Retekess T115 User manual

Wireless Guest Paging System User Manual
T115

CONTENTS
Description
Features
Diagram of Transmitter
Diagram of receiver
Pairing method
Adjust reminding time for receiver
Method for turn on/off the receiver
FAQ
Package list
Technical Data
Precautions
.................................................01
.....................................................01
..............................01
....................................02
...........................................02
.............02
.............02
...........................................................03
................................................03
...........................................03
................................................04
EU Importer：
Name：Germany Retevis Technology GmbH
Address：Uetzenacker 29,38176 wendeburg

1
Retekess T115
Wireless Guest Paging System User Manual
Description
Features
This queue wireless calling system set consists of one 99-channel call button keypad
and 18pcs wireless pagers. It adopts RF wireless technology with millions of different
learning codes, can easily pair up to 99 channels of pagers. While the customer places
an order, he(she) will be dispatched one receiver with a number, when the order is
ready, press the keypad to call the number, the customer will get it through the
buzzer/vibration/LED indications.
The queue system greatly improves the working efficiency and avoids the client waiting
in a long queue, so it is widely used in fast food restaurant, food court, clinic, church,
auto shop or other queue occasions.
• 99 channel keypad call button
• Consists of one keypad +18pcs coaster pager
• Portable rechargeable vibration & buzzer pager
• High receive sensitivity
• All pager can be shut down by one key through keypad
• Waterproof and oil-proof for the keypad
• Touchable keypad
Diagram of Receiver

2
Diagram of Transmitter
Pairing method
Pairing---Press the receiver's Function key and Cancel key at the same time, now the
2 red indicators on the right side will be lighted on, input a number and press Call key
on the keypad, the receiver will vibrate and beep, that means they have paired
successfully.
Deleting---if we want to delete the receiver’s number, just pair to another number.
Adjust reminding time for receiver
Every time when press the Function key, an indicator will be lighted on, and every 7
seconds of the reminding will be lengthen. It can be lengthen to 35 seconds at most
and 2 seconds at least.
Method for turn on/off the receiver
Long press Function key can power off the receiver, and short press it can power on.
Note: if we want to power off all the receiver, just put all of them on the charging slot,
input 99 and press Call key can power off them. Also we can reconnect the
device to the power supply to power on all the receiver.

Transmitter Receiver
Dimension 600*520*35mm Dimension 105*57*11mm
Material PC Material ABS
Transmit power 480mW Receiving sensitivity -114dB
Standby power
650mW
Standby power
148mW
Maximum power 18W Li-polymer 3.7V/200mAh
Frequency
433MHz
Frequency
433MHz
Power supply DC12V/2A Receiving distance ＞900M open
area
Launch distance ＞900M open
area
Standby time ≈3 hour
Support receiver 99(18/set) Power mode Vibration/Beep/
Flashing
IP grade IP33 IP grade IP33
3
Diagram of receiver
Pairing method
Adjust reminding time for receiver
Problems Reasons Solutions
While power on, the
number display on
keypad is not on.
The power adaptor is
broken.
Change the power
adaptor.
The distance of some
receiver gets near.
The battery is low. Change the battery in
time.
Receiver can't get any
signal from keypad.
The number is not
correct.
Pair the receiver again
to the keypad.
Forget the number of
receiver.
Delete the pairing first,
then pair it again.
Name
Quantity
Receiver
18 pcs
Transmitter Keypad 1 pcs
Charger 1 pcs
User Manual 1 pcs

4
Set the Function
The first function: set only vibration without beep
Remove the plate and paper jam. You will see a small copper dot, press the copper
dot. The indicator light on the handle will light. There are 5 indicators light, when all
5 indicators light are on, press the copper again to turn off the indicator light. At this
time, press the button on the pager side, the setting is completed, this will exit the
settings mode. This setting for vibration only and no sound is completed.
The second function: set and change the transmitter base ID number
Generally, the ID number of each base is different. If you need 2 sets of products
and 2 bases to control 36 vibrating cards at the same time. It is necessary to change
the base and ID. When the IDs of the two bases are changed to be consistent, all
customers receivers can be addressed. The specific settings are as follows:
1. Power off the charging base then power-on the unit.
2. Within 5 seconds after power-on, long press the DELE and CALL buttons to enter
the setting state.
3. After entering the setting mode, the dot matrix displays the existing ID of the base,
and then sets the required ID number by pressing the number from 0 to 9.
4. Press the CALL button to save, exiting the setup mode, and changing the ID
number.

5
Warning
Local Government Regulations
When the radios are used as a consequence of employment, the Local Government
Regulations requires users to be fully aware of and able to control their exposure to
meet occupational requirements. Exposure awareness can be facilitated by the use of
a product label directing users to specific user awareness information. Your Retekess
radio has a RF Exposure Product Label. Also, your user manual, or separate safety
booklet includes information and operating instructions required to control your RF
exposure and to satisfy compliance requirements.
Compliance with RF Exposure Standards (If appropriate, Reference to
the actual product’s Safety Marking)
Your Retekess radio is designed and tested to comply with a number of national and
International standards and guidelines (listed below) for human exposure to radio
frequency electro-magnetic energy.
FCC ID
The FCC ID means: This radio complies with the IEEE (FCC) and ICNIRP exposure
limits for occupational/controlled RF exposure environments at operating duty factors
of up to 50% talk-50% listen and is approved for occupational use only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
Before using this radio, read this guide which contains
important operating instructions for safe usage and RF
energy awareness and control for compliance with
applicable standards and regulations.

6
Warning
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The CE marking means: Hereby, Henan Eshow Electronic Commerce Co.,Ltd. declares
that the radio equipment type is in compliance with the RED Directive 2014/53/EU and
the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of
the EU declaration of conformity is available at the following internet address:
www.tivdio.com
IC ID
This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions:
• This device may not cause interference, and
• This device must accept any interference, including interference that may cause
undesired operation of the device.
In terms of measuring RF energy for compliance with these exposure guidelines, your
radio generates measurable RF energy only while it is transmitting (during talking), not
when it is receiving (listening) or in standby mode.
Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Protect your hearing
• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy surroundings.
• Turn down the volume before adding headset or earpiece.
Turn off your radio power in the following conditions:
• Turn off your radio before removing (installing) a battery or accessory
or when charging obattery.
• Turn off your radio when you are in a potentially hazardous environ-
ments: Near electrical blasting caps, in a blasting area, in explosive
atmospheres (inflammable gas, dust particles, metallic powders, grain
powders, etc.).
• Turn off your radio while taking on fuel or while parked at gasoline
service stations.
WARNING
WARNING

7
Warning
To avoid electromagnetic interference and/or compatibility
conflicts
• Turn off your radio in any facility where posted notices instruct you to
do so, hospitals or health care facilities (Pacemakers, Hearing Aids
and Other Medical Devices) may be using equipment that is sensitive
to external RF energy.
• Turn off your radio when on board an aircraft. Any use of a radio
must be in accordance with applicable regulations per airline crew
instructions.
Avoid Burns
Antennas
• Do not use any portable radio that has a damaged antenna. If a
damaged antenna comes into contact with the skin when the radio is
in use, a minor burn can result.
Batteries (If appropriate)
• When the conductive material such as jewelry, keys or chains touch
exposed terminals of the batteries, may complete an electrical circuit
(short circuit the battery) and become hot to cause bodily injury such
as burns. Exercise care in handling any battery, particularly when
placing it inside a pocket, purse or other container with metal objects.
Long transmission (If appropriate)
• When the transceiver is used for long transmissions, the radiator and
chassis will become hot.
Safety Operation
Forbid
• Do not use charger outdoors or in moist environments, use only in
dry locations/conditions.
• Do not disassemble the charger, that may result in risk of electrical
shock or fire.
• Do not operate the charger if it has been broken or damaged in any
way.
• Do not place a portable radio in the area over an air bag or in the air
bag deployment area. The radio may be propelled with great force
and cause serious injury to occupants of the vehicle when the air bag
inflates.
To reduce risk
• Pull by the plug rather than the cord when disconnecting the charger.
• Unplug the charger from the AC outlet before attempting any
maintenance or cleaning.
• Contact Retekess for assistance regarding repairs and service.
WARNING
WARNING