Rehau PET-G User manual
1. apply soapy water with a soft towel
2. rinse with clean water
3. rub dry with a soft towel
▪The REHAU Face Shield PET-G fulfils the basic
health and safety requirements of the PSA Regula-
tion 2016/425 and EN 166:2001 (the REHAU Face
Shield PET-G oers no protection against mecha-
nical eects e.g. high speed particle).
▪The face shield must be replaced after use. Reuse is
at the option of the user.
▪The face protection can be combined with face
masks, goggles and head covers.
REHAU Face Shield PET-G
Safe and easy to use
Remove protective foil as illustrated. Put Face Shield on the head and fasten with
velcro close tightly.
Slightly loosen the fixing screws, adjust the
angle of the umbrella and pull the fixing
screws tight again.
The REHAU Face Shield PET-G protects against
dripping and splashing liquids and thus reduces the
risk of droplet infection. A complete protection against
viruses, bacteria and other biological agents is, due to
its design, limited. It can be combined with face masks
and goggles. The visor has optical class 1.
Use pure soap suds for cleaning!
Disinfection with standard household disinfectants.
Cleaning instructions
Safety advice 1
1 2 3
Subject to technical changes.
© REHAU AG + Co
Rheniumhaus
Otto-Hahn-Str. 2
95111 Rehau
Germany
IND920 EN 08.2021
REHAU Face Shield PET-G
Marking
Frame: REH 166 3 S CE
REH = manufacturer code
166 = test standard EN 166
3 = resistance to splash of liquids
S = material code for improved strength properties
CE = European Conformity
Vision panel: REH 1 S CE
REH = manufacturer code
1 = optical class
S = material code for improved strength properties
CE = European Conformity
▪If face shields are not used, they should be largely
protected from light and kept dry in smoke-tight
rooms. When storing, make sure that the visors are
not touching the ground to avoid scratches.
▪In case of discolored, strongly scratched visors
or if visors containing stucked particles, the face
shields must be replaced. The visors are available
individually as spare parts. This also applies if the
face shields are otherwise damaged, or if the
fixation screws can no longer be tightened
suiciently to allow safe and secure positioning
of the visor.
Accessories:
The visors are available individually as spare parts.
Mat no.: 13365191001
Expiration date at dry, light protected storage:
If stored properly in a dry place without direct sunlight,
the Face Shield will retain its properties for at least
5 years.
Harmonisation rules:
Regulation 2016/425/EU
Directive 2001/95/EC
EN 166:2001
Risk assessment:
→ see safety instruction 1
▪oers no protection against types of radiation
(e.g. solar radiation, UV radiation, welding, IR)
▪is not fire resistant
▪a damaged face shield can aect visibility and
protection
▪Materials that come into contact with the skin can
cause an allergic reaction in sensitive persons.
The notified body DIN CERTCO Gesellschaft für
Konformitätsbewertung mbH, Alboinstr. 56, D-12103
Berlin, notified body no. 0196 has issued the type
examination certificate C6793REH/R0.
The EU Declaration of Conformity can be found at:
www.rehau.com/faceshield
