Revo RETRT700-1 User manual

Operating Manual
USER'S INSTRUCTIONS
Model No.: RETRT700-1/RETRT2812-2
(DC 12V /AC 24V ~ 60HZ, 12W / NTSC)
REVO AMERICA
www.revoamerica.com
TEL.: [phone]-REVO(7386)

2
USER’S MANUAL

- 3 -
사 용 설 명 서USER'S MANUAL
Contents
Camera Features
Installing & Adjusting
Dimension & Specification
OSD Control Button
On Screen Dispaly (OSD) Menu
Accessing the OSD Menu Settings continued
Lens
Exposure
SSDR
White Balance
BLC
DNR3
Day/Night
Special
Image Adjust
Cam Title
Sync
Motion
Privacy
DIS
Profile
RETURN
Exit
Trouble Shooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
5
6
7
8
9
10
10
12
13
14
16
17
18
18
19
20
20
21
22
22
22
23
24

- 4 -
사 용 설 명 서
Camera Features
● Ultra High Sensitivity
The built-in high sensitivity COLOR CCD produces a clear image even in 0.0001Lux(Sens-up
x512) lower illumination.
● 700TV Lines
By adopting a diagonal 6mm(1/3") 520,000(NTSC) pixel, 610,000(PAL) pixel SONY CCD, the
camera produces clear picture quality with a horizontal resolution of 700 TV lines for color and a
horizontal resolution of 750 TV lines for BW mode.
● DNR3
The high-performance SV-V DSP chip effectively removes low-light gain noise and ghosting to
provide clear images even in dark environments.
● Day&Night
The camera has a function that automatically selects the mode that is appropriate for daytime or
night-time conditions. The COLOR mode operates in daytime conditions to provide optimum
colors, and BW mode operates in night-time conditions to enhance the definition of the image.
● SSDR
For images with high contrast between bright and dark Areas from difficult lighting conditions
such as backlighting, this camera selectively illuminates darker Areas while rataining the same
light level for brighter Areas to even out the overall brightness.
● Miscellaneous Functions
HLC(High Light Compensation), SENS-UP, FLIP(H/V-REV), D-ZOOM, SHARPNESS, MOTION
DETECTION and PRIVACY functions are provided.
● Profile
Yon can set a mode according to the camera installation conditions.
- BASIC, DAY/NIGHT, BACKLIGHT, ITS, INDOOR, USER
USER'S MANUAL

- 5 -
사 용 설 명 서
Installing & Adjusting
- Place the mounting plate on a at installation surface
and mount with the provided screws.
- Feed the cable through the center of the mounting plate.
- Place the camera body in the mounting plate socket
and hold.
- Then place the outer plate over the camera body &
mounting plate and tighten side screws to lock the
camera into place.
- Loosen side screws to adjust camera angle as needed,
then tighten the side screws to lock into place.
- To widen the viewing angle turn the Zoom screw
to "W"(Wide) to obtain a closer view turn it to
"T"(Tele).
- Turn the Focus screw to "N"(Near) or "∞"(Far)
untill the sharpest Focus is made.
1. Installation
2. Focus / Zoom Screw
USER'S MANUAL

- 6 -
사 용 설 명 서
Dimension Connection
Image Pick-Up Device
TV System
Total Pixels
Scanning Frequency
Scanning System
Synchronization
Resolution
Minimum Illumination
S/N Ratio
Video Output
Electronic Shutter Speed
OSD
White Balance
REVERSE
PIP
D-ZOOM
MOTION
Power Supply
Power Consumption
Lens
Operational Temp.
Storage Temp.
Dimension
Weight
1/3" Sony Super HAD CCD
NTSC
976(H) * 508(V)
976(H) * 494(V)
15.734KHz(H) & 59.94Hz(V)
2:1 Interlace
Internal / Line-Lock
700TVLines
IR LED OFF : 0.15Lux, IR LED ON : 0Lux
More than 52dB
CVBS: 1.0Vp-p / 75ȏ
ESC / A.FLK / MANUAL(1/60 ~ 1/120,000)
Available
ATW / OUTDOOR / INDOOR / MANUAL / AWC→SET
OFF / H-REV / V-REV / HV-REV
OFF / ON
OFF / ON(x1~x16)
OFF / ON(4 Programmable Zone)
PRIVACY OFF / ON(12 Programmable Zone)
DIS (Digital Image Stabilizadion)
OFF / ON
DC12V / AC24VnDual Voltage
DC Auto Iris Varifocal Lens
-35 ~ +50 Deg C. RH95% MAX.
-35 ~ +60 Deg C. RH95% MAX.
140mm(W) * 111mm(H) * 180mm(D)
1800g
Environmental IP66 Weatherproof
IR LED OFF 0.2A(DC), IR LED OFF 0.15A(AC)/IR LED ON 0.52A(DC), IR LED ON 0.48A(AC)
SSDR
BLC
Day & Night
AGC
SENS-UP
DNR3 (Digital Noise Reduction)
OFF / ON(Level adjustable)
BLC / HLC / OFF
EXTERN / COLOR / BW / AUTO
Special
LOW / HIGH / OFF
AUTO(x2~X512) / OFF
OFF / ON(Level adjustable)
Dimension & Specication
1. Dimension & Connection
2. Specication
WARNING : To prevent electric shock and risk re hazards, do
not use power sources other than that specied.
USER'S MANUAL

- 7 -
사 용 설 명 서
OSD Control Button
▲ Up button : Moves the cursor upwards. Use this button to select an item or adjust the parameters.
▼ Down button : Moves the cursor downwards. Use this button to select an item or adjust the
parameters.
◀ Left button : Moves the cursor to the left. Use this button to select or adjust the parameters of the
selected item. The parameter changes each time this button is pressed.
▶ Right button : Moves the cursor to the right. Use this button to select or adjust the parameters of
the selectd item. The parameter changes each time this button is pressed.
◎ Set button : Executes selections and displays a submenu for an item with the mark.
1. OSD Button could be used when it needs to OSD control.
USER'S MANUAL

- 8 -
사 용 설 명 서
On Screen Display (OSD) Menu
SETUP Menu
On Screen Display (OSD) Menu
Camera functions and settings can be adjusted or changed by activating the OSD manu.
When the OSD menu is activated text will display on the monitor. The user can then move the cursor to
the desired function to change the setting.
LENS
EXPOSURE
SSDR
WHITE BALANCE
BACKLIGHT
DNR3
DAY/NIGHT
SPECIAL
EXIT
● DC
● BRIGHTNESS
● SENS-UP
● OFF
● ATW
● MANUAL
● OFF
● OFF
● AUTO
● EXTERN
● IMAGE ADJ.
● MOTION
● PROFILE
● SAVE
● SHUTTER
● RETURN
● ON
● OUTDOOR
● ATW → SET
● USER BLC
● ON
● COLOR
● CAM TITLE
● PRIVACY
● COMM ADJ.
● NOT SAVE
● AGC
● INDOOR
● HLC
● B/W
● SYNC
● DIS
● RETURN
● RESET
USER'S MANUAL

- 9 -
사 용 설 명 서
Accessing the OSD Menu Settings continued
1. Press the SETUP button.
2. Select a menu item from the list available by using the Up and Down buttons.
3. Set up a selected item by using the Left and Right buttons.
4. To nish the settings, select 'EXIT' and press the SET button.
● Settings can now be made. The SETUP menu is displayed on the monitor.
● Functions are selected using up and down buttons.
● Place the cursor over a desired item, the selected position is displayed.
● An item with the icon also has sub menus. To select a sub menu, select an item with the
icon and press the SET button.
● An item with the - - - icon has no sub-menus available for selection.
Select the function
using the UP or
DOWN button.
When an arrow
is present, press
SETUP button to
enter sub-menu.
Change the status
using the LEFT or
RIGHT button.
MAIN SETUP
MAIN SETUP
←
←
←
←
←
←
▶
▶
1. LENS
2. EXPOSURE
3. SSDR
4. WHITE BAL
5. BACKLIGHT
6. DNR3
7. DAY/NIGHT
8. SPECIAL
9. EXIT
1. LENS
2. EXPOSURE
3. SSDR
4. WHITE BAL
5. BACKLIGHT
6. DNR3
7. DAY/NIGHT
8. SPECIAL
9. EXIT
←
←
DC
ON
ATW
OFF
ON
AUTO
SAVE
DC
ON
ATW
OFF
ON
AUTO
SAVE
←
←
☞ NOTE
←
USER'S MANUAL

- 10 -
사 용 설 명 서
Using this function, you can control the screen brightness.
1. When the SETUP menu is displayed, select 'EXPOSURE' by using the Up and Down buttons so that
the arrow indicates'EXPOSURE'. Press SETUP to enter.
▶DC : You can adjust the minimum shutter and maximum
value of shutter when DC Lens mode is selected.
■ Lens
■ Exposure
2. Press SETUP to choose from the sub menu items as listed below.
1. When the SETUP menu screen is displayed, select 'LENS' by using the Up and Down buttons so that
the arrow indicates 'LENS'.
▶ BRIGHTNESS : Adjusts the video brightness (selectable from 1 ~ 70).
▶ IRIS SPEED : Adjusts the iris control speed of the DC lens. If the control speed is too slow or fast,
use this menu to adjusts the speed.
▶ FOCUS ADJ. : Press SET to enter focus menu. Then to adjust the lens focus correctly, ensure
"MODE" is set to 'ON'. After lens focus has been adjusted, set "MODE" to 'OFF'.
● If color rolling occurs when using a DC lens, set Shutter to - - -.
● Some lenses may not work properly, depending on the setting of the BRIGHTNESS LEVEL.
MAIN SETUP
MAIN SETUP
▶
▶
1. LENS
2. EXPOSURE
3. SSDR
1. LENS
2. EXPOSURE
3. SSDR
←
←
DC
ON
DC
ON
←
←
☞ NOTE
USER'S MANUAL

- 11 -
사 용 설 명 서
2. Select the desired mode using Up and Down buttons.
▶ BRIGHTNESS : Adjusts the exposure brightness.
▶ SHUTTER : You can select either auto or manual shutter.
● A.FLK : Select this when you experience picture icker, which can happen when there is a clash
with the frequency of the installed lighting.
● ESC : Select this to control the shutter speed automatically. If ESC is selected, the shutter speed is
automatically controlled depending on the ambient illumination of the subject.
● MANUAL : You can control shutter speed manually. (1/60 ~ 1/120,000)
● - - - : Shutter speed is xed at 1/60 sec. (1/50 sec.)
▶ AGC (AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen, but the higher the
noise.
● OFF : Deactivates the AGC function.
● LOW : Allows automatic gain control from 5.3dB to 32dB.
● HIGH : Allows automatic gain control from 5.3dB to 37dB.
▶ SENS-UP : When it is night or dark, the camera automatically detects the light level and maintains a
clear picture if this mode is activated.
● OFF : Deactivates the SENS-UP function.
● AUTO : Activates the SENS-UP function.
● When using a DC lens, set the shutter mode to A.FLK if color rolling occurs.
● When the SHUTTER is set to ESC after selecting Internal Synchronization Type, the picture
may become unstable if the camera faces a bright uorescent light. Therefore, take care
when choosing the installation position.
● When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
● Set the shutter mode to - - - if color rolling occurs.
EXPOSURE SETUP
▶|||||*||||||||||||||||
1. BRIGHTNESS
2. SHUTTER
3. AGC
4. SENS-UP
5. RETURN ←
25
- - -
HIGH
OFF
☞ NOTE
▷ SHUTTER continued
LIMIT
Press SET to Return
▶AUTO X2
USER'S MANUAL

- 12 -
사 용 설 명 서
▶ RETURN : Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
1. When the SETUP menu screen is displayed, select 'SSDR' by using the Up and Down buttons so
that the arrow indicates 'SSDR'.
2. Turn on by using the Left/Right buttons ahd press SETUP to change the SSDR level in the sub menu
according to the contrast between bright and dark areas.
● If you press the SET button in 'AUTO' mode, you can adjust brightness by increasing or
decreasing the shutter speed. (x2 ~x512)
● Note that the higher the zoom level, the brighter the screen, but the more likely it is that an
after-image will appear.
● Although noise, spots and whitish symptoms may occur in SENS-UP operation when the
zoom level is increased, this is normal.
☞ NOTE
SSDR SETUP
Press SET to Return
SSDR OFF SSDR ON
▶LEVEL 8
SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even
out the overall brightness of images with high contrast between bright and dark areas.
■ SSDR (Super Dynamic Range)
MAIN SETUP
▶
1. LENS
2. EXPOSURE
3. SSDR
4. WHITE BAL
5. BACKLIGHT
←
DC
ON
ATW
OFF
←
|||||*||||||||||||||||
USER'S MANUAL

- 13 -
사 용 설 명 서
● White Balance may not work properly under the following conditions. In this case select the
AWC mode.
1. When the color temperature of the environment surrounding the subject is out of the control
range (ie. clear sky or sunset).
2. When the ambient illumination of the subject is dim.
3. If the camera id directed towards a uorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
☞ NOTE
Use the White Balance Function to adjust the screen color.
Select one of the follwing 5 modes, as appropriate for your purpose.
▶ ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.
▶ OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K.
(sodium light inclusion)
▶ INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K.
▶ MANUAL : Select this to ne-tune White Balance manually. Set White Balance rst by using the ATW
or AWC mode. After that switch to MANUAL mode, ne-tune the White Balance and then
press the SET button.
▶ AWC → SET : To ne the optimal luminance level for the current environment, point the camera
towards a sheet of white paper and press the Fuction Setup switch. If the environment
changes, readjust it.
1. When the SETUP menu screen is displayed, select 'WHITE BAL' by using the Up and Down buttons
so that the arrow indicates 'WHITE BAL'.
2. Select a desired mode using the Left and Right buttons.
■ White Balance control
MAIN SETUP
▶
1. LENS
2. EXPOSURE
3. SSDR
4. WHITE BAL
5. BACKLIGHT
←
DC
ON
ATW
OFF
←
USER'S MANUAL

- 14 -
사 용 설 명 서
2. Select a desired mode using the Left and Right buttons depending on the camera purpose.
▶ USER BLC : Enables a user to select a desired area on a picture and view that area more clearly.
● LEVEL : Adjust level of the HLC function.
● TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
▶ HLC (High Light Compensation) : If the scene contains extremely bright light areas such as from car
headlight, the light can mask out much of the on-screen detail.
Use HLC feature to remove these exceptionally bright light areas
to allow detail such as car license plate number to become visible.
● LEVEL : Adjust level of the HLC function.
● LIMIT : Enable to change the operating condition.
● MASK COLOR/TONE : Change the color / brightness of the masking area.
( Black, Red, Blue, Cyan, Magenta)
● TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Up and Down buttons
so that the arrow indicates 'BACKLIGHT'.
■ BLC (Back Light Compensation)
MAIN SETUP
▶
1. LENS
2. EXPOSURE
3. SSDR
4. WHITE BAL
5. BACKLIGHT
←
DC
ON
ATW
OFF
←
BLC SETUP
Press SET to Return
▶1. LEVEL
2. TOP
3. DOWN
4. LEFT
5. RIGHT
6. RETURN
MIDDLE
25
90
70
150
|||||*||||||||||||||||
|||||*||||||||||||||||
||||||||||||||||||*|||
||||||||||||||||*|||||
←
BLC ON BLC OFF
USER'S MANUAL

- 15 -
사 용 설 명 서
▷ HLC continued
HLC ON
HLC OFF
▶ OFF : Not being used.
3. Select a desired mode using the Left and Right buttons and press the SET button.
▶ BLC : Select 'BLC' to adjust the area to
be enhanced then adjust the level.
▶ HLC : Enable the user to change the level
limit, mask color/tone and area.
BLC SETUP
▶
LEVEL
LIMIT
MASK COLOR
MASK TONE
TOP
BOTTOM
LEFT
RIGHT
MIDDLE
NIGHT ONLY
BLACK
5
38
109
54
121
|||*|||||||||||||||||||
*||||||||||||||||||||||
*||||||||||||||||||||||
||||||||||||||||||||||*
|||||||||||||||||||*|||
BLC SETUP
Press SET to Return Press SET to Return
▶LEVEL
TOP
DOWN
LEFT
RIGHT
MIDDLE
27
82
42
126
|||||*||||||||||||||||
|||||*||||||||||||||||
||||||||||||||||||*|||
||||||||||||||||*|||||
● For effective license plate observation, it needs minimum illumination and fast shutter speed
more than 1/200 sec.
● Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
● When dark, the HLC is only activated when a bright light exceeding a specic size in NIGHT
ONLY mode.
● The HLC is not activated in day light or when bright light is not present at night in NIGHT
ONLY mode.
☞ NOTE
USER'S MANUAL
HLC SETUP
▶
1. LEVEL
2. LIMIT
3. MASK COLOR
4. MASK TONE
5. TOP
6. BOTTOM
7. LEFT
8. RIGHT
9. RETURN
MIDDLE
NIGHT ONLY
BLACK
5
10
105
10
210
|||*|||||||||||||||||||
*||||||||||||||||||||||
*||||||||||||||||||||||
||||||||||||||||||||||*
||||||||||||||||||||||*
←

- 16 -
사 용 설 명 서
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'DNR3' by using the Up and Down buttons so that
the arrow indicates 'DNR3'.
3. Set the DNR3 mode to 'ON' and press the SET button. Then you can adjust the noise reduction level.
2. Select a desired mode using the Left and Right buttons.
▶ OFF : Deactivates DNR3. Noise is not reduced.
▶ ON : Activates DNR3 so that noise is reduced.
■ DNR3
MAIN SETUP
▶
1. LENS
2. EXPOSURE
3. SSDR
4. WHITE BAL
5. BACKLIGHT
6. DNR3
←
DC
ON
ATW
OFF
ON
←
←
DNR3
Press SET to Return
▶LEVEL 15 |||||||*||||||||||||||||
● You cannot set the DNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is
'OFF'.
● When adjusting the noise reduction level in DNR3 mode, remember that the higher the level
is set, the greater the reduction in noise level, as will the brightness of the image.
☞ NOTE
USER'S MANUAL

- 17 -
사 용 설 명 서
Yon can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the Up and Down buttons
so that the arrow indicates 'DAY/NIGHT'.
2. Select a desired mode using the Left and Right buttons according to the picture display you want.
▶ EXTERN : This mode allows you to apply a desired lter to external signals.
▶ COLOR : The picture is always displayed in color.
▶ B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
▶ AUTO : The mode is switched to 'COLOR' in a normal environment, but switches to 'B/W' mode when
ambient illumination is low. To set up the switching time for AUTO mode, press the SET button.
You can turn on or off the burst signal on B/W mode.
● BURST MODE : You can turn on or off the burst signal on B/W mode.
● DURATION : You can select the brightness level at which the camera switches from day to night mode.
● DWELL TIME : You can select the duration the camera changes from day to night mode and night to
day.
■ Day/Night
MAIN SETUP
▶
1. LENS
2. EXPOSURE
3. SSDR
4. WHITE BAL
5. BACKLIGHT
6. DNR3
7. DAY/NIGHT
←
DC
ON
ATW
OFF
ON
COLOR
←
←
● When using a video Auto Iris Lens, if you set the lens level to low, automatic switching
between Colod and Black & White may not occur.
● When AGC in the EXPOSURE menu is 'OFF', '- - -' mode operates as like selecting
'COLOR' mode, and 'AUTO' mode can not be selected.
☞ NOTE
AUTO SETUP
▶
1. BURST MODE
2. COLOR→B/W
DURATION
DWELL TIME
3. B/W→COLOR
DURATION
DWELL TIME
4. RETURN
ON
FAST
5 SEC
FAST
10 SEC
←
USER'S MANUAL

- 18 -
사 용 설 명 서
1. When the SETUP menu screen is displayed, select 'SPECIAL' by using the Up and Down buttons so
that the arrow indicates 'SPECIAL'. Press SETUP to enter the 'SPECIAL' menu.
2. Select a desired mode using the Up and Down buttons.
▶ IMAGE ADJ. :
1) When the SETUP menu screen is displayed, select 'IMAGE ADJ.' by using the Up and Down buttons
so that the arrow indicates 'IMAGE ADJ.'. Press SETUP to enter 'IMAGE ADJ.'.
2) Select a desired mode using the Up and Down buttons.
■ Special
MAIN SETUP
▶
1. LENS
2. EXPOSURE
3. SSDR
4. WHITE BAL
5. BACKLIGHT
6. DNR3
7. DAY/NIGHT
8. SPECIAL
←
←
DC
ON
ATW
OFF
ON
COLOR
←
←
SPECIAL SETUP
IMAGE SETUP
▶
▶
1. IMAGE ADJ.
2. CAM TITLE
3. SYCN
1. MONITOR
2. REVERSE
3. PIP
OFF
INT
LCD
OFF
OFF
←
←
● MONITOR : Change the settings value of video that is appropriate to your monitor.
- LCD : Select this menu item when using a LCD monitor.
- CRT : Select this menu item when using a CRT monitor.
- USER : Use this menu item when using a monitor other than standard ones. You can change the
gamma, PED level, and color gain in the sub menus.
● REVERSE : You can revrse the picture.
- OFF : Picture will not be reversed.
- H-REV : Horizontal ip.
- V-REV : Vertical ip.
- HV-REV : Both Horizontal and Vertical ip.
USER'S MANUAL

- 19 -
사 용 설 명 서
● PIP (Picture-in-Picture) : Displays a full size image along with the thumbnail to provide more detailed
information. The position of the thumbnail is adjustable.
● D-ZOOM : You can use a digital zoom of x1 ~ x16.
● FONT COLOR : You can change the OSD font color.
● LANGUAGE : You can select the menu language.
- NTSC : Korean, English, French, Spanish, Japanese, Portuguese.
- PAL : English, Chinese, German, Italian, French, Spanish, Russian, Serbian, Swedish, Danish,
Turkish, Portuguese.
● SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer.
Adjust this value appropriately depending on the sharpness of the picture.
● RETURN : Select this to save the settings for the IMAGE ADJ. menu and to return to the SETUP
menu.
● When the REVERSE mode is enbled, the text on the screen will not ip.
● If you increase the SHARPNESS level too high, the picture may become distorted or noise may
appear.
☞ NOTE
▶ CAM TITLE : If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Up and Down buttons so that the arrow indicates
'CAM TITLE'.
2) Set it to 'ON' by using the Left and Right buttons.
3) Press the SET button.
4) Use the 4 direction buttons to move to a desired letter and select the letter by pressing the SET
button. Repeat this to enter multiple letters. You can enter up to 15 letters.
5) Enter a title, move the cursor to 'POS' and press the SET button. The entered title appears on the
screen. Select the position to display the title on the screen by using the 4 direction buttons and
press the SET button. When the position is determined, select 'END' and press the SET button to
return to the SPECIAL menu.
SHOP
CAMERA TITLE SETUP
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9
←→ CLR POS END
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
USER'S MANUAL

- 20 -
사 용 설 명 서
● When the CAM TITLE menu is 'OFF', on title will be displayed on the monitor screen even if you enter
one.
● Only English is available is this mode.
● If you move the cursor to CLR and press the SET button, all the letters are deleted. To edit a letter,
change the cursor to the buttom left arrow and press the SET button. Move the cursor over the letter
to be edited, move the cursor to the letter to be inserted and then press the SET button.
● When using AC power at 60Hz frequency, you can use the L/L type synchronization.
● When the power is DC 12V, or when VPS is set to ON, the SYNC menu is xed to the 'INT' mode.
☞ NOTE
☞ NOTE
▶ SYNC : In areas where the supply is at 60Hz, you can synchronize the output phase of multiple
cameras using the power synchronization function (Line-Lock) without using a
synchronization signal generator.
● INT : Internal Synchronization Type.
● L/L : Power Synchronization Type, Line-Lock.
- Press the Function Setup switch.
- You can select a desired phase from 0 to 359 when select 'PHASE'.
▶ MOTION : You can monitor activity more efcient with this feature by means of an outlined box
around moving objects, and the words 'MOTION DETECTED' appearing on screen.
● MOTION : Enable or disable the motion detection feature.
- OFF : Disables motion detection.
- DETECTION : Activates motion detection.
● DETECT BOX : Outlines an object on the screen in a box when movement matches a custom
motion type.
● ALARM OUT : Releases a signal from the MD Output Terminal of the camera when an object's
movement matches a custom motion type.
● DETECT AREA : Denes the motion detection area.
SYNC
Press SET to Return
▶PHASE 0 *|||||||||||||||||||||||
MOTION MOTION
▶▶
1. MOTION
2. DETECT BOX
3. ALARM OUT
4. DETECT AREA
1. TOP
2. BOTTOM
3. LEFT
4. RIGHT
5. RETURN
OFF
ON
OFF
1
50
1
50
←
←
←
*|||||||||||||||||||||||
*|||||||||||||||||||||||
|||||||||||||||||||||||*
|||||||||||||||||||||||*
USER'S MANUAL