RedHealth c.Balance User manual

1
RedHealth c.Balance - Circadian Balance
User Guide
Human Pendant with Necklace
Pet Pendant with Heavy Duty Ring
Equine Captured Strap with mounting adapter

2
The RedHealth c.Balance unit is a non-invasive electronic device specifically
developed for personal use. It offers the capacity to enhance general wellbeing,
maintain circadian (body clock) rhythms, counteract the effects of general stress, as well
as the stress and fatigue of electro pollution (EMF), environmental toxins and travel
through it’s automatic background programs. The device is universal for people and
animals.
In addition to the automatic background programs c.Balance has user selectable,
manual boost programs designed for acute needs. These boost programs are designed
to assist and support the body’s innate mechanisms of Calm - calming emotions, Sleep -
enhancing sleep patterns, EASE - easing pain and discomfort and REVIT - revitalizing
energy levels.
The c.Balance can also be ‘personalized’, calibrating the inbuilt wellbeing programs to
relate to the individual person or animal. The device utilizes ultra-low-level pulsed
magnetic fields designed to resonate with the body’s natural acupuncture meridian
system and provide support for the body’s natural self-regulating and adaption
mechanisms.
This User Guide explains the use and operation of the c.Balance device.

3
About the c.Balance Device
The c. Balance unit offers two categories of wellbeing programs:
Manual User programs – selected by the user can and used as and when required. These
provide the potential to calm emotions, aid sleep patterns, ease pain, and revitalize
energy levels.
Automated Background programs – run automatically at preselected times of the day
and night. These are designed to generally aid wellbeing by supporting the body’s innate
mechanisms in maintaining circadian rhythms (24-hour body clock), healthy brain wave
states, counteracting the effects of EMF and environmental toxins pollution, travel, and
stress reduction, They also help activate the body and mind in the morning and prepare it
for sleep in the evening.
These automated background programs run a 7 day alternating cycle with Day 7 being a
day of rest.
In addition, the background programs can be recalibrated and uniquely personalized to
match with the user, adding potency and depth to the therapeutic effects.
All features are accessed via two buttons on the control panel. The right ‘Set’ button gives
direct access to the Manual user programs and starts the ‘Personalize’ feature; the left
‘Status’ button is used to display the battery level and
the current time.
Manual User Programs
When the device is turned on, single consecutive presses
of the right ‘Set’ button will activate each of the manual
user programs in turn. The first press will activate ‘CALM’
as indicated by the flashing red light, a second press will

4
activate ‘SLEEP’, a third press ‘EASE’ and the fourth will activate ‘REVIT’ (revitalize).
A flashing red light against a user program along with the pulsating central yellow light
indicates it is active and will stay active for a preset time of between 14 and 25 minutes
(depending on the program) and then will automatically end.
The programs can be manually stopped at any stage by pressing the ‘Set’ button several
times to advance to ‘REVIT’ and pressed once more for OFF.
Description of Manual User Programs:
Calm: This program is designed to work with both acute and chronic stress and anxiety
and offers the potential for a general calming and relaxing effect, promoting a quieter
and more peaceful mind. The program runs for 15 minutes. It may be repeated as
needed.
Sleep: This program is designed to help establish improved sleep patterns. It is best used a
little before retiring to bed. If waking during the night the Calm program may be more
effective than using the Sleep setting but do experiment. The run time is 25 minutes.
Ease: The aim of this program is to support the soothing of nerve pain, reducing its intensity
and help relax muscular and mental tension. When muscle tensions are reduced the
experience of pain changes. It becomes less dominant or goes completely. The Ease
program also incorporates a ‘rejuvenate’ element designed to aid the natural
rejuvenation of damaged tissues. The program runs for 14 minutes and if required can be
used several times in succession several times a day. Ease can be used in most instances
where pain is experienced and is generally used over the area of discomfort.
Note: that the EASE device is broader in it’s scope and deeper in it’s targeted design to
assist pain and inflammation and aid in tissue repair and recovery.
Revit (Revitalize): This program is designed to aid with the reestablishment of a sense of
vitality when feeling depleted. Run time is 14 minutes.
Note: The action of each of the user program may be enhanced by placing the device
over relevant acupoints as described in the ‘Suggested Use’ Guide.
Setting the Time
Built into the c. Balance unit is a clock that maintains synchronization between the
background programs and the time of day. It is important to set the clock correctly to
ensure the background programs are activated at the optimum time of day.

5
Set time to Midday
For correct setting of the time this method can only be used at Midday/12:00 noon.
Press the left button once and release (show battery level) and then press once more and
hold in while the time is indicated. After a couple of seconds the HR, AM and PM lights will
flash three times to indicate the time has been set to midday. Release the button.
NOTE: If the clock is in stop mode (following a battery discharge below a critical level) the
time will not be shown, only the Time indicator will be on and the HR, AM and PM will
remain off. Setting the time will reactivate the clock.
Set time to any hour:
Step 1 - Press the left button twice to indicate the time and release the button.
Step 2 - While the time is being displayed, press and hold in the right button until the
HR, AM and PM lights all come on together and remain on for a few seconds.
Release the button while the lights are on. Note that once the three lights flash the
time is set to midnight.
Step 3 - While the Time and AM Light are still on, press the right button to increment
the hour by 1 at a time until you get to the current hour in your time zone.
(1am, 2am, 3am ......)
Note that this process might take a few practice rounds to become familiar with
the timing of the sequence of steps. You can’t mess anything up so repeat until you
are comfortable and are able to get the time right.
Display the Time
To display the time, press the left button twice (TIME indictor).
Then either the ‘am’ or ‘pm’ indictor will show and the ‘HR’
indicator will flash once for each hour.
E.g. if ‘PM’ is indicated and the ‘HR’ indicator blinks 4 times, this is
4pm.
If ‘AM’ is indicated and there are no ‘HR’ blinks then it is 12am
(midnight)
If ‘PM’ is indicated and there are no ‘HR’ blinks then it is 12pm
(midday).
NOTE: if the ‘TIME’ is indicated but neither ‘AM’ nor ‘PM’ are, then the clock is not being
set.
Personalizing the Background Programs

6
The Personalize function automatically calibrates the background programs to match
with the users’ current state. During the scan place the unit on the body, over the heart is
a good place.
To initiate the Personalization feature:
Press and hold the right Set button. Release when the LEDs start flashing.
The central yellow light will come on and the indicator lights will flash on and off in a
clockwise direction for about 20 seconds as the personalization process is running. When
the personalization is finished, the lights will go out and the unit will resume to auto
background mode. The personalization will automatically be incorporated into the
background programs.
NOTE: Personalize only works if the time has been set.
The personalization process automatically sets up 3 tiered custom energy programs which
are established based on the body’s preferred sequence of healing.
Week 1 - The first set of programs works on the highest level of energy support determined
in the personalization.
Week 2 - The second set of programs work a bit deeper in the energy system based on
the personalization.
Week 3 – the third set of programs work even deeper as determined by the
personalization.
This 3-week set of personalized energy programs will remain set for 21 days and is then
automatically cleared.
The body changes over time and the unit needs to re-synchronize through the
personalization process on a regular basis with a maximum of 21 days in between.
When the personalize-settings are cleared, the device reverts to default background
program settings.
NOTE: When the unit is put into sleep mode the personalize settings are cleared and the
unit reverts to default program settings. It will need re-personalizing on waking.
Checking the status of the personalization programs
Press the left button once to show the battery level. If the central yellow activation light
remains off then the personalize settings are active. If the central light flashes then the
personalize settings are cleared and the device should be
personalized.
Battery Level
The battery level is indicated by pressing the left ‘Set’ button
once where the yellow battery indicator and several red

7
lights will come on. The number of red lights indicates the battery level:
•4 red lights = fully charged
•3 red lights = good level of charge
•2 red lights = lower level of charge
•1 red light = low charge
•Yellow battery light flashing = discharged
The battery level will show for a couple of seconds and then all the lights will go out.
Charging the Battery
The built in rechargeable battery is charged by inserting a micro USB lead into the socket
in the side of the unit and connecting the other end into a USB charger or USB port on a
computer. To open the USB port dust cover, insert a small screwdriver into the grove as
shown and gently lever it open.
When charging the yellow battery light on the front panel will be illuminated and will stay
illuminated for as long as the charger is attached. To check the battery level during
charging it is best to disconnect the charging lead, wait a few moments and then hold in
the left button on the front panel until the battery light shows. A fully charged battery (four
red lights) will give at least a month’s use of background programs.
The time required to charge the battery will depend on how discharged the battery is. If
the battery level is at two red lights then a full charge will take around 7 hours. If the
battery is fully discharged (flashing battery light) then a soak charge of 20 hours is
recommended.
NOTE: If the battery is left in a depleted state then the unit will go into hibernation mode
and the background programs and user programs will no longer run. When the left button
is pressed, depending on the battery discharge state, either the battery light will flash a
few times or will not light at all. It is necessary to recharge the unit to make it active again.
NOTE: If the unit is going to remain unused for several months then it is recommended to
fully charge the unit, put it into sleep mode and give it a recharge every six months to
preserve the battery. If the battery is left fully discharged then it may start to deteriorate.

8
Putting the unit into Sleep Mode:
The unit can be put into sleep mode when not being used to save battery power and the
effective output from the unit is stopped, however the clock will keep time. To put the unit
into sleep mode press and keep holding in the left button where first the battery level will
be indicated and then after a couple of seconds all the red lights will show and go out
one at a time in a clockwise direction indicating the device is in sleep mode. Let go of
the button.
To wake from sleep mode press in and hold the left button until the red lights start to light
up one at a time in an anticlockwise direction before they all go out. The unit is then in the
normal operating mode.
Important Note: When sleep mode is entered the personalization-settings are cleared so it
will be necessary to re-personalize the unit after waking from sleep mode.
Use
•The unit is sealed against water ingress and will tolerate being wet and submerged
in shallow water for a short length of time, generally up to 30 seconds. However, it is
not designed to be used when swimming or to be subject to high-pressure of water.
It is recommended to keep the unit dry as much as possible.
•The unit is tolerant of shock loads but do not subject it to excessive loads or
constant vibration.
•Its operating temperature range is -5°C to +40°C.
•Clean with a damp cloth only - do not use chemicals.
•Only charge the unit from a standard USB charger outlet.
Disclaimer
All indications for using the RedHealth device are suggestions for trial and personal use only. This
product does not claim to diagnose, treat, cure or prevent disease. If you have a medical concern or
condition, consult an appropriate health care professional. These statements have not been evaluated by
the Food and Drug Administration or any medical or government agency.
Rev 1-1
© 2018 All rights reserved
Rev 1-1