ED9200
ED9200
External display unit
• Can be used in combination with EXOflex,
Corrigo E* or EXOcompact*
• Background illuminated LCD-display, 4 rows with 20
characters a row
• User-friendly keypad
External display unit for controlling EXOflex, Corrigo E
or EXOcompact. The display offers full external control
when the controller is mounted in a panel or similar.
ED9200 can also be used as a portable hand terminal.
• Durable keypad, protection class IP41
When front mounted with sealant kit, IP65
• Built-in beeper (only with EXOflex)
• The unit is compatible with EP9040
Description
ED9200, external display, is an independent display &
configuration unit which can be connected to either
EXOflex, Corrigo E* or EXOcompact* via two different
electrical interfaces. When it is connected to EXOflex,
it is a free-standing PIFA which can be connected to a
processor house via the EFX-channel.
The display can be connected in two ways, either
temporarily in the front panel of the Power PIFA via
a quick cable connection, or permanently via screw
connectors.
ED9200 is delivered with a drill template for easy
installation on a panel front or similar.
Software requirements
* EXOreal 2.8-1-26 or later for EXOflex
* EXOreal 2.8-1-29 or later for EXOcompact and
Corrigo E
* EXOdesigner or EXOapt 2004 with software patches
For full advantage of the four row display in older
systems, a software patch for EXOapt 2004 is required or
EXOdesigner must be used.
Compatibility with EP9040 (LOT)
ED9200 can be connected to an EXOflex configured for
EP9040 (not meeting the software requirements above).
The display will work but only the two upper text rows
will be displayed.
For correct function with EXOcompact and Corrigo E,
the software requirements above must be fulfilled.
Wiring
There are a number of cables for fast connection, see
overleaf. For connection to Corrigo E or EXOcompact, an
EK12 or EK14 cable should be used.
Indication lamps
The indication lamps have the following functions:
Symbol Function Colour
%There is one or more
unacknowledged
alarm(s)
Flashing red
There is one or
more remaining,
acknowledged alarm(s)
Fixed red
!You are in a dialog box
where it is possible to
switch to change mode
Flashing
yellow
Change mode Fixed yellow
P Power supply Green
C Communication with
process station
Green
* Only possible with Corrigo E and EXOcompact
without display.
revision
10 2010
