RE202_Honeywell-Compat_Pencil_DWS_Instructions.doc Pa e 1 of 3 28-Jul-11
www.ResolutionProducts.com
Wireless
Security
Solutions
RE202 Honeywell-Compatible Pencil Door / Window
Features
•Senses openin or separation. Narrow mountin locations.
•½ width of competitive products. Great for casements!
•Ma net and Internal reed switch operation.
•Ma net can mount beside or over sensor housin .
•Stron , reliable RF si nal.
•8-10 year battery life on 2-AAA batteries.
ey Instructions
•Battery “+” faces towards white “+” on circuit board.
•Install batteries: rear batt – tail in first, front battery – nose in first.
•Board oes in and out of housin without batteries (not with).
•Reed switch is at the top of the housin , near the push button hole.
•Reed switch = Loop 2
•(Insertin battery will send a Loop 4 Tamper, but Sensor does not
actually have a tamper)
•Enrollin :
Place Panel in RF Learnin mode.
Input Type = RF
Lynx *56 “E I” mode:
To enroll any particular loop: cause the loop to fault…
restore… (panel should beep to indicate ID capture)…
fault… restore… [panel will confirm enrollment].
Vista *56 “10 INPUT S/N: L” mode:
Transmit two open/close sequences (usin ma net).
Press * (to check for duplicate serial/loop number).
Press * (to continue to confirmation screen).
Press * if you wish to skip confirmation; or “Yes” and
activate the loop to confirm.
RE202_Honeywell-Compat_Pencil_DWS_Instructions.doc Pa e 2 of 3 28-Jul-11
www.ResolutionProducts.com
Operation
•Ma netic reed switch:
Alarm, when…
… ma net is pulled away from reed switch.
•Supervisories, every hour.
Specifications
Ma net trip distance: 0.75 inch nominal
Mountin hardware: # 4 or #6 screws
Replacement Battery: 2 AAA Alkaline
Temperature Ran e: 0F to 120F
Housin dimensions: 4 x 0.6 x 0.9 inches.
Specifications subject to chan e without notice.
Internal Picture
ID Barcode
plate
Positive
position
Switch
