Recoda M705 Series User manual

User Manual for Mobile DVR
1
4CH Mobile DVR USER MANUAL
M705 Series
Ver. 2.0
RECODA

User Manual for Mobile DVR
2
Contents
1. ....................................................................................................................................... 4System Introduction
1.1. .............................................................................................................................................. 4Features
1.2......................................................................................................................................... 5Appearance
1.3. ................................................................................................................................. 6Remote Control
1.4. ......................................................................................................................................... 7Front panel
1.4.1. ...................................................................................................................... 7LED indicators:
1.4.2. .................................................................................................................................... 7Others
1.5. ......................................................................................................................................... 8Back panel
2. ................................................................................................................................................ 8Specifications
3. .................................................................................................................................... 9Technique Parameters
4. .............................................................................................................................................................. 10GUI
4.1................................................................................................................................................. 10Login
4.2. ..................................................................................................................... 11System Main Interface
4.3. .................................................................................................................. 11Video Records Playback
4.4. ............................................................................................................................... 12System Settings
4.4.1. ...................................................................................................................... 13Basic Settings
4.4.2. ............................................................................................................... 13Recording Settings
4.4.3. ............................................................................................................. 16Power Management
4.4.4. ..................................................................................................................... 17Alarm Settings
4.4.5. .................................................................................................................. 20Security Settings
4.4.6. ................................................................................................................ 20Network Settings:
4.5. ...................................................................................................................................... 24System Info
4.6. ........................................................................................................................... 24Management Tools
4.6.1. ................................................................................................................. 25Log Management
4.6.2. .......................................................................................................... 26SD Card Management
4.6.3. ................................................................................................................... 27Default Settings
4.6.4. ............................................................................................................ 27Config Management
4.6.5. ................................................................................................................... 28System Upgrade
5. ................................................................................................................................... 30Installation guideline
5.1. ..................................................................................................... 30M705A and M705B Pictures
5.1.1. M705A................................................................................................. 错误！未定义书签。
5.1.2. ................................................................................................................................. 31M705B
RECODA

User Manual for Mobile DVR
3
5.2. .............................................................................................................................................. 31Cables
5.2.1. ......................................................................................................................... 31Power Cable
5.2.2. ........................................................................................................................ 32GPS Antenna
5.2.3. ......................................................................................................... 32AV input /output cable
5.2.4. .............................................................................................. 33Alarm input and output cable
6. .......................................................................................................................... 34Device Upgrade Guideline
6.1. .............................................................. 34M705X-RFS-*******.crc（Document system）upgrade
6.2. ......................................................... 35M705X-APP-*******.crc（Application program）upgrade
6.3. .................................................................................................................................. 35MCU upgrade
7. ....................................................................................................................................... 363G User Guideline
7.1. ...................................................................................................... 36Working System Representation
7.2. ........................................................................................................................... 36Parameter Settings
7.2.1. ................................................................................................................... 36Network Setting
7.2.2. .................................................................................................................... 38Wireless setting
7.2.3. ................................................................................................................. 38Statues check out
7.3. .......................................................................................................................... 38PC software setting
8. ........................................................................................................................................................... 39F.A.Q
RECODA

User Manual for Mobile DVR
4
1. System Introduction
1.1. Features
H.264 main profile Video compression format; Support 1 to 4 channels video input.
Adopt 10bit video decoder processor to ensure picture quality, and each video channel is attached with an
independent video decoder to avoid disturbing from each other.
Industrial grade design: all electronic components conform to industrial standard through the entire design,
including the special connectors dedicated for mobile DVR.
Built-in GPS, G sensor (optional).
Built-in wireless module like 3G (EVDO, HSPA, HSDPA), GPRS, WiFi (optional).
Support IP call function (optional).
G.726 audio compression, 4CH audio input, 1CH audio output.
With the special UPS technology, the DVR will work for another 10 to 15 sec after power failure, which
makes the device shut down normally and keep the file safe
Real time recording: 100f/s (PAL); 120f/s (NTSC). Recording resolution: CIF/ 2CIF/ D1 optional,
maximum support 2CH of D1 + 2CH of CIF.
6CH alarm input (Level input), 1CH alarm output (Relay output)
RS232 interface for remote control; RJ45 10M/100M Ethernet port.
Video recording mode: Auto, alarm, timed and manual recording.
The video file format is ASF. The file can be played by general media player VLC or our customized
software which support 1 channel or 4 channels synchronous playback
Storage: Maximum 1pcs 2.5” hard disk with removable hdd housing plus 1pcs 32 GB SD card. Support
HDD heater funtion, and SD card connector import from Japan
Quick start-mode: the device will turn to working in 25 sec after power on. Other start- or close- mode
including ACC on, timed turn on/off, manual boot/shutdown the device.
Voltage supply range is from 8V to 36V, the DVR is compatible with the most of vehicles. Power output is
12V/1.5A.
Energy- efficient design, the power consumption is less than 5W with normal operating state.
With anti-vibration and anti-high temperature protection, the quality of video files is always guaranteed
Operating temperature: -25℃to +70℃
All materials and PCB production conform to RoHs standard.
Elegant and industrial design: Mini size, for easy installation, more concealing.
RECODA

User Manual for Mobile DVR
5
Dimensions: 160(W) x200(H) x62(D) mm Weight: 2200g
1.2. Appearance
Front view:
Back view:
RECODA

User Manual for Mobile DVR
6
1.3. Remote Control
KEY Function Picture
To activate the device
【LOGIN】To enter system settings.
【0－9】【0－9】: Under the configuration mode, 0~9 stand for numbers; under
the playback mode, 1, 2, 3 and 4 are for switching between related
single channel, and the number 5 is for 4 channels synchronous
playback
【－】【＋】 For data setting
【DEL】Backspace
【EXIT】Return to the previous interface
【ENTER】Enter button
▲, , , up, down, left, right
left and right buttons are use for decreasing or increasing volume
【GOTO】Select time period for playing video
【INFO】To display system info under monitoring mode
With the backward playing button, the video files can be played with
2/4/8/16 times speed. Press ‘play’ button to get a normal speed play.
Play button
With the forward playing button, the video files can be played with
2/4/8/16 times speed forwardly. Press ‘play’ button to get a normal
speed play.
Record button
Stop button is to stop the normal playing and return back to the playlist
interface
Pause button. Pause the normal playing.
【F1】For M705B only. Under monitoring mode, it is used to display the info
of G-sensor, GPS, wireless module, SIM card, dial-up and so on.
【F2】Single channel monitor, display terrace situation
【F3】Reserve
RECODA

User Manual for Mobile DVR
7
1.4. Front panel
1.4.1. LED indicators:
【PWR】Power LED：LED light means system has powered on
【ALM】Alarm LED
【REC】Record LED: LED Light means device is recording
【HD】HDD, light on means load successfully. Lights off means load failure. Flicker means video
recording.
【GPS】GPS signal
【ERR】Error prompt
【V-Lo ss】Video Loss
【HTR】Heater
【SD】SD card. Light on means load successfully. Lights off means load failure. Flicker means video
recording.
【NET】Network
1.4.2. Others
【IR】Infrared receiving terminal
【LOCK】HDD Lock, device cannot to start without lock
【MIC】MIC input
【EAR】EAT output
RECODA

User Manual for Mobile DVR
8
1.5. Back panel
● 【PWR】Power connector
● [2]【GPS】GPS antenna connector
● 【EXTEND I/O】Extend I/O connector
● 【RJ45】Network connector
● 【AV I N 】AV inpurt connector
● 【AV O U T 】AV output connector
● [2]【WIFI】WIFI antenna connector
● [2]【3G】3G antenna connector
[2]:：GPS 、WIFI and 3G antenna use for device M705B
2. Specifications
Function Item Description
Channel 1-4 channels
Resolution Support CIF、HD1、D1 resolution, compatible with 2CH of D1 & 2CH of CIF. fps:
1 to 25f/s/ch adjustable (PAL) or 30f/s/ch (NTSC) .
Video Quality 1-5 levels, 1 is the highest level and 5 is the lowest level.
OSD Overlays information such as date time and vehicle ID, vehicle number
SD card REC Support two SD card recycle recording. Automatically switch to the other one
when the first SD card was full, and the data will be automatically overwritten .
Recording Mode The default setting is auto recording after power on. Timed recording and alarm
recording are supported.
Preview Support 1 channel and 4 channels preview.
Recording
System
Disk Data Support SD cards overwritten function.
RECODA

User Manual for Mobile DVR
9
overwritten
Video Search Search video files anytime per day, type(n/a) and target SD card.
Support 1 to 4 channels playback.
Playback
System Playback
Support forward and backword play at the speed of: x 2,x4,x8,x16.
GUI Graphical User
Interface Setup system parameters with the remote control.
Support up to 6 channels alarm input.
Input Pre-record 10 seconds ahead of the alarm.
Record duration after alarm can be set in system
Alarm
Output Support up to 1 channels alarm output, level signal.
GPS GPS module can be built-out device M705B, the GPS info will be recorded
synchronous；M705A Support external GPS module
RJ45 Ethernet port. Selectable with innor 3G wireless transfer, WCDMA,
EVDO, HSPA，TD-CDMA.ETC. （GPRS, EDGE, WiFi for customized），
with M705B。
Network
M705B supports several wireless modules such as 3G and WIFI
Optional
Function
G Sensor Built in G-sensor is available with M705A and M705B
Power Settings
System auto power on/off:
1,Vehicle acc on/off---system auto power on after acc on, system power off
according to the delay time (up to 240min, default 5min) after acc off.
2,Preset time---Only according to time preset table.
Others
Power-off
protection
With the power-off protection, all data can be saved safely and the recording can
be closed normally after power failure.
3. Technique Parameters
System
Processor/System Hisilicon Hi3512 H.264 main profile Linux(2.6)
Security Two level password protections for administrators and users
OSD Character-overlap on record video with date, vehicle ID
Video/Audio& Alarm
Video Input/Output Input: 4 CVBS, 1.0Vp-p, 75Ω; Output: 1 CVBS, 1.0Vp-p, 75Ω
Video Stream Standard Standard ISO14496-10
Revi Function 1 channel or 4 channel revi mode
Audio Input/Output Input: 4 channel Output: 1 channel
Audio Recording Synchronized with video
RECODA

User Manual for Mobile DVR
10
Audio Compression G.726 5KB/s
Alarm Input/Output 6 channels input;1 channel output
Video Recording
Recording Resolution D1/HD1/CIF, MAX:2 channels of D1 and 2 channels of CIF
Record Quality 1-5 levels, 1 is the highest level and 5 is the lowest level.
Record Mode Default: Auto Record. Other modes: Timed and Alarm Record (Optional)
Record Storage Maximum support one 32GB SD card and one 2.5 inch hard disk.
Record Search Search Video Record according to record time, record mode and record storage
device etc.
Record Playback Max support 4 channels playback synchronous.
Others
Communication Interface RS232 interface for remote control; RJ45 10M/100M Ethernet port.
Wireless Transfer Built-in 3G (WEVDO,CDMA200,TD-SCDMA) or optional GPRS,WIFI and EDGE
Module GPS and G-Sensor built-in
Temperature/Humidity Normal Temperature: 0℃~ +50℃Heater: -25℃~ +50℃Humidity: 20% to 80%
4. GUI
4.1. Login
LOGIN
LOGIN
DEV ICE NO
DEV ICE NO ： ：00000 00000
USER NAME
USER NAME ： ：user / admin user / admin
PASSWORD
PASSWORD ： ：****** ******
LOGIN CANCEL
Factory Default Username: admin
Factory Default Admin Password: 888888
Factory Default User Password: 111111
RECODA

User Manual for Mobile DVR
11
Attention: If the administer closed security setting, you will directly go to the main menu without login.
4.2. System Main Interface
The main interface will be displayed on the screen when you login successfully, it contains
4.3. Video Records Playback
Select ‘Playback’ icon with left/right/up or down key and press ‘enter’ key to get below interface
REC SEARCH
REC SEARCH
REC TYPE：ALL/ALARM
DISK SELECT：SD/HDD
DATE：2009/05/27
START TIME：00：00
END TIME：23：59
31
31
30
30
29
29
28
28
27
27
26
26
25
25
24
24
23
23
22
22
21
21
20
20
19
19
18
18
17
17
16
16
15
15
14
14
13
13
12
12
11
11
10
10
09
09
08
08
07
07
06
06
05
05
04
04
03
03
02
02
01
01
SEARCH
Note:
System will highlight the valid recording info in yellow color
RECODA

User Manual for Mobile DVR
12
"REC TYPE": press the【Enter】button to select All or Alarm. The default setting is All.
“DISK SELECT ": press the【Enter】button to select the SD card:The default setting is SD1.
"DATE": Default is current day. Press digit keys to reset
"START TIME": Press digit keys to setup the start time, default setting is 00:00.
"END TIME": Press digit keys to setup the end time, default setting is 23:59.
"SEARCH": Take curser move to "SEARCH" and press the【Enter】key to see the result.
SEARCH RESULT
SEARCH RESULT
TYPE RES START END CH SIZE
Normal D1 15：30 16：00 1 154M
Alarm D1 15：30 16：00 2 53M
Normal CIF 15：30 16：00 3 100M
Alarm CIF 15：30 16：00 4 98M
DATE：2009/05/27
UP DOWN LASTFIRST
Press direction keys to view recording information, press【Enter】to play , press【ESC】to return back;
Press direction keys to select "FIRST", "UP", "NEXT", "LAST", and press 【ENTER】to enter the
corresponding page.
4.4. System Settings
SYSTEM SETUP
SYSTEM SETUP
RECODA

User Manual for Mobile DVR
13
4.4.1. Basic Settings
BASIC SETUP
BASIC SETUP
DATE TYPE：Y/M/D
DATE：2009/05/27 09：01：30
TIMEZONE：GMT +08（00~+12 / -01~-12 ）
IDLE TIME：30（s）（Default 30 senconds）
Three type：Y/M/D, D/M/Y, M/D/Y
COMPANY NAME：Company Name
VEHICLE NO：00000
DRIVER NAME：Driver Name
DEVICE NO ：11111 （Default 30 senconds）
BUS LINE NO：Line number
SAVE
“DATE TYPE”: year/month/day, day/month/year or month/day/year. Press 【ENTER】to select.
“TIMEZONE”: Default GM+08, can selectable with 【－】【＋】or 【ENTER】
"DATE": Alterable with number button.
"TIME": The same setup as “DATE”.
"OPR TIMEOUT": All system Interface closed time, default time is 30s, range 30s—3600s. Press digit keys to
setup the operating closing time.
"DEV NUM": It refers to the device ID. Press digit keys to setup the ID. While the client uses only one remote
control for multi device, please setting with different device number and password. Device number should
be 5 number, rename please push ’DEL’ to clear up the record, end enter the new device number.
"COMPANY NAME", "VEHICLE NO", "DRIVER NAME",”LINE NUM”: Press 【Enter】key to get the
keyboard window displayed, and use left/right/up/down/enter key to setup.
Select “SAVE” and press 【ENTER】to save the settings.
4.4.2. Recording Settings
Recording data setting
RECODA

User Manual for Mobile DVR
14
RECORD SETUP
RECORD SETUP
SYSTEM：PAL/NTSC
ALARM DELAY：
30（30～1800S）
OVER WRITTEN：ON/OFF
RESOLUTION：D1/HD1/CIF
AUDIO ：ON/OFF
ON/OFF
ON/OFF
25/30
25/30
1
1（ （1~5 1~5） ）
CH1
CH1（ （1~4 1~4） ）
RECORD
RECORD
FRAME RATE
FRAME RATE
QUALITY
QUALITY
CHANNEL
CHANNEL
TIME SLICE： 15/30/45/60 (M)
SAVESUB-STREAM
BITRATE：
D1（2048 /2000 /1600 /1400
/1200 /1000 / 800 /600）HD1（1500 /1300 /1100
/900 /800 /700 /600 /500）CIF（1200 /1000 /800
/700/ 600/ 500/ 400 /300）
RECORD MODE： AUTO/TIMED/
ALARM/MANUAL
SD FUNCTION： NO REC/MIRR REC/
LOST REC
TIME LIST
"SYSTEM ": Press 【ENTER】key to select PAL or NTSC
"RECORD MODE": AUTO / Timed / Manual, default AC record, press 【ENTER】to select.
"RESOLUTIONS": Press the【ENTER】to select D1, HD1 or CIF, default D1. Please note 4 channels will
be set Synchronously, e.g. if you set “CIF”, the CIF resolution will apply to all channels; However if you set
the resolution as D1, this setting will apply to ch1 and ch2+ CIF will apply to ch3 and ch4. The resolution
doesn’t relate with the below “Channel” “Quality” “Frame Rate””Record” directly. Default 1600KBPS，
alterable with【ENTER】or【－】【＋】.
"AUDIO ": Audio recording On / Off switch, press the【ENTER】to select.
"AUDIO INPUT": LINE IN / MIC, press the【ENTER】to select.
"TIME SLICE": There are 4 types of time period for continued recording, they are 15/30/45 and 60
minutes. Press the【ENTER】key to modify this setting.
"CHANNEL", "QUALITY", "FRAME RATE", "RECORD": Those four keys are for the configuration of
every single channel, press the【ENTER】key to set up.
"OVERWRITTEN": Overwritten on/off switch. Press the【ENTER】key to select.
"ALARM DELAY ": Set alarm delay between 30 seconds ~ 1800 seconds, press digit keys to setup
"GOP": I-frame interval. Press digit keys to set
“BITRATE”: Press digit keys to select. Default 1600kbps, alterable with 【ENTER】or 【－】【＋】
"TIME LIST": 2 time periods can be set for a day; the DVR will automatically make video records according to
the setting. This function is available only with the timed recording mode. Press the【ENTER】key to enter
below setting interface.
SD card: cannot recording/ mirror recording/ recording loss, please press 【ENTER】
1) Cannot recording: The device can only recording against HDD, if the HDD is full, the SD card cannot save
the video record.
2) Mirror recording: main stream recording on HDD, sub-stream recording on SD card at the same time
(There are three situations that may lead video record failure:
RECODA

User Manual for Mobile DVR
15
1. While HDD do not record, the SD card cannot have video record
2. SD card is not available
3. HDD is not available, SD card cannot record)
3) data loss: HDD error or HDD not available, SD card main stream record.
Attention: HDD priority while both HDD and SD card is available.
Four channel, image quality from level 1 to level 5, the highest is level 1, the lowest is level 5, Frame rate PAL:
1-25 frame, NTSC: 1-30 frame., the frame rate can be choose to open or closed while recording.
RECORD TIME LIST
RECORD TIME LIST
DATE TIME 1 TIME 2
EVERYDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SUNDAY
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
SAVE
Note: System will auto start recording within the period in “Timed” setup.
Sub-streaming set：
Cursor move to “Sub-streaming” and press【ENTER】key enter to the following interface，
RECODA

User Manual for Mobile DVR
16
SUB
SUB- -STREAM STREAM SETUP SETUP
RESOLUTION
RESOLUTION： ：CIF/QCIF CIF/QCIF
QUALITY
QUALITY： ：Medium/High/Low Medium/High/Low
SITS RATE: 24/32/48/56/64/80/96/112/128/160/176/200/280
SITS RATE: 24/32/48/56/64/80/96/112/128/160/176/200/280
FRAME RATE: 01/01/01/02/02/03/04/05/07/10/13/15/20
FRAME RATE: 01/01/01/02/02/03/04/05/07/10/13/15/20
SAVE
"Resolution": CIF/ QCIF selectable.
Image quality: Medium/ High/ Low
"Bit Rate": 24/32/48/56/64/80/96/112/128/160/176/200/280 bits. Press 【ENTER】key to enter
Default is 96 bit, press 【ENTER】key to enter
"Frame Rate": 01/01/01/02/02/03/04/05/07/10/13/15/20 frame
Default is 10f, press【ENTER】key to enter.
Click ’SAVE’ to save the configuration.
4.4.3. Power Management
POWER SETUP
POWER SETUP
POWER MODE：TIME /ACC
DELAY POWER OFF：ON/OFF
POWER ON TIME：HH:MM:SS
POWER OFF TIME：HH:MM:SS
DELAY TIME：5（MIN）
SAVE
"Power mode": start up and shut down mode by pressing 【ENTER】key to select.
RECODA

User Manual for Mobile DVR
17
TIME: DVR will auto power on/off according to the preset time table.
ACC: System will auto power on/off according to vehicle acc switch on/off signal.
"DELAY POWER OFF": When this function is on, the DVR will continue making record for a while as per the
configuration. When this function is off, the DVR will shut down when ACC is off. Press ‘enter’ key to select.
“TIME”: off---Shut down system at once. Press 【ENTER】key to select.
"DELAY TIME": Press digit keys to select. The range is between 3 and 240mins. Use key 【Del】to cancel,
number button to enter in.
"POWER ON TIME": Press digit keys to select.
"POWER OFF TIME": Press digit keys to select.
4.4.4. Alarm Settings
ALARM SETUP
ALARM SETUP
INPUT ENABLE RECORDPWL
ON
ON
ON
OFF
I /01
I /02
I /03
I /04
HIGH
HIGH
LOW
LOW
ON
OFF
ON
OFF
RELAY OUTPUT
OUTPUT OFF ENABLE PWL
HIGH
I /05
I /06 OFF
OFF
HIGH
LOW ON
OFF
FUNCTION
LEFT/RIGHT
BRAKE
FRONT
POSTERN
MIDDLE
BACKING
SAVE SPEED G-SENSOR MOVE DETECT
Alarm input
Support 6ch alarm input.
"ENABLE": switch on/off.
ON---Enable alarm input;
OFF---Disable alarm input. Press the 【ENTER】key to select on or off to enable or disable
alarm input.
"Level Setting ": Setup input alarm level signal. HIGH---high electrical level input signal will enable alarm.
Press ‘enter’ to set the level. High or low level can be set with input signal; open or close can be set with output
signal.
"RECORD": ON---Enable alarm recording; OFF---Disable alarm recording. Press the【ENTER】to select on or
off to enable or disable recording.
Alarm output
Support 1ch alarm outputs.
“ENABLE”: On/Off switch.
RECODA

User Manual for Mobile DVR
18
ON---Enable alarm output;
OFF---Disable alarm output. Press the 【ENTER】key to select.
PWL: power level output for alarm. High stands for high power level output and low refers to low power level
output. Select and press “SAVE” to save all setup.
● MOVE SET (Motion Detection)
MOTION DETECTION
OFF/ON
OFF/ON
HIGH/MID/LOW
HIGH/MID/LOWCHI/CH2/CH3/CH4
CHI/CH2/CH3/CH4
AREA
AREA
ENABLE
ENABLE
LEVEL
LEVEL
CHANNEL
CHANNEL
SETUP
SETUP
SAVE
Channel Number：CH1/CH2/CH3/CH4，press【ENTER】key input
Level: HIGH/MID/LOW. Press【ENTER】input
ENABLE: ON/OFF. Press【ENTER】input
ENABLE ON: start alarm record and records alarm journal when alarm
ENABLE OFF: Don’t start alarm record and don’t records alarm journal when alarm
AREA SET: Press【ENTER】key to setup
Remark: After complete setup, please press “SAVE” to save all settings
● OVER SPEED
Move cursor to “over speed” and press【ENTER】key to enter to over speed alarm interface as below:
RECODA

User Manual for Mobile DVR
19
GPS OVER SPEED
GPS OVER SPEED
THRESHOLD：60（0~999）（km/h）
ENABLE
ENABLE： ：ON/OFF ON/OFF
SAVE
THRESHOLD：0~60km/h, input range 0-999. Key 【Del】to cancel.
ENABLE: Press【ENTER】key to set-up
ENABLE ON: To start alarm record and records alarm journal when GPS speed overran threshold
ENABLE OFF: Never to start alarm record and records alarm journal when GPS speed overran threshold
Remark: After complete setup, please press “SAVE” to save all settings
G SENSOR
GSENSOR setup, Press the 【ENTER】key to enter below setting interface for G-sensor configuration:
G
G- -SENSOR SENSOR
THRESHOLD VALUES
X: 2.00 g
Y: 2.00 g
Z: 2.00 g
ALARM SWITCH: ON/OFF
STATUS: X= -0.00 Y= -0.00 Z= -0.00
SAVEADJUST
“LIMIT”: Limit value for X/Y/Z, Minimum value is 0.00g and Maximum value is 9.99g, press digit keys to
RECODA

User Manual for Mobile DVR
20
setup.
“ALARM”: G-Sensor alarm OPEN/CLOSE setup, press 【ENTER】to set it.
Alarm Open: Open alarm recording and alarm files will be recorded when X/Y/Z value over than “Limit
value” under record statues
Alarm Close: Close alarm recording and alarm files will not be recorded when X/Y/Z value over than
“Limit value” under record statues
“CHECK”: Adjust X/Y/Z current values when user start up device at first time, Press the【ENTER】key to
confirm. After “CHECK”, X/Y/Z value will be “0”
Remark: Please do remember to click “SAVE” to save data after setting.
4.4.5. Security Settings
SECURITY
SECURITY
PASSWORD：ON/OFF
USER PWD：******
CONF PWD: ******
INPUT NOT SAME！
ADMIN PWD：******
CONFIRM : ******
SAVE
NOTICE：PASSWORD IS 6 DIGITAL！
Password setting:
"PASSWORD": ON---Enable password; OFF---Disable password, press the【ENTER】key to select.
Select and press “SAVE” to save the configuration. Administrator Password should be same as User’s.
Attention: Multi device have AC recording at the same time, please separate name the device and use different
password. The Device ID can be set in the menu of basic setting.
4.4.6. Network Settings:
Network parameters should be set on the device. The system will detect devices without any further setting if
RECODA