RCA ANT1250 User manual

High Power Amplified TV
Antenna
Thank you for choosing the RCA Amplified TV Antenna. You have
selected a fine product designed to provide years of performance.
Before attempting to use your antenna, please remove all parts from
the box and read the installation and use instructions carefully.
• Integrated 6 ft. Coaxial Cable
• 120 VAC, 60Hz to 12VDC, 200mA Wall Adapter
MIN
MAX
VHF
MIN
MAX
UHF
VIDEO
Five Year Limited Warranty ANT1250
ANT1250_IB 7/19/01 9:12 AM Page 1

Important Safeguards
• Read and follow the instructions before operating.
• Retain the instructions for future use.
• Follow all warnings on the adapter and instructions.
Water and Moisture
Do not use this antenna near water. Keep away from a bathtub,
sink, wet basement or swimming pool and other wet places.
Power Source
The wall adapter for this antenna should be operated only from a
standard 120 V, 60 Hz wall outlet. If you are not sure of the type of
power supply to your home, contact your local power company.
Ventilation
Slots and openings in the cabinets are provided for ventilation and to
ensure reliable operation and prevent overheating. Do not use on a
bed, sofa, rug, or similar surface.
Servicing
Do not attempt to service this antenna yourself as opening or removing
covers may expose you to dangerous voltage or other hazards and
voids your warranty. Refer servicing to qualified service personnel.
Cleaning
Unplug the antenna from the wall outlet before cleaning. Use a lint
free cloth for cleaning the outside of the unit only. Do not use aerosol
cleaners.
Important Information
Your antenna’s AC adapter operates on 120 volts AC, 60 Hz.
CAUTION:
• To reduce the risk of electric shock, do not remove the cover or back of
the AC adapter or antenna. There are no user serviceable parts inside.
• If you spill liquid on the AC adapter or antenna, disconnect the AC
adapter’s power cord from the AC outlet to prevent possible fire or shock
hazard and consult authorized service personnel.
• To prevent damage to internal parts, do not expose the antenna to moisture.
•Maintain electrical safety. Powerline-operated equipment or acces-
sories connected to this unit should bear the UL listing mark or
CSA certification mark on the accessories themselves and should
not have been modified so as to defeat the safety features. This
will help avoid any potential hazard from electrical shock or fire.
If in doubt, contact qualified service personnel.
2
ANT1250_IB 7/19/01 9:12 AM Page 2

Important Safety Instructions For
Antenna
Before using the AC adapter or antenna, read all instructions and
cautionary markings on the AC adapter and antenna.
Do not expose the AC adapter and antenna to moisture of any kind.
Use of any AC adapter not included with the antenna or recommended
or sold by the antenna manufacturer may result in a risk of fire, electric
shock, or injury and will void your warranty.
To reduce risk of damage to the AC adapter, do not pull on the cord to
disconnect from the wall outlet. Instead, disconnect the unit from the
outlet by pulling on the plug rather than the cord.
Make sure the cord is located so that it will not be stepped on, tripped
over, or otherwise subjected to damage or stress.
Do not operate AC adapter or antenna with a damaged cord or plug.
Replace it immediately.
Do not operate the AC adapter or antenna if it has received a sharp
blow, been dropped, or otherwise damaged in any way.
Do not disassemble the AC adapter or antenna. Incorrect reassembly
may result in a risk of electric shock. Disassembly of product by
unauthorized personnel will result in voiding your product warranty.
To reduce the risk of electric shock, unplug AC adapter from outlet
before attempting any maintenance or cleaning.
Do not install the antenna near heat sources such as radiators or air
ducts, or in a place subject to direct sunlight, excessive dust, mechanical
vibration, or shock.
Do not use alcohol, benzine, or thinner to clean antenna’s surfaces.
Be sure to save instructions for future reference.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK. NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN !
3
ANT1250_IB 7/19/01 9:12 AM Page 3

4
Installation
Hooking Up To The Antenna Input On Your TV Or VCR
Coaxial Cable Hook-up
1. Locate the “Antenna In” connector on the back of your TV or VCR.
2. Screw the end of the antenna cable to the “Antenna In” connector on the
back of your TV or VCR.
ANTENNA
75/300 ohm Matching Transformer Hook-up
1. Locate the “Antenna In” connector on the back of your TV.
2. Screw the Antenna cable into the 75/300 ohm transformer. Connect the VHF
and UHF antenna leads to the corresponding VHF and UHF screws on the TV.
ANTENNA
75/300 ohm
Matching Transformer
Turning Power On
The Antenna operates on DC power via a 120 VAC wall adapter.
Don't plug the wall adapter into any other power source.
To power your antenna:
1. Connect the power supply to your antenna by plugging the cord
into the jack marked 12VDC, 200mA on the back of the antenna.
2. Plug the wall adapter into a 120 VAC, 60Hz wall outlet.
3. Turn the antenna on by switching the 3 position switch to the AMP
position (located on the back of the antenna).
75/300 ohm Matching Transformer Not Included
ANT1250_IB 7/19/01 9:12 AM Page 4

5
Your cable, satellite, or DBS Satellite System can be directly connected to
the Antenna allowing access to off-air local programming. By a simple
flick of a switch on the back of the antenna, you can switch from your
local off-air programming to cable, satellite or DBS Satellite System
programming.
1. Connect the power supply to your antenna by plugging the cord
into the jack marked 12VDC, 200mA on the back of the antenna.
2. When the switch is in the CABLE IN position, the signal from your
cable, satellite, or DBS Satellite System will pass through the antenna
to your TV or VCR without interference.
3. To hook-up your cable, satellite, or DBS Satellite System to the antenna,
connect the “OUT TO TV” cable from the antenna to the TV or VCR
connector marked “IN FROM CABLE”.
4. When the switch is in the AMP position, you will receive local
programming from amplified off-air signals via the antenna.
5. When the switch is in the BY PASS OFF-AIR SIGNAL position, the
off-air signal will travel to the TV without amplification. Use this
position when the antenna is used near transmitters and
amplification is not necessary.
A B C D
A
B
C
D
3 Position switch
Cable connector
Integrated Coaxial Cable
Power Insert
Hooking Up a CABLE, SATELLITE or DBS
SATELLITE SYSTEM to Your Antenna
ANT1250_IB 7/19/01 9:12 AM Page 5

6
Tuning and Adjustments
Take the following steps to tune and adjust your antenna.
1. Select the channel you want to watch.
2. Turn the antenna power on by switching the 3 position switch to
the appropriate position.
3. Move the extended dipoles (channels 2-13) or the loop
(channels 14 and higher) until you get the best picture possible.
4. Increase the antenna power by turning the UHF or VHF Power
Control Dial clockwise until you get the best picture possible.
5. This process may need to be repeated each time channels
are changed.
MIN
MAX
VHF
MIN
MAX
UHF
UHF & VHF Power Control Dial
VHF Dipole
UHF Loop & Reflector
MIN
MIN
MAX
UHF
3 Position Switch
VHF Dipole
ANT1250_IB 7/19/01 9:12 AM Page 6

Other RCA Accessories
Several accessories are available that will enable you to expand your home
video system. To order any that are listed below or to find out what other
accessories are available contact your local RCA dealer, complete the order
form, or call 1-800-338-0376.
Universal Remote Control
(RCU800)
A full featured remote that offers the versatility of
operating both video and audio components. It controls
up to 8 components and includes code search,
advanced PIP and menu controls, DBS satellite system
compatibility and a toll-free consumer help line.
Surge Suppressor
(SCP40)
Get full surge protection for your phone line, eliminate
interference from noise entering through power lines
and protect your valuable equipment from most harm-
ful power spikes. 6 heavy duty grounded outlets and
in/out phone line jack.
$39.95
$19.95
ANT1250_IB 7/19/01 9:12 AM Page 7

Accessory Order Form
See Your Local RCA Dealer
Or Order By Phone
• Have Your Credit Card Ready
1-800-338-0376
Model # Description Price Qty. Total
RCU800 Universal Remote Control $39.95
SCP40 Surge Suppressor $19.95
Amount of Order
Add App. Sales Tax
Incl. Post. & Handling 5.00
Total Amount of Order
Name __________________________________________________________________
Address ________________________________________________________________
________________________________________________________________________
City __________________________ State __________ Zip ____________________
Daytime Phone No.___________________________________
❏Money Order Enclosed ❏Check Enclosed
Credit Card: ❏Visa ❏ MasterCard ❏Discover
Account Number: ■■■■■■■■–■■■■■■■■–■■■■■■■■–■■■■■■■■
Exp Date ___ /___ /___ Signature__________________
Mail To: Thomson Consumer Electronics
P.O. Box 8419
Ronks, PA 17573
TO ORDER BY MAIL
• Prices are subject to change without notice.
• Applicable State Taxes Apply.
• Allow 4 Weeks for Delivery
ANT1250_IB 7/19/01 9:12 AM Page 8