RCBI Roadscan Pro DE Series User manual
My Driving Recorder!
ඖVEDR (Video Event Data Recorder)
ඖContinuous Recording
ඖDT (Digital Tachometer)
[This product is the VEDR system for vehicles.]
- We do not take responsibility for the malfunction and accident caused by
inappropriate use, mounting and alteration.
and keep it well to read if and when needed.
ඖSoftware provided by this product is designed to operate on the PC with
Windows XP/Vista installed.
ඖmanual and the actual product depending on the subsequent update.
*Product guide
1. Caution during use ---------------------------------------------------------------- 4
3. Names of each part --------------------------------------------------------------- 7
4. VEDR function ---------------------------------------------------------------------- 8
5. Continuous Recording Function ---------------------------------------------- 10
6. DT Function -------------------------------------------------------------------------11
7. Button’s function ------------------------------------------------------------------ 12
8. Guide on LED Display and Buzzer Sound ----------------------------------- 13
9. Product Upgrade ------------------------------------------------------------------ 15
10. Google Map Use ------------------------------------------------------------------15
* Software guide
1. Software Installation --------------------------------------------------------------16
2. Login ----------------------------------------------------------------------------------19
3. Description of Software Screen ---------------------------------------------19
4. Function and Description of Button -------------------------------------20
5. Description of Data Information Display -------------------------------30
6. How to download and play data ------------------------------------------31
7. Acceleration data interpretation method ------------------------------33
8. Impact assessment graph --------------------------------------------------34
9. Description of DT Mode Window --------------------------------------- 34
*Installation guide
1. Caution during installation ------------------------------------------------ 35
2. Mounting ----------------------------------------------------------------------- 36
3. Mounting sequence ----------------------------------------------------------37
4. Wiring Guide ------------------------------------------------------------------- 39
*Before suspecting malfunction-------------------------------------------40
*Product specs and operation environment --------------------------41
*Warranty policy ----------------------------------------------------------------42
Table of contents
1. Caution during use
This guide ensures user’s safety and helps to use the product properly.
Read carefully and use carefully.
operation, and user may not be entitled to free service if and when
product malfunction is caused by user’s fault.
2) Do not spray water directly to clean up the vehicle’s interior. This may
Avoid contact with chemicals or cleansers since they may alter the
surface, damaging the interior of the device.
3) Excessive shock or insertion of alien substance is prevented. Excessive
force, shock or insertion of alien substance such as beverage may cause
malfunction. Thus, be careful about this point.
4) If and when alien substance or sticker present in front of the product’s
cautious of cleanness at the front part of the main body clean. Moreover,
against the mirror. Therefore, do not place other product near the
installed product.
when the location is moved even when it operated normally. Therefore,
mount sturdy during installation. Do not move or shock the device by
using excessive force after installation is completed.
changed due to long time use, or when exposed to severe vibration
when driving on dirt road. Adjust to the original angle while stopped on
7) Be especially careful since watching the product or maneuvering it
while driving may cause accident.
8) Be careful to avoid excessive shock and contact with humidity and
salinity, and be careful since malfunction may result when product is
subjected to pressure or shock after product mounting due to the
twisting of the location.
Product guide
Product guide
9) VEDR data may not be recorded during accident with lower than
function)
aware of this point.
11) Product may be upgraded after launch to add on more functions
and to increase customer convenience.
12) Time is re-set automatically depending on the GPS time
information.
13) The supplied SD Card has a limited life time so you are to replace
the SD Card by a new one after long term use. Using the Roadscan Pro
constant in Continuous Recording mode results in the shortest SD Card
life time. VEDR Recording mode provides the longest SD Card life time.
14) This device is designed to pass the EU and US EMI standard.
However, distance between device and broadcasting reception antenna
should be at least 10 cm since there may be intervention with other
device.
15) All rights to this product’s hardware, software and data belong to
the manufacturer. Unauthorized copying, processing and distribution
may be subjected to compensation for damage according to the civil
law or to criminal punishment according to the Intellectual Property
Right Protection and Management Law.
16) Do not separate SD Card from main body when power is on and
17) It might not be operated on some SD Cards. Please purchase and
use recommended SD Cards only.
Product guide
[Check to see whether all the components included in the following
diagram are included.]
1) Main body
2) SD Card (Including User Manual and Software)
3) SD Card Reader
4) External Switch
5) Cable Mount
Main body
External Switch SD Card SD Card Reader
Cable Mount
Product guide
Main body is comprised of the module that processes and assesses status
on the camera, current image and situation with the internal CPU.
>>Name of main body’s each part is shown on the following diagram.
3. Names of each part >)URQW@>5HDU@&DPHUDOHQV+HDG)L[LQJ%XWWRQ6'&DUGLQVHUWLRQSDUW0,&)1%877215(&%87721
Product guide
[Event Recording]
When impact is felt by the vehicle, this device detects the shock
automatically, and records the image on a real time basis before 15sec.
/after 15 sec. an accident. At the same time, the device records
information related to time and vehicle’s 3-axis acceleration data, GPS
location information and speed information etc.
Impact results in case of vehicle accident, sudden braking, sudden curve,
irregular road surface, and impact to the main body and it is possible to
adjust impact level. When the impact level is low, recording takes place
frequently as the device detects even the minor braking. Storing does
not take place often when the impact level is high, but this in turn may
not record minor collision.
Saved accident data are stored into the internal Flash Memory and
downloaded to SD Card for about 10 seconds. After data download,
accident images are preserved within the internal Flash Memory as it is.
If SD Card is not inserted and data are stored in the internal Memory, you
can insert SD Card and press FN button for 3 seconds to all of contents of
Flash Memory to SD Card.
[Manual recording function]
This is the function that records image regardless of impact level. Press
on the REC button located at the back of the main body to record image
of setup before / after time, acceleration, and GPS location speed
information. Using this function when image is not recorded due to
minor collision enables you to record the data.
4. VEDR function
Product guide
NOTICE :The VEDR mode is disabled during Continuous Recording mode. To enter the VEDR mode
user must press the FN button once. VEDR mode starts. By pressing FN button again the VEDR mode
stops and the Continuous Recording mode re-starts . If no SD-card is installed , the Roadscan enters
automatically the VEDR mode, Continuous Recording mode is disabled.
[Stable image storing function using back-up power]
In the case of large accident, there is a potential that power will be
severed. However, accident image is saved safely even when power is
severed thanks to the built-in back-up power located in the main body.
At this time, however, image is recorded up to the point when power is
severed for safe image of accident storing, and does not record data
afterwards. Moreover, frames per second of the image may be lower
than the normal frames per second.
[Recording function that uses built-in Flash Memory]
It stores data that occurs due to impact and GPS data to be used for DT
using internal Flash Memory regardless to SD Card.
This product stores images and data up to 60 times for 15 seconds
before and after an accident (total 30 seconds) to allow check image
data using Manager Program mounted on SD Card. (If any accident
occurs after 60 times of accident images are stored, the oldest data is
deleted and new image is stored in the place.)
[Correct Use of SD Card]
If you insert or pull out SD Card during operation of
Card than the one provided when purchasing the product, be sure to
use recommended SD Card for normal operation.
[Capacity of SD Card]
Minimum available SD Card is 2G SD Card, of which 1G byte is used for
copying internal Flash Memory only.
[Image and Vehicle Data Analysis Function]
It is possible to analyze image and data at that time using provided
VEDR software.
Product guide
5. Continuous Recording Function
[VEDR Impact Level]
It is possible to set up impact level at which the product recognizes that
it is an Event.
Value that is applied to the vehicle.
Type
Remarks
Recording
Pattern
Impact
Level Setup
Range
Initial
Impact Level
Normal Impact Critical Impact Recording upon
REC button and
External Switch
Recording upon
and radical driving
Recording upon
large impact
When user presses
REC button or External
Switch upon necessity
0.1G ~ 1.9G 1G ~ 2G
0.7G 1.1 G
Overwritten Not overwritten To manage as same as
Normal Impact
When the product is powered on, it starts Continuous Recording
automatically after 20 seconds, and when FN button is pressed, it stops
Continuous Recording function.
It may use up to 16G SD Card that saves images for 12 hours with high
resolution or 25 hours with medium resolution. (See software guideline.)
Card.
Product guide
DT function is to store route, time and speed during driving of the
vehicle.
DT data can be downloaded to SD Card by pressing FN button for
3seconds.
[Recording Time]
Total recording time of DT is about 30 days when driving for 24 hours a
day. Afterward, the oldest data is deleted.
[Speed, Location, Time Recording]
This product stores speed, location and time every 10 seconds when it
is connected to GPS.
[Speed]
It shows speed as a graph via speed window so as to allow more
accurate analysis of driving record. In addition, it displays speed on the
car speed meter panel to allow easy analysis.
[Location]
It shows latitude and longitude as numbers equivalently, but graph
display depends on use of Google Map.
When driving route display is enabled: It connects to Google Map to
display the current location on Google Map, and when DT data is
played, it displays changing location over time. At that moment, Google
Map can be expanded or reduced.
When driving route display is not enabled: It displays the entire route as
a line.
6. DT Function
Product guide
7. Button’s function
[REC button]
It is possible to record image manually by using REC (Record) button.
Press on the REC button to record image manually, and image and
information is recorded in Flash Memory and move to SD Card
automatically.
! Caution
event may not result in the case of minor contact accident or in the
case of contact accident involving vehicles that are moving at the same
speed. In this case, press on the REC button to record before and after
image for the time designated for recording.
[FN Button]
Continuous Recording is automatically started 20 seconds after the
product is powered on. When you press FN button, Continuous
Recording is stopped, and pressing it again, Continuous Recording is
started again.
To transmit event data and DT data stored in the internal
Flash Memory to SD Card you must press the FN button for 3 seconds.
FN BUTTON
REC BUTTON
Product guide
8. Guide on LED Display and Buzzer Sound
[Description of LED Display]
LED Status Status
Blink
On
On
On
Blink
Blink
Abnormal state on the device.
Operating status with power or battery.
Status with no SD Card or unrecognized SD Card.
Storing images or upgrading device.
SD Card is normally operated.
GPS communication is not active.
GPS communication is available but location is
Product guide
[Buzzer Sounds and LED Display upon Operation of Product]
6[RG)WKFG6KOG$W\\GT5QWPF.'&+PFKECVQT4GOCTMU6WDUW&RQWLQXRXV5HFRUGLQJ(YHQW5HFRUGLQJ5(&%XWWRQ([WHUQDO6ZLWFK'RZQORDG)ODVK0HPRU\!6'&DUG$IWHUERRWLQJ%HHS%HHS%HHS6KRUW%HHS%HHS%HHS%HHS%HHS%HHS%HHSa/RQJ%HHSa/RQJ32:(56'&$5'DQG*36DUHWXUQHGRQDQGRIILQRUGHU6WDUWVWRUDJH,QVWRULQJ&RPSOHWHG6WDUWVWRUDJH,QVWRULQJ,QVWRULQJ&RPSOHWHG&RPSOHWHG$IWHUSUHVVLQJEXWWRQ,QFKDUJLQJ1RUPDOVWDWXV/('EOLQNVVORZO\/('EOLQNVIDVW$IWHUSUHVVLQJ5(&EXWWRQVWRUDJHVWDUWV%HHS6KRUW%HHS6KRUW%HHS6KRUW6'&$5'EOLQNV6'&$5'EOLQNV6'&$5'EOLQNV6'&$5'EOLQNV6'&$5'EOLQNV6'&$5'EOLQNV6'&$5'EOLQNV6'&$5'EOLQNV6'&$5'WXUQHGRQ6'&$5'WXUQHGRQ6'&$5'WXUQHGRQ6'&$5'WXUQHGRQ6WDUW,QGRZQORDGLQJ'RZQ&RPSOHWHG
Product guide
(Functions by
pressing the
FN button for
3 seconds)
9. Product Upgrade
10. Google Map Use
This product may be subject to change of software in the future for
the purpose of performance improvement, etc.
Upgrade can be supported through websites of manufacturer and seller
and upgrade and installation should be executed by the user personally
in principle.
If you want to receive update through visit, please use the customers
center of the manufacturer or seller.
1) Connect SD Card to PC.
3) Insert SD Card to the product and power it on, upgrade is automatically
progressed.
ೢHow to upgrade the product
Google Map use is provided with charge up to 100 counts. If you want
to use it afterwards, connect www.iplk.com to pay charge.
The URL above may be changed upon situation of the company.
Product guide
1. Software Installation
(1) Connect provided SD Card to PC.
(2) Open program folder within SD Card.
(3) Run setup.exe within program folder.
(4) When a screen is displayed as below, press“Next” button.
(5) When a screen is displayed as below, press“Next” button.
Software guide
Software guide
(6) When a screen is displayed as below, press “Next” button.
(7) When a screen is displayed as below, press“Next” button.
Software guide
(8) When a screen is displayed as below, press “Install” button.
(9) When program installation is completed, a screen is displayed as
below. Press “Finish” button to end installation.
Software guide
2 . Login
3. Description of Software Screen
In order to use Google Map, it is required to enter provided ID and Password.
(1) Menu Button
˧It includes functions such as File View, Download, Device Setup, etc.
(2) Display Window
˧It displays images of Event data or DT data.
(3) Google Map
˧It shows location information of data via Google Map.
(4) File List Window
˧
(5) Graph Display window
˧It displays acceleration data, impact data and speed data in sequence.
(6) Driving Information Display Window
˧It displays time information, location information, acceleration information,
driver information, etc. of data.
(7) Progress Bar
˧It displays progressing rate when executing download or other functions.
1
2
3
4
5
6
7
Software guide
Use 6 character ID code, not email address
Use 6 character PW code.
Table of contents
