Response AR-3130 User manual

User Manual
Stereo Handsfree Bluetooth®Car Kit
AR-3130

FEATURES:
- Bluetooth® handsfree car kit.
- Plug into vehicle’sAUX input for hands-free function with any Bluetooth® enabled phone.
- DSP echo cancellation technology.
- A2DP Bluetooth®, transmit audio from any brand mobile phone to the car stereo via Bluetooth®.
- Built-in rechargeable battery.
SPECIFICATIONS:
Bluetooth® unit size: 53.6mm x 17.3mm x 14.8mm
Color: Black
Bluetooth® class: CSR BC8640, Bluetooth® V3.0
EQ mode: Stereo
Charging port: Micro USB
Built-in battery capacity: 100mAh
Charging hours: 2 hours
Working hours: 4 hours
Standby hours: 90 hours
Weight: 10g
Working temperature: 0 – 45° Celsius
Working interface: 3.5 mm AUX-in
PAIRING YOUR PHONE:
- Plug the Bluetooth® unit into vehicle’s MP3/AUX input.
- Press and hold the Multi-function button (MFB button) for 7 seconds to turn on and activate pairing mode, the
unit LED will begin to flash red and blue. The unit will only enter into pairing mode when this process is done
from the device being off.
- From your mobile phone, turn on Bluetooth® and search for device name “AR3130”, connect using the pass
code “0000”.

USING THE MULTI-FUNCTION BUTTON (MFB)
Power on to Bluetooth® pairing mode: Press and hold for 7 seconds, the LED begins to flash red and blue,
device name is “AR3130”
Power on normally: Press once
Power off: Press and hold for 5 seconds
Answer call: Press once when the phone rings
End call: Press once during call
Redial last call: Press twice
Ignore call: Press and hold for 2 seconds when phone rings
Auto re-connect the Bluetooth®: Press and hold for 3 seconds
Note:
- All functions are activated by the multi-function button (MFB).
- The unit will enter pairing mode on the initial power-on only.
LED INDICATOR LIGHT STATUS
In pairing mode: Red and Blue flashing
Connected to mobile: Blink Blue LED
During phone call: Blue LED flashing quickly
Music playing mode: Blue LED flashing slowly
Low battery: Red LED flashing quickly
Charging unit: Solid Red LED
Full charged: Solid Blue LED
NOTE:
- When charging, plug in the charger before powering on the Bluetooth® unit. Plugging in the charger while the
Bluetooth® unit is in use will cause the unit to disconnect from the phone.
- Keep the unit and charger away from any liquid.
- Never attempt to open, repair or modify any part of the unit.
IMPORTANT:
Check local laws regarding the use of a mobile phone and a handsfree kit while driving. If you use the
Bluetooth® unit while driving, ensure your attention and focus remains on your responsibility of driving safely.

Distributed by:
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: [phone]
Fax: [phone]
www.techbrands.com