Reolink Argus PT User manual

EN/DE/FR/IT/ES
Reolink Argus PT / Reolink Argus PT Pro
Operational Instruction
@ReolinkTech https://reolink.com
Aug 2021
QSG2_B
58.03.005.0026
Technical Support
If you need any technical help, please visit our ocial support site and contact our support
team before returning the products https://support.reolink.com
Technische Unterstützung
Wenn Sie Hilfe brauchen, kontaktieren Sie bitte Reolink Support Team zuerst, bevor Sie Ihre
Bestellung zurücksenden. Meiste Fragen oder Probleme können von unserem Online Support
Center beantwortet und gelöst werden https://support.reolink.com
Support technique
Si vous avez besoin d’aide, veuillez contacter Reolink avant de retourner votre produit. La
plupart des questions peuvent être répondues via notre centre de support en ligne à l’adresse
https://support.reolink.com
Supporto Tecnico
Se avete bisogno di aiuto, le chiediamo gentilmente di contattare Reolink prima di restituire il
prodotto.La maggior parte delle domande può essere risolta tramite il nostro centro di
assistenza online all’indirizzo https://support.reolink.com
Soporte Técnico
Si necesita ayuda, comuníquese con Reolink antes de devolver su producto. La mayoría de las
preguntas se pueden responder a través de nuestro centro de soporte en línea en
https://support.reolink.com
REOLINK INNOVATION LIMITED
FLAT/RM 705 7/F FA YUEN COMMERCIAL BUILDING 75-77 FA YUEN STREET MONG KOK KL
HONG KONG
APEX CE SPECIALISTS LIMITED
Product Ident GmbH
89 Princess Street, Manchester, M1 4HT, UK
[email protected]
Hoferstasse 9B, 71636 Ludwigsburg, Germany
[e-mail]
EU REP
UK REP

English English1 2
What's in the Box
Camera
Quick Start Guide Surveillance Sign Pack of Screws Mounting
Hole Template
Camera Bracket Micro USB Cable Antenna Reset Needle
EN
Content
What's in the Box 2
Camera Introduction 3
Set up the Camera 4
Charge the Camera 6
Install the Camera 7
Safety Instructions of Battery Usage 11
Troubleshooting 12
Specication 12
NoticationofCompliance 13

English English3 4
OFF
OPEN
ON
POWER
RST
MicroSD
OFF
OPEN
ON
POWER
RST
MicroSD
OFF
OPEN
ON
POWER
RST
MicroSD
Set up the CameraCamera Introduction
Set up the Camera on the Smartphone
Step 1 Scan to download the Reolink App from the App Store or Google Play store.
Step 2 Turn on the power switch to power on the camera.
Status LED
Lens
Built-in PIR Sensor
Daylight Sensor
Built-in Mic
Speaker
Reset Hole
Micro SD Card Slot
Micro USB Port
Antenna
Battery Status LED
Power Switch
Dierent states of the status LED:
Red Light: WiFi connection failed Blinking: Standby status
Blue Light: WiFi connection succeeded On: Working status
* Press the reset button with a pin to restore
camera to factory settings.
*Rotatethecamera’slenstondthereset
hole and the SD card slot.
OFF
ON
POWER
OPEN
OPEN
POWER
OFF
ON
POWER

English English3 4
OFF
OPEN
ON
POWER
RST
MicroSD
OFF
OPEN
ON
POWER
RST
MicroSD
OFF
OPEN
ON
POWER
RST
MicroSD
Set up the CameraCamera Introduction
Set up the Camera on the Smartphone
Step 1 Scan to download the Reolink App from the App Store or Google Play store.
Step 2 Turn on the power switch to power on the camera.
Status LED
Lens
Built-in PIR Sensor
Daylight Sensor
Built-in Mic
Speaker
Reset Hole
Micro SD Card Slot
Micro USB Port
Antenna
Battery Status LED
Power Switch
Dierent states of the status LED:
Red Light: WiFi connection failed Blinking: Standby status
Blue Light: WiFi connection succeeded On: Working status
* Press the reset button with a pin to restore
camera to factory settings.
*Rotatethecamera’slenstondthereset
hole and the SD card slot.
OFF
ON
POWER
OPEN
OPEN
POWER
OFF
ON
POWER

English English5 6
Charge the Camera
Step 3 Launch the Reolink App, click the “ ” button in the top right corner to add the camera.
ScantheQRcodeonthedeviceandfollowtheonscreeninstructionstonishinitialsetup.
Charge the battery with a power adapter.
(not included)
Charge the battery with the Reolink Solar Panel
(not included if you only purchase the camera).
For better weatherproof performance, please
always cover the USB charging port with the
rubber plug after charging the battery.
Step 2 Launch the Reolink Client, click the “ ” button, input the UID code of the camera to add it
andfollowtheonscreeninstructionstonishinitialsetup.
Step 1 Download and install the Reolink Client: Go to https://reolink.com > Support > App&Client.
Set up the Camera on PC (Optional)
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
Orange LED: Charging Green LED: Fully charged
Charging Indicator:
It’s recommended to fully charge the battery before mounting the camera outdoors.
OFF
OPEN
ON
POWER
OFF
OPEN
ON
POWER
OFF
OPEN
ON
POWER

English English5 6
Charge the Camera
Step 3 Launch the Reolink App, click the “ ” button in the top right corner to add the camera.
ScantheQRcodeonthedeviceandfollowtheonscreeninstructionstonishinitialsetup.
Charge the battery with a power adapter.
(not included)
Charge the battery with the Reolink Solar Panel
(not included if you only purchase the camera).
For better weatherproof performance, please
always cover the USB charging port with the
rubber plug after charging the battery.
Step 2 Launch the Reolink Client, click the “ ” button, input the UID code of the camera to add it
andfollowtheonscreeninstructionstonishinitialsetup.
Step 1 Download and install the Reolink Client: Go to https://reolink.com > Support > App&Client.
Set up the Camera on PC (Optional)
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
Orange LED: Charging Green LED: Fully charged
Charging Indicator:
It’s recommended to fully charge the battery before mounting the camera outdoors.
OFF
OPEN
ON
POWER
OFF
OPEN
ON
POWER
OFF
OPEN
ON
POWER

English English7 8
Drill holes in accordance with the
mounting hole template and screw the
security mount to the wall.
NOTE: Use the drywall anchors included in
the package if needed.
NOTE: For better WiFi connection, it is recommended to install the antenna upward or horizontally.
Mount the Camera to the Wall
Install the antenna to the camera. Screw the camera to the security mount
and adjust to the proper direction.
1
2
3
1
2
3
1
2
3
2
1
3
Install the Camera
• For outdoor use, the camera
MUST be installed upside
down for better waterproof
performance and better PIR
motionsensor’seciency.
• Install the camera 2-3 meters
(7-10 ft) above the ground. This
height maximizes the detection
range of the PIR motion sensor.
• For better motion detection
performance, please install the
camera angularly.
NOTE: If a moving object
approaches the PIR sensor
vertically, the camera may fail to
detect motion.
Mounting Height:
2-3 Meters
PIR Detection Distance:
2-10 Meters

English English7 8
Drill holes in accordance with the
mounting hole template and screw the
security mount to the wall.
NOTE: Use the drywall anchors included in
the package if needed.
NOTE: For better WiFi connection, it is recommended to install the antenna upward or horizontally.
Mount the Camera to the Wall
Install the antenna to the camera. Screw the camera to the security mount
and adjust to the proper direction.
1
2
3
1
2
3
1
2
3
2
1
3
Install the Camera
• For outdoor use, the camera
MUST be installed upside
down for better waterproof
performance and better PIR
motionsensor’seciency.
• Install the camera 2-3 meters
(7-10 ft) above the ground. This
height maximizes the detection
range of the PIR motion sensor.
• For better motion detection
performance, please install the
camera angularly.
NOTE: If a moving object
approaches the PIR sensor
vertically, the camera may fail to
detect motion.
Mounting Height:
2-3 Meters
PIR Detection Distance:
2-10 Meters

English English9 10
Pull the button of the security
mount and unscrew the bracket to
separate the two parts.
You are allowed to strap the camera to a tree with both the security mount and ceiling bracket.
Thread the provided strap to the plate and fasten it to a tree. Next, attach the camera to the
plate and you are good to go.
Mount the Camera to Ceiling Install the Camera with Loop Strap
Install the bracket to the ceiling. Align the camera with the bracket and turn the camera unit
clockwise to lock it in position.
1
2
3
1
2
3
1
2 3
1
2
3
1
2
3
1
2
3

English English9 10
Pull the button of the security
mount and unscrew the bracket to
separate the two parts.
You are allowed to strap the camera to a tree with both the security mount and ceiling bracket.
Thread the provided strap to the plate and fasten it to a tree. Next, attach the camera to the
plate and you are good to go.
Mount the Camera to Ceiling Install the Camera with Loop Strap
Install the bracket to the ceiling. Align the camera with the bracket and turn the camera unit
clockwise to lock it in position.
1
2
3
1
2
3
1
2 3
1
2
3
1
2
3
1
2
3