ReSound X-plore BTE XE61-DI User manual

Ut wis dolobortio
Enim volore dunt lum dolortie digna adigna consectem non hent nos ero
dolorero od dolor sumsandipit nos nullaor ipisi tet ad dunt ad moluptat
nim alit luptatummy nostie duipism odolobore diam vel esent iustiss
equipis atue mincidu issent iurer si.
Ibh erci exerilit autem accum quismolobor iliquat atem veriuscilit luptat.
Ut nulpute tem zzrillum dolutate faccumsan henit lobore commy nullutat
voluptatum nonsequ isisi.
Uptatum volutpat accummy nis am, susto dolutatum ipsusci tie delestie
magna feui eugiat ipit ulput aliquisi tetum eugiat wis nim vullamc onulla
commod essi.
Xerostio cor sumsandip exerilla faccumm olorpero euissim do odo-
lore modit loreetuer si euis nim in ut utat. Te commy nonulla orperit alit
adipsum quat vullaore erci eugiatuer sequam veriure esto eum dipisl ulla
faccumm odolobore veliquis eugait, sit nit wis adit vendiam vero eu-
giamcons augue commodo od diatis eummy nulput veliquis nit nos nulla
amet, ver si.
Nos nibh et alit irilisi.
1
USER GUIDE
ReSound X-plore
BTE XE61-DI
c
o
n
n
e
c
t
f
o
c
u
s
m
o
v
e

2
3
ReSound X-ploreTM
Your new digital ReSound X-ploreTM hearing instruments will enable you
to hear sounds that you may not have heard in years because of your
hearing loss. Practice and a positive attitude are important in learning
to use hearing instruments. While some people adjust quickly to
wearing hearing instruments in their ears and hearing the new sounds,
other people may need more time.
The intent of this user guide is to provide information on the many
aspects of using hearing instruments. Your hearing instruments have
been adjusted to your hearing loss by your hearing care professional.
Familiarising yourself with the functions of your new hearing
instruments will help you get optimal benefit.
ReSound X-ploreTM is a trademark of GN ReSound A/S.
Contents Page
Illustration of the hearing instrument.......................4
Adjusting to a world of new sounds ......................6
New sounds ........................................6
How to adjust .......................................7
How to use the hearing instrument .......................8
On/off function...................................... 8
Inserting the hearing instrument .........................9
Removing the hearing Instrument .......................11
Programme selector .................................12
Stand-by function ...................................14
Telephone use .....................................14
Direct audio input ...................................16
Low battery warning ................................18
Changing the battery ................................18
Maintenance .......................................19
Daily maintenance ..................................19
Cleaning the earmould . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Cleaning the Tube and dome ..........................21
How to apply the dome ..............................22
Warnings and precautions ............................24
Repairs ...........................................26
Technical data ..................................... 27
Troubleshooting ....................................28
Key word index .....................................32

4
5
Your ReSound X-plore Hearing Instrument
1. Programme Selector
2. Battery Compartment & On/Off Switch
3. Sound Outlet
4. 1st Microphone Sound Inlet
5. 2nd Microphone Sound Inlet
6. Direct Audio Input
6. Left/Right indicator
(Right=Red, Left=Blue)
8. Battery lock
9. Model and serial number on ID-plate
10. Manufacturer
2
1
5
3
4
XE61-DI
6
9
7/8
7/8
10
4
2

6
7
Adjusting to a World of New Sounds
A hearing loss is typically acquired gradually over many years. You may
have become accustomed to an everyday life with fewer sounds, which
also means hearing less noise than people with normal hearing.
With your new hearing instruments you will experience many sounds that
you may not have heard for years. It will take time to get used to all these
sounds again. Some examples of these sounds are:
• Theclockticking
• Turningpagesofthenewspaper
• Children’svoices
• Whispersandsoftspeech
• Carnoise
• Birdsong
• Thesoundofyourownfootsteps
How to adjust
If you are inexperienced with hearing instruments it is advisable to:
1. Use your hearing instruments every day.
2. Wear your hearing instruments for just a couple of hours a day
during the first week.
3.Gradually increase the time you wear your hearing
instruments.
It can take several months for your brain to get used to all the “new”
sounds around you. Start using your hearing instruments in mainly
quiet surroundings and start with a comfortable volume (the hearing
care professional will ensure this). Listen to and get familiar with all
sounds in your home, such as a ticking clock, water running in the
sink, or silverware used on a plate. In quiet surroundings, converse
with a person you know well. Listen to a TV or radio at home. After
you have used the hearing instruments for a while you will be ready for
more demanding listening situations, like conversation with a group of
two or three people.

8
9
How to Use the Hearing Instrument
On/Off Function
1. When the battery compartment is fully closed, the instrument is turned
on and programme 1 will be activated.
2. To turn the instrument off, open the battery compartment.
Many individuals use their finger tips to pull it open.
3. The instrument is then switched off.
4. Whenever you are not using the instrument, remember to open
the battery door to turn the hearing instrument off to stop battery
consumption.
You can turn on your hearing instrument once you have placed it behind
your ear and inserted the tube in your ear. If you prefer not to have the
device ”on” while placing it behind your ear, your hearing care profes-
sional can activate a function (SmartStart) which will delay the instrument
turning on. This function will prevent the hearing instrument from squeal-
ing while the tube or mould is being inserted in the ear. It delays the
switch-on time by 10 seconds after closing the battery compartment.
A beep each second is presented during this time.
Inserting the Instrument (with earmould)
1. Hold the earmould between your thumb and
index finger and position its sound outlet in
your ear canal.
2. Slide the earmould all the way into your ear
with a gentle, twisting movement (insertion
can be easier if you gently pull your ear up
and back with your other hand).
3. Turn the top-part of the earmould gently
backwards and forwards so that it tucks
behind the fold of skin above your ear canal.
4. Place the hearing instrument behind your ear.
5. Move the earmould up and down and press
gently to ensure it is positioned correctly in
the ear.
6. When the earmould and hearing instrument
are correctly positioned, and you have
not already turned it on, switch on your
instrument by closing the battery door.
Tip
Opening and closing your mouth can ease insertion.

10
11
Inserting the Instrument (with dome)
1. Place the hearing instrument behind the ear.
2. Hold the tube where it bends and gently push
the dome into your ear canal (the dome should
be placed far enough into the ear that the tube
lies flush with your head).
3. It is important that the tube and the dome fit
correctly into your ear.
4. When the dome is placed correctly, you should
not be able to see the tube sticking out when
you face a mirror.
Note
You should never attempt to bend or modify the
shape of the tube.
Removing the Hearing Instrument
To remove the hearing instrument, simply pull the tube outward with
your thumb and forefinger. Consult your hearing care professional if you
have difficulties removing the hearing instrument.

12
13
Programme Selector
You can have up to four different programmes on your hearing instru-
ment. The selection of programmes can be changed by your hearing
care professional.
1. You can switch between programmes by pushing the programme
selector once.
2. You will then hear one or more “beeps”. The number of beeps
indicates which programme you have selected.
3. You can always return to programme 1 by turning your instrument off
and then on again, or by placing it in stand-by mode
and then returning to its operating mode.
Your Programme Environments:
(to be completed together with your hearing care professional):
Programme Description of when to use
1
2
3
4

14
15
Stand-by Function
In stand-by mode, the hearing instrument will not process sound or
deliver an acoustic signal to the ear. When in this mode, a small amount
of power will be used. To put the instrument in stand-by mode, hold
down the programme selector for 5 seconds. You will hear a series of
beeps and the device will be in stand-by mode. To return to standard
mode, press the programme selector once. This can only be done after
at least 5 seconds in the stand-by mode.
Telephone Use
You can use the telephone with your
hearing instruments. Using the telephone
while using your hearing instruments may
require some practice.
By selecting the optional telecoil programme
you can improve understanding of speech
when using a telecoil compatible phone.
Rather than picking up the sound from the telephone, this programme
onlypicksupthetelephone’smagneticsignalandconverts
it to sound. Your hearing care professional can activate the telecoil.
When using the telecoil programme, the receiver of the telephone
should be held as shown in the drawing. You may need to move the
handset around slightly to find the best reception.
If you do not wish to have a telecoil programme, you may still use the
phone while using your hearing instrument. Hold the phone close to
the front microphone of the hearing instrument, but not directly on it.
If it whistles, it may take a few seconds for the instrument to adapt.
If the whistling continues, move the telephone 2-3 cm away from
your ear. Some hearing instruments also have an acoustic telephone
program. This program might decrease problems with acoustic
feedback when using the telephone.
Using tele-loop systems
Many gathering places such as schools, theatres and houses of worship,
are equipped with tele-loop systems. To take advantage of such
a system, select the telecoil program to pick up direct sound. If the
hearing instrument goes dead when the telecoil program is selected,
the tele-loop system may not be turned on or not operating correctly.
If a school, theatre or house of worship does not have a tele-loop
system, try to sit as close as possible to the front and use one of the
microphone programmes.

16
17
Direct Audio Input (DAI)
Using the Direct Audio Input socket enables direct, undisturbed connec-
tion to facilities such as: Television - Radio - Remote microphone.
How to connect the Audio boot to the hearing instrument:
Pay close attention to the illustrations on how to connect and
disconnect the audio boot below
1. Make sure the tip of the audio boot is placed firstly in the HAI
(Hearing Instrument Accessories Interface).
2. Click the audio boot on to the hearing instrument.
3. The Audio boot is now connected.
How to disconnect the Audio boot:
Important: Do not disconnect the audio boot without pushing the
release button first.
4. Push the release button on the front side of the Audio boot.
5. Gently remove the Audio boot.
The sound source is connected to your instrument with a cable or a
wireless FM system to the audio boot. The audio boot will connect
with a “click” to the hearing instrument and switch to Direct Audio Input
automatically.
12
3
45

18
19
Maintenance
Daily Maintenance
It is important to keep your hearing
instrument clean and dry every day. To
clean the instrument, use a soft cloth.
If the instrument has been exposed to
high humidity or perspiration, use a
drying kit that is available from your
hearing care professional.
To avoid the need for repairs:
1. Never immerse the instrument in water or other liquids since this
may cause permanent damage to the hearing instrument.
2. Protect your hearing instrument from rough handling, and avoid
dropping it on hard surfaces or floors.
3. Do not leave the instrument in or near direct heat or sunlight since
excessive heat can damage the instrument or deform the casing.
Low Battery Warning
Your hearing care professional can activate a Low Battery Warning
function in your hearing instruments. When the battery voltage/power
decreases to a certain level, the instrument will emit five soft beeping
signals. This sequence will continue every five minutes until the instrument
automatically switches off. The occurrence of the sequence can differ by
using rechargeable batteries and also between different battery brands.
It is recommended that you keep a spare battery on hand.
Changing the Battery
1. Gently push the battery compartment to open.
2. Use a magnet pin to remove the battery,
if at hand.
3. After removing the old battery, insert
the new one. It is important to insert
the battery with the positive side in the
correct position. The battery door has a
+ marking to help determine correct insertion.
4. Always use Zinc-Air or rechargeable batteries size 312.
Tip
Removing the battery when you are not wearing the instrument for a
longer period will help prevent corrosion of the battery contacts.