Reolink Argus 2 User manual

Reolink Argus 2/Argus Pro
Operational Instruction
EN/DE/FR/IT/ES
Aug 2021
QSG6_A
58.03.001.0128 https://reolink.com https://support.reolink.com
Technical Support
please visit our ocial support site and contact our support team before returning the
products: https://support.reolink.com.
Technische Unterstützung
Wenn Sie Hilfe brauchen, kontaktieren Sie bitte Reolink Support Team zuerst, bevor Sie Ihre
Bestellung zurücksenden. Meiste Fragen oder Probleme können von unserem Online Support
Center beantwortet und gelöst werden: https://support.reolink.com.
Support technique
Si vous avez besoin d’aide, veuillez contacter Reolink avant de retourner votre produit. La
plupart des questions peuvent être répondues via notre centre de support en ligne à l'adresse
https://support.reolink.com.
Supporto Tecnica
Se avete bisogno di aiuto, le chiediamo gentilmente di contattare Reolink prima di restituire il
prodotto. La maggior parte delle domande può essere risolta tramite il nostro centro di
assistenza online all'indirizzo https://support.reolink.com.
Soporte técnico
Si necesita ayuda, comuníquese con Reolink antes de devolver su producto. La mayoría de las
preguntas se pueden responder a través de nuestro centro de soporte en línea en
https://support.reolink.com.
REOLINK INNOVATION LIMITED
FLAT/RM 705 7/F FA YUEN COMMERCIAL BUILDING 75-77 FA YUEN STREET MONG KOK KL
HONG KONG
Hoferstasse 9B, 71636 Ludwigsburg, Germany
[email protected]
Product Ident GmbH
89 Princess Street, Manchester, M1 4HT, UK
[email protected]
APEX CE SPECIALISTS LIMITED
REP
EU
REP
UK

Contents What’s in the Box
* The camera and the rechargeable battery are packed separately in the same package.
* Please use the skin for better weatherproof performance when you install the camera outdoors.
What’s in the Box
Camera Introduction
Install Rechargeable Battery
Set up the Camera
Charge the Battery
Installation Guides
Notes on PIR Motion Sensor
Notes on Rechargeable Battery Usage
Troubleshooting
Specifications
Notification of Compliance
2
3
4
5
6
7
11
13
14
15
16
EN
NOTE: Camera and accessories vary with dierent camera models that you purchase.
2English
1 English
Outdoor Security
Mount
x1
Surveillance
Sign x1
Mounting Hole
Template x1
(x2 for Argus 2)
Screws
(in pack) x1
(x2 for Argus 2)
Quick Start Guide
x1
Skin x1
*
Camera
x1
Wall Mount
(Only for Argus 2)
x1
Rechargeable
Battery
x1
*
Power Cable
x1

Install Rechargeable Battery
To remove the battery from the camera,
please pull the button on the top of the
battery and slide it upwards.
Slide the battery downward and lock it firmly.
4English
3 English
Camera Introduction
Red Light: WiFi connection failed
Dierent states of the status LED:
Blue Light: WiFi connection succeeded
Blinking: Standby status
On: Working status
Micro SD Card Slot
Daylight Sensor
Lens
Status LED
Built-in Mic
Built-in PIR Motion Sensor
Speaker
Wall Mount
Reset Hole
* Press the reset button with a
pin to restore factory settings.
* SD card is not included.
* Only for Argus 2
Check the button status to see if
the battery is installed correctly.

Install Rechargeable Battery
To remove the battery from the camera,
please pull the button on the top of the
battery and slide it upwards.
Slide the battery downward and lock it firmly.
4English
3 English
Camera Introduction
Red Light: WiFi connection failed
Dierent states of the status LED:
Blue Light: WiFi connection succeeded
Blinking: Standby status
On: Working status
Micro SD Card Slot
Daylight Sensor
Lens
Status LED
Built-in Mic
Built-in PIR Motion Sensor
Speaker
Wall Mount
Reset Hole
* Press the reset button with a
pin to restore factory settings.
* SD card is not included.
* Only for Argus 2
Check the button status to see if
the battery is installed correctly.

• On Smartphone
Download and launch the Reolink App or Client software, and follow the onscreen instructions to
finish initial setup.
Scan to download the Reolink App.
Set up the Camera Charge the Battery
NOTE: The solar panel is NOT included in the package, you can buy it on Reolink ocial
online stores.
Charge the battery with a power adapter
(not included)
* Battery can also be charged separately.
Charge the battery with Reolink
Solar Panel (Not included if you
only purchase the camera).
Charging indicator:
Orange LED: Charging Green LED: Fully charged
6English5 English
For the weatherproof performance, always
cover the USB charging port with the rubber
plug after finishing charging the battery.
• On PC
Download path of the Reolink Client: go to https://reolink.com > Support > App & Client.

• On Smartphone
Download and launch the Reolink App or Client software, and follow the onscreen instructions to
finish initial setup.
Scan to download the Reolink App.
Set up the Camera Charge the Battery
NOTE: The solar panel is NOT included in the package, you can buy it on Reolink ocial
online stores.
Charge the battery with a power adapter
(not included)
* Battery can also be charged separately.
Charge the battery with Reolink
Solar Panel (Not included if you
only purchase the camera).
Charging indicator:
Orange LED: Charging Green LED: Fully charged
6English5 English
For the weatherproof performance, always
cover the USB charging port with the rubber
plug after finishing charging the battery.
• On PC
Download path of the Reolink Client: go to https://reolink.com > Support > App & Client.

• Use the camera skin for better weatherproof
performance when you install the camera
outdoors.
• Install the camera 2-3 meters (7-10 ft)
above ground. The detection range of
the motion sensor would be maximized
at such a height.
• For eective motion detection,
please install the camera angularly.
NOTE: If a moving object approaches the
PIR sensor vertically, the camera may fail
to detect motion.
Installation Guides Mount the Camera
to the Wall
8English7English
45
12
3
θ
Mounting
Height:
2-3 Meters
PIR Detecting Distance:
2-10 Meters
AB
Press the button to release the
plate from the security mount.
Lock the security mount on its
plate. (Make sure the top edge
of the plate is inserted into the
mount.)
Press the security mount
button until its plate clicks into
the mount.
Screw the camera, adjust its
angle and tighten the knob to
lock it.
Screw the security mount
plate into the wall.

• Use the camera skin for better weatherproof
performance when you install the camera
outdoors.
• Install the camera 2-3 meters (7-10 ft)
above ground. The detection range of
the motion sensor would be maximized
at such a height.
• For eective motion detection,
please install the camera angularly.
NOTE: If a moving object approaches the
PIR sensor vertically, the camera may fail
to detect motion.
Installation Guides Mount the Camera
to the Wall
8English7English
45
12
3
θ
Mounting
Height:
2-3 Meters
PIR Detecting Distance:
2-10 Meters
AB
Press the button to release the
plate from the security mount.
Lock the security mount on its
plate. (Make sure the top edge
of the plate is inserted into the
mount.)
Press the security mount
button until its plate clicks into
the mount.
Screw the camera, adjust its
angle and tighten the knob to
lock it.
Screw the security mount
plate into the wall.

Magnet (for Argus 2 only)
Remove the Camera
Attach the Camera to a Tree
10English
9English
12 3
Thread the provided strap to
the mounting plate.
Fasten the mounting plate
to a tree.
Press the security mount button
to remove the mount out.
Unscrew the camera from the
security mount.
Follow the steps 3-5 in the wall
mounting to finish installation.
12 3
12
Put up the skin, provided in
the package, for Reolink
Argus 2 camera.
There is an anti-falling safety
rope. Please fasten the other
end of the rope to the wall
mount when mounting it into
a wall.
Stick the camera to the wall
mount and twist the camera
to adjust direction.

Magnet (for Argus 2 only)
Remove the Camera
Attach the Camera to a Tree
10English
9English
12 3
Thread the provided strap to
the mounting plate.
Fasten the mounting plate
to a tree.
Press the security mount button
to remove the mount out.
Unscrew the camera from the
security mount.
Follow the steps 3-5 in the wall
mounting to finish installation.
12 3
12
Put up the skin, provided in
the package, for Reolink
Argus 2 camera.
There is an anti-falling safety
rope. Please fasten the other
end of the rope to the wall
mount when mounting it into
a wall.
Stick the camera to the wall
mount and twist the camera
to adjust direction.