RCA RPJ402 User manual

This product has been manufactured and sold under the responsibility
of Curtis International Ltd.
RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are
registered trademarks or trademarks of Technicolor (S.A.) or its
affiliates and are used under license by Curtis International Ltd.
Any other product, service, company, trade or product name and logo
referenced herein are neither endorsed nor sponsored by
Technicolor (S.A.) or its Affiliates.

Fix the handle on the unit
Take out the handle tape, and fasten on the button on each side of unit.

plugged in the DC jack to this unit, the indicator light 2:
Red. ( When this red LED is on that means it's charging
for the internal battery. When the battery is full, the red
LED will turn to green. when it is in the state of low
power, the LED light 3 will turn Blue .And please
charge the unit immediately when blue LED light on.(If
used at home, it is recommended to plug in the power
adapter). Indicator light 1: Green.
The projector turned on and the screen will be on after
5 seconds.
Please make sure that battery is fully charged before use
this battery playback. Normally it needs to charge over 5
hours in the off mode.
LED light 3
LED light 2

Path 2: Press 'Menu' key from the remote or the unit to select 'Option'

LED light 1
LED light 3
LED light 2

MEDIA PLAYER

Indicator light 2: Charging -Red light;
9800mah.

And HDMI cable is excluded

Turn Bluetooth ON or OFF.
Bluetooth
Bluetooth
RPJ402
RPJ402
RCA
RCA
Panel Flip Rotate
Panel Flip Rotate Front