ReSound LiNX Quattro 61 User manual

Quick guide
ReSound LiNX Quattro™61

Product: ReSound LiNX Quattro
Model: 61
Serial number (R):
_______________________________
Serial number (L):
_______________________________
Battery size: Lithium-ion
My hearing aid information
PROGRAM WHEN TO USE BEEPS
11
22
33
44
Programs:
(if set up by your hearing care professional)

5. LED light indicator
6. Microphones
7. Right/Left indicator
8. Serial number and model
3
8
7
1. Push button
2. Receiver
3. Open dome
4. Receiver wire
6
View ReSound’s hearing aid tutorial videos at youtube.com/resoundus.
Get to know your hearing aid
1
4
2
5
6
6

Your hearing aids are automatically
turned on when they are removed
from the hearing aid charger. They
can also be turned on and o manu-
ally by pressing the push button for 5
seconds.
What you need to know
Getting started: On/O function
6.2 Hearing aid charger
1. Hearing aid charging bay
2. Receiver bay
3. Hearing aid battery indicator
4. Left indicator (blue)
5. Right indicator (red)
6. Charger battery indicator
7. Charging cable
8. Charging cable port (micro-USB)
1
2
4
3
8
7
6
5

• The five LEDs at the front of the
charger indicate the battery
status of the hearing aid with
the lowest battery level for 10
seconds when inserted or
removed (while the hearing aids
continue to charge).
Hearing Aid Battery Indicators
LEDs Battery Level
0-20%
20-40%
40-60%
60-80%
80-100%
When charging
Pulsating
When fully charged
On-until removed
How to charge your hearing aids
• Plug the power adaptor into
a power outlet and connect the
charging cable to the hearing aid
charger.
• Place both hearing aids in
the charging bays. The right side
is marked with a red dot and the
left side is marked by a blue dot.
• Place hearing aids so the receivers
go into the receiver bay.
• The LED on the hearing aids
slowly pulsates
when charging
and will stay solid
when fully charged.

How to charge the charger
• Plug the power
adaptor into a
power outlet and
connect the
charging cable
to the hearing aid
charger.
• The three LEDs at the back of
the charger show the battery
level of the hearing aid charger.
• When the hearing aid charger
is fully charged, it has a
capacity of at least 3 full
hearing aid charges before it
needs to be plugged in and
recharged.
LEDs Battery Level
LED is blinking
red. Less than 10%
power reserve.
10-33% charged
33-66% charged
66-100% charged
400965011 Rev A 2018.06
400965011
For more information
Refer to the user guide included in
your hearing aid box.
Your hearing care professional can
be reached at:
View ReSound hearing aid tutorial
videos at youtube.com/resoundus.
ReSound Government Services
8001 E Bloomington Freeway
Bloomington, MN 55420
USA
1.800.392.9932
www.resound.com/veterans
Manufacturer according
to FDA:
GN ReSound North America
8001 E Bloomington Freeway
Bloomington, MN 55420
USA
1.888.735.4327
resound.com

Flight mode:
Some airlines prohibit the use
of wireless hearing aids (RF
transmitters) onboard.
To use Flight mode, make sure this is
activated by your hearing care profes-
sional.
Follow these steps to turn on Flight
mode:
1. Turn the hearing aid o.
2. Press the push button for 9
seconds.
3. The hearing aid responds with
four times double flashes and
double-dings for ten seconds.
To deactivate Flight mode:
1. Turn the hearing aids o and then
on.
Daily: Clean your hearing aid.
Keep your hearing aids dry. Clean
the hearing aids using a soft cloth
or tissue.
Weekly: Clean the receiver
tubes and domes (E).
Use a soft cloth to clean the
receiver tube and dome on the
outside. Do not use water when
you are cleaning the receiver tubes.
Regular care & maintenance

Monthly: Change the wax guard or
see your hearing care professional.
For changing CeruSTOP™(white)
wax guards, complete the following
steps:
Removal: Insert the removal side
of the wax guard tool into the used
wax guard so that the shaft of the
tool is touching the rim of the
wax guard. Slowly pull the wax
guard straight out.
Insertion: To insert the new wax
guard, gently press the replacement
side of the wax guard tool straight
into the hole of the sound outlet
until the outer ring lies flush with the
outside of the receiver. Pull the tool
straight out. The new wax guard will
remain in place.
removal side replacement side
Wax guard tool
12
30
How to apply domes
It is recommended that your hearing care
professional change domes, as incorrect
dome replacement could result in injury.
ReSound standard domes
1. Push the new dome over the receiver.
2. Make sure that the new dome is
properly and securely mounted.
ReSound tulip domes
Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip
domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure
this:
1. Push the largest petal away from
the receiver tube using a finger. This
bends the petal forward.
2. Then push the largest “petal” back,
and it will be placed on top of the
smaller petal.
400344011-US-15.04-Rev.B.indd 30 20-05-2015 11:48:59
12
30
How to apply domes
It is recommended that your hearing care
professional change domes, as incorrect
dome replacement could result in injury.
ReSound standard domes
1. Push the new dome over the receiver.
2. Make sure that the new dome is
properly and securely mounted.
ReSound tulip domes
Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip
domes consist of two “petals”. It is important to note that the largest petal is the outermost petal. To ensure
this:
1. Push the largest petal away from
the receiver tube using a finger. This
bends the petal forward.
2. Then push the largest “petal” back,
and it will be placed on top of the
smaller petal.
400344011-US-15.04-Rev.B.indd 30 20-05-2015 11:48:59
Regular care & maintenance
As needed: Change dome (E)
ReSound standard domes
1. Push the new dome over the
receiver.
2. Make sure that the new dome is
properly and securely maintained.
ReSound tulip domes
Tulip domes consist of two “petals”. It
is important that the largest petal is
the outermost petal. To ensure this:
1. Push the largest petal away from
the receiver tube using a finger.
This bends the petal forward.
2. Then push the largest petal
back, and it will be placed on top
of the smaller petal.

View ReSound hearing aid tutorial videos at youtube.com/resoundus.
BEEP/TONE INDICATION ACTION REQUIRED
Ding, ding, ding, dong Low battery Charge battery
Ding (5 or 10) Hearing aid is starting up After dings cease, hearing aid
is turned on
Ding-ding,
ding-ding, etc.
Hearing aid is in flight mode Use in flight mode if desired,
or turn the hearing aids o
and then on
Ripple tone Hearing aid is in streaming
mode
Use with wireless
accessory or press the push
button to exit streaming
mode
If there are any other problems not mentioned in this guide, please contact ReSound
or your hearing care professional.
Beep/tone indicators

SYMPTOM CAUSE POSSIBLE REMEDY
No sound Blocked earmold or tube
Blocked wax guard
Clean earmold or tube
Replace wax guard (D) or consult your hearing care professional
Not loud enough Blocked earmold or dome (E)
Change in hearing, volume too low
Excessive ear wax
Clean earmold, replace dome (E), replace guard (D)
Consult your hearing care professional
Consult your hearing care professional
Excessive
whistling/feedback
Incorrect earmold placement
Incorrect dome (E) placement
Excessive ear wax
If none of the above
Re-insert earmold carefully
Re-insert dome (E)
Clean guard/consult your hearing care professional
Consult your hearing care professional
Wireless does not work Device may be in flight mode Turn the hearing aid o and then back on
Hearing aid is not
charging
Does the hearing aid sit correctly in the
charger?
Is the hearing aid charger charged?
Reinsert the hearing aid in the charger.
Plug the charger into a power outlet and connect the
charger cable to the hearing aid charger.
Why do my hearing aids
not turn on automatical-
ly, although they have
been in the charger for
an extended period of
time?
If you leave your hearing aids in the charger
for more than 24 hours, the charger will go
into standby mode and turn o the power
of the hearing aids. If the charger runs out
of battery power during charging of the
hearing aids, it will instruct the hearing aids
to turn o power to preserve energy.
Remove the hearing aids from the charger and press the
push button for 5 seconds to turn the hearing aids on
manually.
Troubleshooting