REJUVASUN 34 User manual

4930660-02
user manual

2 - Rejuvasun 34 with Omnilux Assembly and User Manual
4930660-02
LIMITED WARRANTY
JK Products & Services (JK) warrants your tanning unit
to be free of structural defects in material and workman-
ship, under normal use, for its lifetime. JK will, at its
discretion, repair any structural defect which materially
affects the performance of the tanning unit, or replace the
tanning unit.
For twelve (12) months following the purchase date of your
tanning unit, JK will provide replacements for parts that
prove to be defective in material or workmanship, with
the following exceptions: uorescent lamps are warranted
against manufacturer’s defects for a period of thirty (30)
days; acrylics are warranted against manufacturer’s defects
for a period of one (1) year (prorated) following the pur-
chase date of your tanning unit. Standard ground shipping
charges will be covered for the entire twelve (12) months
of this warranty period. Any upgraded shipping method
charges will be paid for by the customer.
Labor costs associated with repair or replacement work
covered by this warranty will be reimbursed for repair or
replacement work required to be performed for a period
of ninety (90) days following the purchase date of your
tanning unit. Normal wear and tear, damage from misuse
or abuse, damage incurred in transit or damages resulting
from unauthorized repairs or modications are not cov-
ered by this warranty. Warranty coverage does not include
cosmetic abnormalities such as scratches, nicks, dents, or
other cosmetic changes that do not materially interfere
with the function of the tanning unit.
THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF
ANY OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, WHICH ARE HEREBY DISCLAIMED. No
one has the authority to change or modify this One Year
Warranty in any respect. Proof of purchase, including se-
rial number, is required for any warranty coverage.
IN NO EVENT SHALL YOUR DISTRIBUTOR OR
THE MANUFACTURER BE LIABLE AT LAW OR IN
EQUITY FOR ANY LOSS, LIABILITY, DAMAGE OR
EXPENSE IN AN AMOUNT IN EXCESS OF THE PUR-
CHASE PRICE RECEIVED, OR FOR LOSS OF USE
OR PROFITS, LOSS OF TIME, INCONVENIENCE,
RENTAL OR SUBSTITUTE PRODUCTS, LOSS OF
BUSINESS, LOSS OF INCOME, OR ANY OTHER IN-
CIDENTAL, INDIRECT, SPECIAL OR CONSEQUEN-
TIAL DAMAGES. Some states do not allow the exclu-
sion or limitation of incidental or consequential damages,
and the above limitation or exclusion will not apply to
residents of some states. This One Year Warranty gives
you specic, legal rights and you may have other rights
which may vary from state to state.
JK Products & Services, Inc. makes no guarantees on
income, return on investment, market conditions, perfor-
mance, etc. with any undertaking using its products and ser-
vices. Past performance is not indicative of future results.
All warranty service must be performed by an authorized
service person using only JK authorized replacement parts.
Use of non-authorized parts may void your warranty. All
labor charges must be authorized by JK prior to the start of
repairs and must not exceed the established rates and time
allotment policies established by JK. Contact JK Products
& Services for the authorized Service Center nearest you.
This warranty is serial number specic and only applies
to tanning units purchased through an authorized JK Dis-
tributor. This warranty is extended to the individual or legal
entity whose name appears on the original sales document
and may not be transferred to any other individual or legal
entity. This warranty is void if the tanning unit is modied
in any manner from its original design.
To obtain warranty service, contact your place of pur-
chase. Proof of purchase, including serial number, is re-
quired for verication.

Rejuvasun 34 with Omnilux Assembly and User Manual - 3
4930660-02
Thank you for purchasing this tanning bed.
It has been designed to provide years of de-
pendable service for you.
Please read all the instructions in this booklet
before installing and using the unit. Always
be sure to observe all safety precautions.
Contents
Unpacking and inspection ....................... 6
Pre-installation Planning .......................... 6
Electrical Requirements ........................... 6
Disassembly ............................................ 7
Assembly ............................................... 20
Electrical Connections ........................... 32
Audio .................................................... 33
Mood Mode™ Lighting .......................... 33
Remote Connections ............................. 34
T-Max® Products ................................... 34
T-Max® Wireless Remote System .......... 34
Remote System Hook-up Scenarios ....... 34
Operation .............................................. 38
Before You Tan ....................................... 38
Exposure Times ...................................... 38
The Keypad ........................................... 39
The Tanning Session ............................... 40
Care and Maintenance .......................... 41
Cleaning After Use ................................ 41
Thorough Periodic Cleaning .................. 41
Cleaning the Canopy and Bench ........... 41
Mechanical Inspection .......................... 41
Opening / Replacing Acrylics ................ 42
Removing/Replacing Fluorescent Lamps 42
Replacement Lamps .............................. 42
Removing/Replacing Face Tanner Lamp . 43
Troubleshooting...................................... 44
Updating Timer Software ........................ 46
Parameters ............................................. 46

4 - Rejuvasun 34 with Omnilux Assembly and User Manual
4930660-02
DANGERUltraviolet radiation. Follow instructions. Avoid overexposure. As with natural sunlight, overexposure can cause eye and skin injury and al-
lergic reactions.Repeated exposure may cause premature aging of the skin and skin cancer.WEAR
PROTECTIVE EYEWEAR; FAILURE TO MAY RESULT IN SEVERE BURNS OR LONGTERM IN-
JURY TOTHE EYES.Medications or cosmetics may increase your sensitivity to the ultraviolet radiation.
Consult physician before using sunlamp if you are using medications or have a history of skin problems
or believe yourself especially sensitive to sunlight. If you do not tan in the sun, you are unlikely to tan from
the use of this product. Children, the elderly, or fair skinned people who always burn easily and either never tan or tan
minimally should not use this equipment.
To use, lie down under canopy and pull down as far as adjustment will allow. Do not use without clear plastic panels in
place. Untanned persons should not tan on consecutive days during their rst week of tanning. Never tan more than once
a day. Tanning normally appears after the rst few sessions and maximizes after approximately four weeks. Tan once or
twice per week thereafter to maintain appearance. Persons already having a base tan may begin at advanced levels cor-
responding to the extent of their base tan.
New lamps emit approximately 10% more ultraviolet radiation during the rst 50 hours of operation. Recommended tan-
ning times should therefore be reduced by approximately 10% during that period.
WARNING: • Read the instructions booklet before using this sunlamp product. • All persons in the room should wear
protective eyewear when lamps are on. Recommended eyewear: provided eyeshields or equivalent eyewear as dened
under 21 CFR 1040.20. Other types of eyewear may not provide adequate protection. Failure to use protective eyewear
may result in severe burns or other eye injury. If discomfort develops, discontinue use and consult a physician.
THE FOLLOWING LAMPS HAVE BEEN CERTIFIED FOR USE IN THIS EQUIPMENT:
ETS ELITE Select Model F71-T12-100W BP
Heraeus OH C 400 EF (facial unit)
THIS EQUIPMENT MUST BE EARTH GROUNDED.
This product is in conformity with performance standards for sun lamp products under 21 CFR PART 1040.20
and ANSI/UL Standard 482. Certied to CAN/CSA Standard C22.2 NO. 224.
Disconnect power before attempting to clean, relamp, or engage in the maintenance of this product
RECOMMENDED EXPOSURE TIMES IN MINUTES MAXIMUM EXPOSURE TIME IS 20 MINUTES
Level 1/Week 1 Level 2 Level 3 Level 4 Level 5
Skin Type: 1st-3rd Sessions
I Sensitive Skin (Burns easily and severely and does not tan.) NOT RECOMMENDED FOR TANNING
II Light (Burns easily and severely and tans minimally.) 4 8 12 16 20
III Normal (Burns moderately and tans average.) 6 10 15 20 20
IV Dark (Burns minimally, tans easily and above average.) 8 12 16 20 20

Rejuvasun 34 with Omnilux Assembly and User Manual - 5
4930660-02
DANGERRayonnement ultraviolet. Veuillez suivre les instructions. Évitez une exposition excessive. Tout comme pour les rayons du soleil, une exposition excessive peut causer des blessures
aux yeux et à la peau et provoquer des réactions allergiques. Une exposition répétée peut causer le vieillissement pré-
maturé de la peau et provoquer le cancer de la peau.PORTEZ DES LUNETTES PROTECTRICES: LE NON-RESPECT
DE CETTE CONSIGNE DE SÉCURITÉ PEUT ENTRAÎNER DE GRAVES BRÛLURES OU DES LÉSIONS OCULAIRES
À LONG TERME. Les médicaments ou les produits cosmétiques peuvent augmenter votre sensibilité au rayonnement
ultraviolet. Consultez un médecin avant d’utiliser la lampe solaire si vous prenez des médicaments, si vous souffrez d’une
maladie cutanée ou si vous croyez être particulièrement sensible aux rayons du soleil. Si vous ne bronzez pas au soleil, il
est peu probable que vous bronzerez sous une lampe solaire. Les enfants, les personnes âgées et les personnes qui ont
une peau claire qui brûle facilement, ne bronze jamais ou alors très peu, ne devraient pas utiliser cette lampe.
Étendez-vous sous la partie supérieure, puis abaissez celle-ci aussi bas que possible. N’utilisez pas la lampe sans les pan-
neaux de plastique transparents. La première semaine de bronzage, les personnes qui n’ont pas un hâle initial ne doivent
pas se faire bronzer tous les jours. Ne vous faites jamais bronzer plus d’une fois par jour. Le bronzage commence normale-
ment à apparaître après les premières séances : il atteint son apogée au bout d’environ quatre semaines. Les personnes
qui ont déjà un teint hâlé peuvent commencer à des niveaux plus élevés, selon l’importance de leur hâle initial.
Les lampes neuves émettent approximativement 10 % de plus de rayons ultraviolets au cours des 50 premières heures
de fonctionnement. Le temps de bronzage doit donc êatre réduit d’environ 10 % pendant cette période.
AVERTISSEMENT : • Lisez le livret d’instructions avant d’utiliser cette lampe solaire. • Les autres personnes présentes
dans la pièce doivent aussi porter des lunettes protectrices lorsque les lampes sont allumées. Coquilles de protection
pour les yeux recommandées: Les coquilles de protection fournies ou l’équivalent, tel que le stipule le document 21 CFR
1040.20.Les autres types de lunettes protectrices peuvent ne pas assurer une protection adéquate. Utilisé sans lunettes
protectrices, ce produit peut causer des brûlures ou lésions oculaires graves. Si vous souffrez d’un malaise, arrêtez
l’utilisation et consultez un médecin.
SEULES LES LAMPES SUIVANTES ONT ÉTÉ HOMOLOGUÉES POUR CET ÉQUIPEMENT :
ETS ELITE Select Model F71-T12-100W BP
Heraeus OH C 400 EF (unité faciale)
Cet équipement doit être mis à la terre.
Ce produit est conforme aux normes de rendement pour les lampes solaires dans le documents
21 CFR, partie 1040.20 , ANSI/UL 482 , CAN/CSA C22.2 N° 224.
Débrancher l’alimentation électrique avant de nettoyer l’appareil , d’en faire
l’entretien ou de changer les lampes
TEMPS D’EXPOSITION RECOMMANDÉ EN MINUTES LE TEMPS D’EXPOSITION MAXIMAL EST DE 20 MINUTES
Élevé 1/Semaine 1 Élevé 2 Élevé 3 Élevé 4 Élevé 5
Type de peau: 1ere-3e
I Peau sensible (brûle facilement et ne bronze pas) NON RECOMMANDÉ
II Peau claire (brûle facilement et bronze très peu) 4 8 12 16 20
III Peau normale (brûle et bronze de façon modérée) 6 10 15 20 20
IV Peau foncée (brûle très peu, bronze plus facilement que la moyenne) 8 12 16 20 20

6 - Rejuvasun 34 with Omnilux Assembly and User Manual
4930660-02
Unpacking and inspection
Your new tanning bed arrives completely
assembled. The reason for this is to assure
everything has been tested at the factory. Be-
fore performing any work, inspect the unit
carefully and identify any issues that may
have happened during shipping. Notify the
transportation company immediately to re-
port any shipping damage.
Record the serial number of the unit in the
area provided at the back of this manual.
This information will be required whenever
you call customer service.
Proper assembly of your sunbed
requires 3-4 people. Plan to have
some helpers assist you.
CAUTION
DO NOT lift the unit using the plastic
endcaps. They are not designed to
hold the weight of the unit and may
break, causing damage to the unit and
possible injury.
CAUTION
Air from the room is used to cool the
sunbed. Maximum ambient room tem-
perature should be 80°F. Place your
sunbed no closer than 6” from any
wall. Make sure nothing obstructs the
airow into or out of the fan openings.
A poorly ventilated room may cause
the unit to become hot and cause dis-
comfort to the user.
CAUTION
Pre-installation Planning
The following instructions outline a com-
plete disassembly and reassembly. Prepare
an area for disassembly to place items prior
to installation in the nal space.
No hardware has been provided as the hard-
ware needed will be removed during the
disassembly process. Be sure to keep track
of all hardware removed.
Electrical Requirements
You are responsible for preparing the facility
for your tanning bed. Please have an electri-
cian present at the time your tanning bed is
installed. That way the installation crew can
fully verify all functions before they leave.
This unit runs on 220VAC service and must
be hardwired directly to a junction box on a
dedicated circuit. A professional electrician
is recommended for electrical installation.
This unit requires a minimum 20A cir-
cuit breaker on a 3-phase line (3 wire plus
ground). Alternatively, it requires a minimum
30A circuit breaker on a single phase line (2
wire plus ground). See page 32.
Use of a voltage source above 245V
AC may prevent proper operation
of the sunbed and could cause
damage and void the warranty.
CAUTION

Rejuvasun 34 with Omnilux Assembly and User Manual - 7
4930660-02
Disassembly
Your new tanning bed arrives completely
assembled to assure everything has been
tested at the factory. Therefore you must rst
disassemble the bed before moving it into
the salon room.
If, during the disassembly process, you nd
you can move the unit without further disas-
sembly, feel free to do so and begin the as-
sembly process at a suitable step.
Remember to save all hardware removed. It
will all be used during reassembly.
First, remove the shipping pins locking the
canopy down and raise the canopy. Press-
ing the canopy down slightly will loosen the
pins so they can be removed easily.
Shipping Pin

8 - Rejuvasun 34 with Omnilux Assembly and User Manual
4930660-02
Remove the bench and canopy acrylics.
The bench acrylic is secured by (2) 1/4-
20x1” Phillips screws at the front corners.
Remove the screws and simply raise the
acrylic slightly and pull free of the alumi-
num channel at the back.
Five captive screws across the front of the
canopy hold the canopy acrylic in place.
Loosen these screws and the front channel
will swing down. The screws will remain in
the channel. Swing the channel down farther
to release the acrylic and lower the acrylic
to clear the handle.
Attached to the canopy acrylic are 2 exciters
(speakers). Disconnect the white connector
on the wiring harness running from these
exciters into the bed.
Now lift the acrylic out of the back alumi-
num channel.

Rejuvasun 34 with Omnilux Assembly and User Manual - 9
4930660-02
On top of the skirt are 4 Phillips at head
screws. Remove these screws.
Now tip the skirt forward and lift off the pegs
at the bottom.
As the skirt is removed you will nd a cable
attached. This powers the Mood Mode ac-
cent lighting. Disconnect this cable and set
the skirt aside.

10 - Rejuvasun 34 with Omnilux Assembly and User Manual
4930660-02
Find the harnesses under the bench and dis-
connect them all. Don’t worry about mixing
them up. They are all keyed to only connect
to their proper mate.
Most harnesses connect with locking re-
ceptacles, like the one shown below. Sim-
ply squeeze the “wings” on either side and
pull the connectors apart. Do not pull on the
wires.
A few of the connectors have a wire tie
around them. This wire tie is removable and
does not need to be cut.
Note: You may nd it helpful to label the
cables for ease and speed of reassembly. A
simple number on the connector with a felt
tip pen works great.

Rejuvasun 34 with Omnilux Assembly and User Manual - 11
4930660-02
The body fan is held in place with (2) #10-
24x1/2” screws at the bottom. Remove
these screws, then lift the body fan assembly
straight up and off the bed. Be careful of the
power cable.

12 - Rejuvasun 34 with Omnilux Assembly and User Manual
4930660-02
The bench endcaps are held in place by (4)
#10-24x1” screws each.
The acrylic end supports are held in place
by (5) #10-24x1” at head screws each.
Remove both pieces from each end and set
aside.

Rejuvasun 34 with Omnilux Assembly and User Manual - 13
4930660-02
The front cross member is held in place with
(4) 5/16-18x1” hex socket bolts.

14 - Rejuvasun 34 with Omnilux Assembly and User Manual
4930660-02
PLENUM
Next, remove the (6) #10x1/2” Phillips sheet
metal screws holding the fan plenum to the
back panel. This plenum routes air from the
cooling fans through the lamp box.
Slowly lift the lamp box out of the bench,
being careful not to damage the plenum.
Three #10x1/2” screws hold the oor pro-
tector panel. Remove it and set aside.
FLOOR PROTECTOR
PANEL

Rejuvasun 34 with Omnilux Assembly and User Manual - 15
4930660-02
Lift springs under extreme tension.
Failure to properly install the shipping
pins could result in damage to the unit
and/or personal injury when removing
the canopy.
WARNING
Close the canopy and reinstall the shipping
pins to hold the lift system in place.
Remove the canopy cover and rear corner
covers.
The back of the canopy cover includes the
metal panel. Loosen the (8) 1/4-20 Phillips
screws securing the back covers just a few
turns. Do not remove these screws. The front
corners of the canopy cover are held by (1)
#10-32x1” at head screw in each corner.
Remove these screws. Carefully lift the cov-
er from the bed.
The rear corner covers are attached with (6)
#10x1/2” screws each. Simply loosen these
screws and the covers will slip off.

16 - Rejuvasun 34 with Omnilux Assembly and User Manual
4930660-02
The canopy endcaps are attached with (4)
#10-24x1” Phillips screws each. Remove
both endcaps.

Rejuvasun 34 with Omnilux Assembly and User Manual - 17
4930660-02
BELLOWS
On the back of the canopy, toward the foot
end, is a rubber bellows protecting the wir-
ing from the bench to the canopy. Discon-
nect one end of the bellows by loosening
the clamp holding it in place.
Pull the cables from the canopy out of the
bench. You may nd it helpful to tape or tie
the cables up so they do not get in the way
when moving the canopy.
Make sure the shipping pins are in the ped-
estals. Remove the (5) 3/8-20x1” hex bolts
on each end of the canopy that attach it
to the lift system. Make sure something or
someone is holding the front of the canopy
so it does not fall.
Remove the canopy.

18 - Rejuvasun 34 with Omnilux Assembly and User Manual
4930660-02
Remove the (16) #10x1/2” sheet metal
screws holding the rear angle panel and set
the panel aside.
The rear cross member sits in cradles on
each end and is secured in place with (8)
#10x1/2” sheet metal screws. Remove the
screws and slip the cross member out of the
cradles.
REAR ANGLE PANEL
REAR CROSS MEMBER

Rejuvasun 34 with Omnilux Assembly and User Manual - 19
4930660-02
The back panel attaches to the pedestals with
(8) #10x1/2” screws. Remove the screws and
lift the panel from the pedestals.
BACK PANEL
SCREWS

20 - Rejuvasun 34 with Omnilux Assembly and User Manual
4930660-02
Assembly
Place the pedestals in the salon room ap-
proximately where the bed will be.