Remington Titanium All-in-one PG6020AU User manual

2 YEAR WARRANTY PG6020AU
TITANIUM
ALL-IN-ONE
RECHARGEABLE GROOMING SYSTEM
USE & CARE
MANUAL
PLEASE READ
PRIOR TO USE
Professional
®

2
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic precautions
should always be observed, including the following.
READ ALL INSTRUCTIONS BEFORE USING
For additional protection, the installation of a residual
current device (rcd) having a rated residual operating
current not exceeding 30 mA is advisable in the
electrical circuit supplying the bathroom. Ask your
installer for advice.
KEEP AWAY FROM WATER
WARNING - TO REDUCE THE RISK OF BURNS,
ELECTROCUTION AND FIRE OR INJURY TO PERSONS
DANGER - As with most electrical appliances, electrical
parts are electrically live even when the switch is off.
• Do not place or store the groomer or charging adaptor where
it can fall or be knocked into a sink or bath.
• Do not place in or drop into water or any other liquid.
• If an appliance falls into water, "unplug it” immediately.
Do not reach into the water.
• Unplug the charging adaptor from the electrical outlet
immediately after use.
• Do not use while bathing or in the shower.
• Unplug and switch off this appliance before cleaning it.
• Use this groomer only for its intended use as described
in this manual.
• Do not use attachments not recommended by Remington.
• Never drop or insert any object into any opening of this
groomer.
• Keep the cord away from heated surfaces.

3
•Do not use this groomer with a damaged or broken trimming
unit as injury may occur.
•Always store the charging adaptor in a moisture-free location.
•This groomer is manufactured for home use only.
•This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
•Do not use on people who are asleep.
•Never operate this appliance if it has a damaged cord or plug,
if it is not working correctly, if the charging adaptor has been
damaged or dropped into water.
•Do not use an extension cord or a voltage converter with this
appliance.
•Do not wrap the cord around the appliance.
Remington strongly recommends that an approved
Safety Switch (Residual current device) be installed
to protect all bathroom power outlets. Ask an electrical
contractor for advice.
SAVE THESE INSTRUCTIONS

PG6020AU TITANIUM ALL-IN-ONE RECHARGEABLE
GROOMING SYSTEM
USE AND CARE MANUAL
Thank you for purchasing your Remington® Titanium All-in-one
Rechargeable Grooming System. Inside this manual you will find
instructions on using and caring for your groomer.
KEY PARTS
1. Full Size Trimmer Attachment
2. Hair Clipper Comb Attachment
3. On/Off Switch
4. Groomer Handle
5. Nose, Ear, Eyebrow Trimmer
Attachment
6. Stubble & Beard Comb
Attachment
7. LED Charging Indicator Light
8. Arc Detail Trimmer Attachment
9. Foil Shaver Attachment
10. Storage Stand
Also Included:
Charging Adaptor
10
5
6
6
78
9
1
2
3
4
4

ABOUT YOUR GROOMER
PG6020AU SPECIFICATIONS
Power System Cordless
Initial Charge Time 14-16 Hours
Full Charge Time 14-16 Hours
Runtime 30 Minutes
Indicators LED
Voltage Type Single
BEFORE USING YOUR GROOMER
Charging
• Before using your groomer for the first time, charge it for 14 to 16 hours.
• Place your groomer into the charging stand and then plug the charging
adaptor unit into a 220-240 volt domestic power outlet. Check to ensure
that the groomer On/Off switch is OFF. The Charging Indicator Light will
glow to indicate that it is charging.
• The batteries cannot be overcharged, but it is recommend that charging
be discontinued and the groomer stored away if it will not be used for an
extended period of time (2-3 months).
• The groomer will be fully charged in 14 to 16 hours.
• To preserve the life of the batteries, discharge them by running the
groomer until the blades move slowly. Switch off and recharge for 14 to
16 hours. Do this every 6 months.
• Use the groomer only with the charging adaptor supplied.
ATTACHING THE GROOMING ATTACHMENTS
What Attachments to Use
Detail Arc
Trimmer
Full Size
Trimmer
Nose & Ear
Trimmer
Adjustable
Combs
Foil
Shaver
Beard x x
Beard line x x x
Ear x
Eyebrow x x
Moustache x x x
Nape of neck x x
Nose x
Sideburns x x x x
5

NOTE: The adjustable Comb Attachments have various length settings. When first
becoming familiar with the groomer, begin with a higher numbered setting. Adjust
cutting length as desired.
• The trimmer attachments are removed by rotating anticlockwise and lifting off.
• Insert the required attachment and rotate clockwise to lock into position.
HOW TO USE YOUR GROOMER
Here are a few tips for trimming facial and body hair (guide only).
Tips for best results
• Beard, moustache and sideburn hairs should be dry.
• Avoid using lotions before using your groomer. Comb your hair in the
direction that it grows.
• Remove trimmer comb attachment if you are: defining hairline edges such
as sideburns, trimming the nape of your neck, trimming your beard line on
front of neck.
Attaching and Removing the Comb Guides
NOTE: The comb attachments have a common base and both fit on the
full size trimmer.
The Beard & Stubble Comb Attachment has 8 Length settings: 1-8mm
(in increments of 1mm)
The Hair Clipper Comb Attachment has 8 Length settings: 9-16mm
(in increments of 1mm)
• To remove the comb from the base, slide the comb up and off the base.
• To insert a comb onto the common base, ensure the comb is aligned in
the base and slide it on by pushing it down.
• To attach the comb attachment to the full size trimmer head: with the
trimmer blade facing away from you, align the comb on top of the trimmer
head and click into place.
• To remove: with the trimmer blade facing away from you, carefully push
the guide comb away from the trimmer blade.
Trimming Stubble & Beards
• Before you begin, comb your hair in the direction that it grows so that the
hairs are at their maximum height and facing in the same direction.
• Place the correct hair length comb attachment on the full size trimmer head
and determine how much hair you wish to trim. Remember, until you are
6

7
familiar with using the groomer, it is better to select a longer hair length
setting in order not to trim too much hair.
• Turn the groomer’s power switch ON and begin trimming.
• Start trimming under your chin, and following your jawbone line. Work
toward your ear and upper beard line using an upward motion. Allow
the hair length attachment to follow the contour of your face.
• When finished trimming, turn the power to OFF.
To Define the Beard Line
• Hold the groomer with the full size trimmer blade facing you.
• Start with the edge of the beard line and with the cutting blades resting
lightly against your skin. Use downward motions towards the edge of the
beard line to trim the beard line to the desired shape in the facial areas
and around the neck.
To Trim the Edges of a Moustache
• Moustache hairs should be dry.
• Use a small comb to comb the hairs straight for trimming. Hold the
groomer with either the arc detail trimmer or full size trimmer blade
facing you.
• Trim hairs using a downward motion following the direction of your
hair growth or trim against your hair growth, whichever is preferred.
NOTE: Since all hairs do not grow in the same direction, you may want
to try different trimming methods (i.e. upwards, downwards or across).
Practice is best for optimum results.
• After achieving the desired length, use a downward motion to blend
moustache hairs.
• When finished trimming, turn the power to OFF.
NOTE: Use slow light pressure. Too much pressure may trim off more
hair than desired.
To Trim Sideburns
• Comb sideburns following the direction of your hair growth.
• Hold the groomer vertically with either the arc detail trimmer or full size
trimmer blade facing you.
• Trim sideburns using a downward motion. After trimming, lightly go over
the trimmed areas with the foil shaver attachment to remove any short
hairs remaining and to get a smooth clean finish.
• When finished trimming, turn the power to OFF.

To Trim Nose Hair
To remove hair from the nose:
• Nose & ear attachment should be on the groomer.
• Turn the groomer on.
• Insert the groomer's cutting unit gently into the opening of the nostril.
• Rotate the groomer in a circular motion around the opening of the nostril.
• For best cutting efficiency, gently move the groomer in and out of the
nostril as you rotate it.
• Avoid inserting the groomer more than 5 – 6mm into your nostril to
ensure safe trimming.
To Remove Hair from the Ear:
• Nose & ear attachment should be on the groomer.
• Turn the groomer on.
• Insert the groomer’s cutting unit gently into the outer ear canal opening.
• Avoid inserting the groomer more than 5 – 6mm into your ear canal to
ensure safe trimming.
• Gently rotate the groomer in a circular motion.
• To trim hairs protruding from the outer surface of the ear, guide the
groomer around the edge of the ear.
To Shave Using the Foil Shaver Attachment
• Hold the groomer so the foil shaver gently touches your face.
• Use short and well-controlled movements to shave around your beard
or moustache.
NOTE: The foil shaver is designed to shave the detailed areas around
your beard, moustache and sideburns. It is not designed to shave your
entire face.
Trimming the Nape of Your Neck
NOTE: You will need a hand mirror for this operation if performing it alone.
• Before you begin, attach the 30mm Trimmer Blade.
• Use your fingers to lift the hair at the base of your head up off the neck.
Your index finger should be covering the roots of the hairs you are lifting
to prevent accidental removal by the personal groomer.
• Using your other hand, hold the personal groomer to the base of your
neck with the cutting unit facing up, and move the personal groomer
up the length of the neck until it touches your finger covering the hair
roots at the base of your head.
8

9
• Be sure to move the unit slowly when performing this operation and
to keep the hair roots at the base of your head out of the way of the
trimmer.
CLEANING ATTACHMENTS WITH WATER
Always clean the grooming system attachments regularly to ensure
maximum performance and a proper operating life.
Cleaning attachments with water
NOTE: The full size trimmer attachment is permanently lubricated, so
can be cleaned with the brush provided. If you do rinse this attachment
with cool or warm water (never use hot water) then it will need to be
re-lubricated using the light-grade oil supplied or sewing machine oil.
• Remove attachment.
• Rinse ONLY the attachment under warm running water. Do NOT use
hot water as this might cause damage.
NOTE: Blades must be lubricated again with oil if rinsed under water.
Cleaning attachments with the cleaning brush
• After removing attachment, thoroughly brush and blowout hair clippings
from cutting system, attachment, and top of groomer handle. (Do NOT
use the cleaning brush on the Foil compartment of the Foil shaver
attachment).
Cleaning the foil shaver attachment
• Remove attachment.
• Remove foil head by pressing the button on the front of the foil shaver
attachment.
• Gently tap the foil head to remove excess clippings (never use a brush
on the foil).
• Brush hair clippings from the cutter.
• Replace foil head onto the shaver attachment by gently snapping
into place.
Oiling blades & cautions
• Rinsing attachments under water (above) requires re-lubricating the
cutting blades once a month.
Using only light-grade oils (sewing machine oil can also be used),
simply spread 1-2 drops lightly over cutters with fingertip. Wipe away
all excess oil.

• Use only light-grade oils as these will not evaporate or slow down speed
of cutting blades.
• Do not use hair oil, grease, or any oil mixed with kerosene nor solvent
as these too will evaporate.
This product is not suitable to use in a bath or shower.
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
10