Reprolux Cineframe Series User manual

INSTALLAION MANUAL
FOR FIXED SCREEN
Please read this manual carefully before installing

Handle with care ininstallation
Process to avoid fall.
Figure 2
Insert the corners into two
Long sides.
Figure 4
Finally long side installation
Finished.
Figure 6
Connect corners with side
by screws.
Figure 1
Insert conrners.
Figure 3
Installation of left and right
Short sides finished.
Figure 5
Overall frame picture.
Figure 7

Operation Guide for buckle.
Figure 9
Same distance for two near
Figure 8
Install buckles.let buckess,
Let buckless clip on fabric
Tubule pole in fabric tubule.
Figure 10
After installing of all buckles
Adjust them to same position
Between two opposite.
Figure 12
Fasten all of the buckles into
Recess of four sides.
buckless,about 300mm.
Figure 11
The connection between
Buckles and frame.

Figure 13
Install brackets. After this,
Installation is finished.
1、Side 4PCS
2、Steel pole 4PCS
3、Conner 4PCS M5x25
4、Screw 16PCSM5x10
5、Screw 4PCS
6、Buckle Some
7、Bracket 2PCS
8、Fabric 1PCS
9、Manual 1PCS
Operation direction
First: Installation finished according to the above
drawing, then can choose the appropriate
position to be hanging.
Second: The bottom frame of the fixed screen
should leave the ground about 1.2-1.5
meters.
Third: Attentions:To guarantee the projection

effect and quality for the product,pls
accord the following way to operate.
1.Pls do not touch the screen surface use any
Incisive hard things such as nail
2.Pls use the soft cotton fabric to clear the
screen surface.
Four:
Applicable scope:
Home theatre system, Entertainment
places,Clubs,Business demonstration and so on