RESPIMAT SOFT MIST User manual
THIS REFERENCE CARD HAS BEEN DEVELOPED TO ASSIST HEALTHCARE PROFESSIONALS DEMONSTRATING
DAILY USE AND REPLACING A CARTRIDGE IN
THE RESPIMAT REUSABLE SOFT MIST INHALER
Cap
Mouthpiece
Air vent
Dose release
button
Safety catch
Clear base
Dose indicator
Cartridge
Respimat Soft Mist Inhaler
For demonstration videos and other resources,
visit www.respimat.com.au or scan the QR code
Keep your Respimat device. Each device
can be used with up to 6 cartridges.
How to insert a new cartridge1
1. REMOVE CLEAR BASE
2. INSERT CARTRIDGE
FIRST CARTRIDGE
IN A NEW DEVICE
•Press the safety
catch while
pulling o the
clear base.
TO REPLACE A
CARTRIDGE
•When the red arrow
appears on the dose
indicator, turn the
clear base until it
detaches.
•Pull out the empty
cartridge and
dispose.
•Tick the cartridge
counter.
•Replace the clear base.
•Prepare for use as
you usually would with
Turn, Open, Press.
•Insert the
cartridge.
•Place the inhaler
on a firm surface
and push down
until it clicks
into place.
BICO20489W Reusable Reference Card 297x210 v3b.indd 1BICO20489W Reusable Reference Card 297x210 v3b.indd 1 19/1/21 3:33 pm19/1/21 3:33 pm
• Keep the cap closed.
• TURN the clear base in the
direction of the arrows on the
label until it clicks (half a turn).
• OPEN the cap until it snaps
fully open.
• Breathe out slowly and
fully, away from the inhaler.
• Close your lips around
the mouthpiece.
• While taking in a slow, deep
breath, PRESS the dose release
button; keep breathing in slowly.
• Repeat Turn, Open, Press for a
total of two pus.
PressOpenTurn
TWO
PUFFS
ONCE
DAILY1
THREE SIMPLE STEPS FOR DAILY USE – T.O.P.1
Reference: 1. Placebo Respimat Instructions for Demonstration. RESPIMAT®is a registered trademark of Boehringer Ingelheim. Boehringer Ingelheim
Pty Ltd. ABN 52 000 452 308. 78 Waterloo Road, North Ryde, NSW 2113. PC-AU-101764. Date of preparation: January 2021. BICO20489W. Ward6.
BICO20489W Reusable Reference Card 297x210 v3b.indd 2BICO20489W Reusable Reference Card 297x210 v3b.indd 2 19/1/21 3:33 pm19/1/21 3:33 pm
