RC4WD Mojave II User manual

Mojave II
1/10 SCALE TRUCK BODY

Recommended Tools
Modelling / Craft knife
Curved scissors
Side cutters
Instant glue/plastic cement
Hex drivers 1.5mm, 2mm
Cross head screwdriver (small)
Tips for Assembly
It is recommended that that body parts are painted with acrylic paint after
removing the parts from the parts trees but before assembly.
Test fit parts before applying glue and use glue sparingly.
It is best to use Non -whiting CA glue
Mojave II Body
ii

RC4WD Limited Warranty
All RC4WD products are warranted to be free of defects in materials and
workmanship when new. Our limited warranty does not cover damages due to
normal wear and tear, user error of assembly or installation, user modifications,
user's failure to perform routine maintenance, addition of aftermarket parts or option
parts. This warranty lasts as long as the original purchaser owns the product. In the
event of a defect under this warranty, RC4WD will, at our discretion, replace the
product, provided our inspection indicates that an original defect exists. RC4WD
reserves the right to replace any product which is no longer available with a product
of comparable value and function. If RC4WD determines the repair is not covered
under warranty guidelines, we will contact you to discuss your options. If you have
any questions, please contact us via email at [email protected]
Mojave II Body
iii

●1
●3 Glue required
All hardware should be taken from Bag B
Mojave II Body
1
Socket Head Cap Self Tapping Screws M2x6mm
Instant glue/plastic cement
●2

2
●4
●5
Mojave II Body
Button Head Cap Self Tapping Screws M3x6mm
Socket Head Cap Self Tapping Screws M2x5mm

●6
●7
Mojave II Body
3
Socket Head Cap Self Tapping Screws M2x5mm
Button Head Cap Self Tapping Screws M3x6mm

●8 Glue required
●9 Glue required
Mojave II Body
4
M1.6x5mm SHCS
Glue
Instant glue/plastic cement
Instant glue/plastic cement

●10 Glue required
●11 Glue required
Mojave II Body
Glue
Instant glue/plastic cement
Instant glue/plastic cement
5

●12
Mojave II Body
6
Button Head Cap Self Tapping Screws M3x6mm

Mojave II Body
7
●13
●14 Install rear light cover
M3x10mm BHCS
M3 Locknut

Mojave II Body
8
M2x8mm Tapping Screw
●15 Glue required
Glue
Instant glue/plastic cement

●17 The windshield needs trimming before installation
Mojave II Body
9
●16 glue required
M1.6x5mm SHCS
Glue
Instant glue/plastic cement

Mojave II Body
10
●18 Truck window installation
●19 The installation of dashboard sticker

Mojave II BodyMojave
11
●21 Windows and instrument panel installation
●20 Install the steering wheel and the mount
glue required

Mojave II BodyMojave
12
23
22 Glue required
1
2
Glue

Mojave II Body
13
●25 Glue required
Instant glue/plastic cement
M3x10mm BHCS
M3 Locknut
●24

14 Mojave II Body

Mojave II
Included parts
RC4WD Mojave II Body Set for Trail Finder 2 (Primer Gray) (Z-B0084)
RC4WD Mojave II Front Cab (Primer Gray) (Z-B0070)
RC4WD Mojave II Rear Bed (Primer Gray) (Z-B0072)
RC4WD Mojave II Cab Back Panels and Grill Parts Tree (Primer Gray)(Z-B0074)
RC4WD Mojave II Chrome Bumper and Parts Tree(Z-B0076)
RC4WD Mojave II Clear Parts Tree(Z-B0078)
RC4WD Mojave II Dash and Wiper Parts Tree (Black)(Z-B0080)
RC4WD Mojave II Rubber Mirror (Z-B0082)
Clear Lexan Windshield for Tamiya Hilux or RC4WD Mojave Body (Z-B0004)
RC4WD Mojave II Body Hardware KIT(Z-S1535)
1/10 Metal Emblem for Tamiya Hilux (VVV-C0007)
ARB 1/10 Roof Rack (Z-X0008)
Clear Lexan Windshield for Tamiya Hilux or RC4WD Mojave Body (Z-B0004)
Front Hood and Window Deflector Set for Mojave and Hilux Bodies (Z-S1377)
Lettering Kit for Mojave and Tamiya Hilux/Tundra Bodies (Z-S0551)
Leather Seats for Hilux (Brown) (VVV-C0071)
Leather Seats for Hilux (Black) (VVV-C0069)
Mojave Grill and Dash parts tree (Black) (Z-B0041)
Mojave Mirror and Wiper Parts Tree (Chrome)(Z-B0040)
RC4WD 1/10 4 Wheel Drive Emblem Set (Z-S1130)
RC4WD 1/10 454 Emblem Set (Z-S1136)
RC4WD 1/10 5.0 Emblem Set (Z-S1134)
RC4WD 1/10 RS Emblem Set (Z-S1135)
RC4WD 1/10 SS Emblem Set (Z-S1137)
RC4WD 1/10 Turbo Diesel Emblem Set (Z-S1132)
RC4WD 1/10 Super Charged Emblem Set (Z-S1138)
RC4WD 1/10 V6 Emblem Set (Z-S1131)
RC4WD 1/10 V8 Emblem Set (Z-S1133)
RC4WD Tightfit Truck Topper for the Mojave and Hilux Bodies (Z-B0047)
Rear Detailed Lenses for Tamiya Hilux, Brusier and RC4WD Mojave (VVV-C0103)
Rear View Mirror for Hilux, Bruiser, and Mojave (VVV-C0055)
Scale Bench Seat for Mojave Body (Z-B0032)
Mailing Address:
RC4WD
618 Blossom Hill Road, Ste: 201.
San Jose, CA 95123 USA
Web: rc4wd.com Email: [e-mail]
Optional parts
Mojave II Body
15