Redback A 1116 User manual

Bluetooth Amplier
with Line Input
Amplier RMS: 25W x 2
Bluetooth V4.1+EDR
Distance 20M
INSTRUCTION MANUAL
A 1116
1. When powering up, the indicator blue light will light.
2. When pairing with unit, search for REDBACK BT in your bluetooth
enabled device.
3. When the unit is successfully paired with your bluetooth device,
there will be an audible conrmation upon a successful connection.
4. When the unit is not paired via bluetooth, the line input will be
available to any connected source.
5. If bluetooth is paired and you pause or stop playing the music from
your bluetooth device, the unit will automatically switch to play the
music from your LINE input source.
Power 2 x 25W @ 8 Ohms
Frequency Response 20Hz ~ 20KHz
Distortion < 10 %
S/N Ratio >85 dB
Operating Temperature −20°C <TA < 55°C
Max Gain > 25dB
IC Efciency > 80%
BT Output > 500 mV
BT Distance > = 20m
Recommended PSU 24V d.c. 2.5A
Audio Input BT VERS 4.1+EDR, 3.5mm Stereo LINE IN
Specications
Instructions
Distributed by Altronic Distributors Pty. Ltd.
Phone: [phone] Fax: [phone]
altronics.com.au
Connection Diagram
• The paired name for Bluetooth
is: REDBACK BT
• Uses ordinary speaker wire to
connects to any pair of monitors
(speakers)

WALL WALL
SHEET IRO N
WALL
SHEET IRO N
WALL
SHEET IRO N
INSTALLATION INSTRUCTIONS
Install on the wall Install on the speaker
STEP 1: Remove paper and adhere to wall STEP 2: Rotate counterclockwise STEP 1: Remove paper
STEP 3: Install screws STEP 4: Rotate clockwise STEP 2: Adhere to the speaker