Repossi 120/1 User manual

Repossi
macchine agricole
Repossi macchine agricole
Via V. Emanuele II, 40 - 27022 Casorate Primo (PV) - Italia
Tel. **39 02 905 66 25 - Fax **39 02 905 13 08
e-mail: [email protected] - Web: www.repossi.it
Binasco Siziano
Opera Melegnano
Gaggiano
Pero
Rho
Monza
San Donato
Milanese
Abbiategrasso
LINATE
Landriano
Motta
Visconti
Bereguardo
Garlasco
PAVIA
Rozzano
MILANO
A7
A1
A4
A4
A8 A9
CASORATE PRIMO
GE
BO
TO
VE
VA
MALPENSA
CO
A7 uscita
Bereguardo
A7 uscita
Binasco
A1 uscita
Milano Sud
Milano
Milan
dal 1898
OPERATOR’S
MANUAL
Mod. 120/1
Mod. 145/1
Mod. 165/1

1
INDICE
-1- Recommendations for work safety.............................................3
1.1 Defined use.................................................................................3
1.2 Spare parts .................................................................................3
1.3 Protection devices......................................................................4
1.4 Before starting work...................................................................4
1.5 Transport of persons ..................................................................4
1.6 General.......................................................................................4
1.7 Cleaning the machine.................................................................5
-2- General guidelines for working with the Comb Rakes ............6
2.1 Safety guidelines.........................................................................6
2.2 Driving on public roads .............................................................7
2.3 Important warnings....................................................................7
-3- Use of the machine .......................................................................8
3.1 Assembling the machine.............................................................8
3.2 Tractor coupling.........................................................................9
3.3 For travelling on public roads.................................................10
3.4 Changing from transport to operational configuration...........11
3.5 Adjusting the height of the tines...............................................12
-4- Maintenance of the machine .....................................................13
4.1 General.....................................................................................13
4.2 Cleaning of machine parts .......................................................13
4.3 Belt tension...............................................................................14
4.4 Winter storage..........................................................................15
4.5 Lubrication chart .....................................................................16
-5- Technical data.............................................................................17
-6- Warning signs.............................................................................18
Rev.2.04/14

2
Dear Farmer, you have just made an excellent choice. Naturally we
are very happy and wish to congratulate you for having chosen Re-
possi. As your agricultural partner, we offer you quality and efficien-
cy combined with reliable servicing.
Please read thoroughly and comply with the information provided in
this instruction book. By doing so you will avoid accidents, preserve
the manufacturer’s warranty and always enjoy the advantages of a
reliable machine.
CE sign The CE sign, which is affixed by the manufacturer,
indicates outwardly that this machine conforms to the
engineering guideline regulations and the other rele-
vant EU guidelines.
EU Declaration of Conformity
By signing the EU Declaration of Conformity, the manufacturer de-
clares that the machine being brought into service complies with all
relevant safety and health requirements.

3
-1- Recommendations for work safety.
All points referring to safety in this manual are indicated by
this sign.
Before starting with operations check both implement and tractor for
working and road safety.
1.1 Defined use
a) The “REPOSSI” side delivery rake is intended solely for normal
use in agricultural work:
The swathing of forage, silage fodder and straw.
Any other uses are regarded as not included in this definition.
The manufacturer takes no responsibility henceforth for any
resulting damage which may occur. The user carries sole risk.
b) The keeping of operating, service and maintenance requirements
lay down by manufacturer also come under the heading of “de-
fined use”.
1.2 Spare parts
a) The original components and accessories have been designed es-
pecially for these machines
and appliances.
b) We want to make it quite
clear that components and ac-
cessories that have not been
supplied by us have not been
tested by us.

4
c) The installation and/or use of such products can, therefore, nega-
tively change or influence the construction characteristics of the
appliance. We are not liable for damages caused by the use of
components and accessories that have not been supplied by us.
d) Alterations and the use of auxiliary parts that are not permitted by
the manufacturer render all liability invalid.
1.3 Protection devices
All protection devices must remain on the machine and be main-
tained in proper condition. Punctual replacement of worn and dam-
aged covers is essential.
1.4 Before starting work
a) Before commencing work, the operator must be aware of all oper-
ating devices and functions. The learning of these is too late after
having already commenced operation.
b) The machine is to be tested for traffic and operating safety before
each operation.
1.5 Transport of persons
a) The transport of persons on the machine is not permitted.
b) The machine may only be driven on public roads when in the po-
sition stipulated for road transport.
1.6 General
a) The mounting and dismounting operations on the tractor and the
relative regulations must be carried out only by the tractor driver.
He must be sure that no other person is in the neighborhood, be-
fore starting the work.
b) The prescription for the prevention of the accidents, as also all the
other general technical dispositions, the norms for the street circu-
lation, the emergency and the hygiene must be observed.
c) For all maintenance, service and modification work, turn driving
motor off and remove universal drive.

5
1.7 Cleaning the machine
Do not use high-pressure washers for the cleaning of bearing and hy-
draulic parts.
REPOSSI realized a rake compliant with safety requirements.
Now depends from you a safe use of this machine, following the next
instructions you will always work in safety conditions, you will have
high performance and efficiency without failure.
Please, read carefully the following instruction.

6
-2- General guidelines for working with the Comb
Rakes
2.1 Safety guidelines
(See 1.1 –1.3 –1.4)
All work in the immediate area of the rakes may only be carried out
when the p.t.o. is switched off.
Caution!
Do not enter rake area while driving mo-
tor is running.
National safety and accident prevention regulations must be fol-
lowed as well as the advice given in this manual.
Read the stickers applied to
the machine and take particu-
lar note of those which carry
safety advice.
These fittings should be handled and transported only by a power
cultivator.
For storage, we suggest the fitting be placed in stable and safe
conditions preventing the springs being exposed to tampering by
people.

7
2.2 Driving on public roads
Observe the traffic regulations in force in your Country.
Going on open roads may only be carried out as described in
chapter “Transport position”.
2.3 Important warnings
ADOPTED CONVENTIONS: Right side or Left side of the ma-
chine are intended as the Right side and the Left side watching the
machine from the rear
Check regularly the tire pressure (1.9 bar ).
After the first 5 hours of operation, all nuts and bolts must be
checked and tightened if necessary.