Redx 2505 PU User manual

WARNING
The "230V AC IN" port has a plug which must be inserted into the
"230V AC IN" port when no grid power is supplied to the unit!
RX-2505 PU
Redx 2505 PU Reference
240V guide – – NO GRID
230V AC IN plug
External RCD Extension
Lead for UPS Loads
• External RCD ( Residual Current
Protection ) Extension Lead for the
UPS loads is required for maximum
safety.
Remove one black chassis screw
near the 230V AC IN port.
Place the cord loop around the
screw.
Re-insert screw.
• For more information, please scan
QR code or go to:
www.redxenergy.com.au
• NOTE the "230V AC IN" port has a
plug which must be inserted into the
"230V AC IN" port when no grid
power is supplied to the unit. The
plug must be attached to the frame
of the unit.
• Attach the “230V AC IN” cap to the
chassis:

L N PE From Grid
PP To feed
AC Coupled
Battery
PE
Grid
Main
Switch
RCD for Powerpoint
N
External RCD Extension
Lead for UPS Loads
• NOTE the "230V AC IN" port has a
plug which must be inserted into
the "230V AC IN" port when no grid
power is supplied to the unit. The
plug must be attached to the frame
of the unit.
• Use the supplied power cable
only. If a longer cable is required,
consult with a professional
electrician.
• External RCD (Residual Current
Protection) Extension Lead for the
UPS loads is required for
maximum safety.
• For more information, please scan
QR code or go to:
www.redxenergy.com.au
Power supply cable 10A
MEN Link
RX-2505 PU
Redx 2505 PU Reference
240V guide – – ON GRID