ResortLOCK RL2000 User guide

General Information
¾Reset lock: press and hold reset button for 5 second, one short beep,
continue hold for another 5 second, three short beeps
¾User capacity: up to 299 users, combination of iButton, keypad, or
dual access users
¾Access option: iButton, keypad, iButton+keypad, mechanic key
¾Index #: 001 – 299, automatic generated in sequence by lock
¾Deleted user index will be filled by the next add-on user
Manufactory Default Setting
¾Day time saving disable
¾Auto unlock/lock disable
¾Background light on
¾Default master code: 123456
¾Storehouse mode
Terms
¾MC: Master Code
¾Time format: YYMMDDHHMM (year month date hour minute)
¾Passage mode: When Passage Mode is enabled, the lock will stay in
unlock after first valid entry. Re-enter a next valid entry to lock
¾Storehouse mode: for each valid entry, lock will automatically lock
back
¾Auto unlock/auto lock: Lock will automatically unlock/lock
everyday at setting time. Enable/disable function first
¾Lockout: Enable the Lockout mode will freeze the lock at its current state (Lock or unlock), temporarily
disable all the users’ code and iButton keys until the 99 code re-entered
Failure to follow the exact procedure can result in erratic lock behavior.
Tips for a new setup
1. Change master code
2. Set lock time
3. Enable auto lock /auto unlock function and set function time (if needed)
4. Add users
Set New or Change Master Code (and not delete existing user code)
# current or default mc # 11 # 1-6 digits new mc # 1-6 digits new mc #
Change Master Code (and delete all user code)
# current or default mc # 22 # 1-6 digits new mc # 1-6 digits new mc #
1. Set date / time
# mc # 88 # yymmddhhmm #
2. Enter one or more user code with no restriction (for multiple code, repeat yellow part)
# mc # 01 # 1-8 digits user code # # #
3. Enter one or more iButton key with no restriction (for multiple code, repeat yellow part)
# mc # 01 # iButton key # #
4. Enter one or more iButton key + user Code with no restriction (for multiple code, repeat yellow part)
# mc # 01 # 1-8 digits user code # iButton key # #
5. Enter one or more user code with time restriction (for multiple code, repeat yellow part)
(beginning time) (ending time)
# mc # 01 # 1-8 digits user code # yymmddhhmm # yymmddhhmm #
6. Enter one or more iButton key with time restriction (for multiple code, repeat yellow part)
(beginning time) (ending time)
# mc # 01 # iButton key yymmddhhmm # yymmddhhmm #
Q
uick O
p
eration Guide
RL2000

7. Enter one or multiple ibutton + user codes with time restriction (for multiple, repeat yellow part)
(beginning time) (ending time)
# mc # 01 # 1-8 digits user code # iButton key yymmddhhmm # yymmddhhmm #
8. Disable one or multiple user (using index) (for multiple user, repeat yellow part)
# mc # 02 # 3 digits index number #
9. Enable one or more user (using index) (for multiple user, repeat yellow part)
# mc # 03 # 3 digits index #
10. Enable/ disable Passage Mode
# mc # 15 #
11. Enable/ disable LED blink
12. Enable daytime saving
# mc # 31 #
13. Disable daytime saving
# mc # 32 #
14. Add One Time Service codes (up to 10) (for multiple user, repeat yellow part)
# mc # 33 # 1-8 digits user code #
15. Enable keypad backlighting
# mc # 34 #
16. Disable keypad backlighting
# mc # 35 #
17. Delete one user or multiple users (for multiple user, repeat yellow part)
# mc # 44 # 3 digits index #
18. Enable auto-unlock function
# mc # 64 #
19. Disable auto-unlock function
# mc # 65 #
20. Set automatically unlock time (Enable function 64first)
# mc # 63 # hhmm #
21. Enable auto-lock function
# mc # 67 #
22. Disable auto-lock function
# mc # 68 #
23. Set Automatically lock time (Enable function 67first)
# mc # 66 # hhmm #
24. Enable/Disable temporary lockout all the users
# mc # 99 #
# mc # 18 #
2beeps: passage mode.
4 beeps: storehouse mode
2beeps: blink off.
4 beeps: blink on