically start charging in wired mode.

6
INSTALLING YOUR RAZER MAMBA
Step 1: Connect your Razer device to the USB port of your computer.
Step 2: Install Razer Synapse when prompted* or download the installer
from www.razerzone.com/synapse.
Step 3: Register for a Razer ID or log in to Synapse with an existing account.
*Applicable for Windows 8 or later.
Note:By default, the Razer Mamba is set to spectrum cycling. To customize the lighting,
please install Razer Synapse.
Please refer to the Online Master Guide at www.razersupport.com for in-depth
instructions on how to configure and use your Razer Mamba.

7
CONFIGURINGTHE SYNAPSE CHROMA LIGHTING EFFECTS
Each Chromaenabled device has a Lighting Tab on Synapse. This Lighting Tab
allows you to customize the look of your Razer Mamba by being able to choose
from 16.8 million colors for the charging dock, scroll wheel, and side strips.
This tab also allows you to adjust the intensity of the lighting using the
BRIGHTNESS dropdown menu.If you have other Chromaenabled devices, you
can synchronize all lighting scheme by clicking the button. Note that
this synchronization function will only apply on devices that support the
selected scheme.
BASIC LIGHTING EFFECTS
Name Description How to set up
Spectrum
cycling
The LEDs
will cycle
between 16.8 million
colors indefinitely
Default effect. No further
customization is required
Wave
The lighting will scroll in
the direction selected
with a default spectrum
of colors
Select either front-to-
back or back-to-front
wave direction
Static The LEDs will remain lit in
the selected color
Select the desired lighting
color
Breathing
The lighting fades in and
out of the selected
color(s)
Select up to 2 colors for
this setting
Reactive
The LEDs
will light up
when you click any of the
mouse buttons.
Select the desired lighting
color
You can further customize your Razer Mamba by accessing the Advanced
Chroma Configurator on Synapse.For more Razer Chroma lighting profiles by
the Razer community, and to share your own creation, please
visit:https://insider.razerzone.com.

8
REGISTRATION / TECHNICAL SUPPORT
REGISTRATION
Sign up now for a Razer Synapse account to get real-time information on your
product’s warranty status. To learn more about Razer Synapse and all its
features, visit www.razerzone.com/synapse.
If you are already a Razer Synapse user, register your product by clicking on
your email address at the Razer Synapse application and select Warranty
Status from the dropdown list.
To register your product online, visit www.razerzone.com/registration. Please
note that you will not be able to view your warranty status if you register via
the website.
Your product’s serial number can be found here
[Placeholder image]

9
FCC DECLARATION OF CONFORMANCE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residentialinstallation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the
receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.

10
FCC CAUTION STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement