RCS SOUND-BELT 2 SB-020 User manual

OPERATING INSTRUCTIONS ENGLISH
SB-020
SOUND-BELT 2
WarrantySpecification
Multifunction amplifier
(Recording / Portable speaker)
Technical data SB-020
RMS 10W
Max 20W
Battery Lithium (7.4v 1000mAh)
Frequency Range 50-17KHz
S/N >80db,
Dimensions (WxDxH) 80 x 31.5 x 106mm
Charging Input 1 00V-250V, 50Hz-60Hz,
Charging Output 9V, 1000mA,
Use Time 8 hours
Standby Time 20 hours,
Recharging Time 3-4 hours
Weight 210g
© Copyright by RCS AUDIO-SYSTEMS GmbH.
Publication and duplication of the contained data only allowed with our strict permission.
Hardware and Software specifications subject to change
without notice.
• Our products are manufactured under strict quality
control and inspection process.
• Please contact your original dealer or our service
center to claim service of a defect arises under the
normal use and within warranty period.
• The repairing or replacement charge will apply to
the service, when claim received by RCS AUDIO-
SYSTEMS is not within warranty period, and damage
is not caused by defects in material and workmanship.
• The end user holding the valid warranty card can only
request the service in the country where product is
purchased.
Delivered by:
RCS14.01.2019

Functions FunctionsIntroducion
What’s in the box?
This product is a power amplifier and speaker in a
portable multi-functional voice amplifier for on-site
training, small karaoke, meetings, and more.
With the built-in high-capacity lithium battery, the audio
input can be used to connect computers, MP3, MP4,
mobile phones and other audio devices.
SB-020
Stereo cable
Waist belt
Neckworn Mic
Manual
DC Charger
Notice
When you use the microphone, the front of the microphone
to your lips is the best position. Otherwise, the efficiency
of the microphone and the audibility of the speech will be
reduced.
By power on, a green light is switched on. The red light
blinks slowly when the battery power is low. During char-
ging, the red light will always flash. Green light blinks when
the battery is fully charged.
Use the device with the battery, the charging time should
be kept between 4-6 hours. If you charge for a long time
or charge too little, it may affect the life of the batteries and
the device. Also, a very long storage may cause the battery
to lose its energy.
How to use the tone button
Turn right: clear and high vocal tone
Turn left: Thick and rich vocal tone
MIC
Socket
Power
LED
Tone
VOL
◊ Connect it with other
audio devices or PC
◊ Please use the DC charger included.
Other chargers should be used with
caution.