Revopoint 3D Technologies Fingo S1 User manual

0
User Guide
This guide provides information about the preparation
and basic installation operations.

1
Reading Tips
1. Documentation:
(1) Items Checklist
(2) User Guide
2. For Software Installation Packages and Other Operating Instructions :
Download at www.infly3d.com
(1) Installation package of 3DModelProcess (the Model Processing Software)
(2) PLAY APP Operating Instructions
(3) Light Box manual (only for light box purchasers)
(4) Tips for using the embedded APP
3.Tips for Usage
(1) The system will update automatically. It is recommended to be updated as prompted.
(2) If the Projection Settings App has been used, please reset the projection settings to
defaults before scanning.
Warnings:
The product cannot be returned if the “VOID IF REMOVED”labels on
the device are removed.
Do not look directly at the projected light, or project the light directly at
eyes.

2
Table of Contents
Product Details.................................................................................. 3
Technical Specifications.................................................................... 4
Accessories........................................................................................ 5
External Interfaces and Functions ..................................................... 7
Scanning Volume .............................................................................. 7
Hidden Shortcuts............................................................................... 7
Alibaba Cloud Server ........................................................................ 8
Functional Interface Display............................................................. 9
Operating Instructions..................................................................... 10
3D Scanning Instructions....................................................... 10
Model Management Website ............................................... 15
Model Processing Software - 3DModelProcess............................... 16
FAQ................................................................................................. 17
Precautions for Use......................................................................... 19
Warranty Card................................................................................. 21
Certification .................................................................................... 22

3
Product Details
Scope for Scanned Objects
Note: √means scannable, means partially scannable, ×means unscannable or
unsatisfactory scanning effect.
Type
Category
Scannable
Comment
Material
Metal
(non-highly
reflective)
√
Gypsum
√
Plastic (Opaque)
√
Paper Material
√
Special
Surface
Mirror Surface
×
Highly-reflective
Surface
√
There is noise in the reflective
area; spray powder before
scanning.
Glass
×
Jade
Require opaque surface
Color
Black
√
White
√
Multiple Colors
√
Require color uniformity
The globally original portable high-accuracy
Android 3D scanner is equipped with a 7.0-inch
high-definition display, embedded computing power
and high-capacity lithium battery. It is a good helper
for industrial VR/AR color reverse modeling, 3D
portrait shooting and outdoor work. It can scan and
export 3D models without connecting to a computer.
With cloud computing and storage technologies, users
can compute, store and share 3D models on the cloud
platform. The fully automatic and simple operation
makes it easy to use for users at all ages.
A Compact, Portable
& Easy-to-Use
3D Scanner

4
Technical Specifications
Product Model
Fingo S1
CPU
RK3399
RAM
4GB
System
Android 7.1
ROM
64G/32G
Scanner Dimensions
(L)192×(W)122×(H)15(mm)
Weight
Net Weight 520g
Turntable Dimensions
φ200×50(mm)
Scanning Volume
300mm×200mm×250mm
Texture Resolution
2 to 13 Megapixels
Model Accuracy
0.1mm@450mm (scanning distance of 450mm)
Fill flash Mode
Projector light source
Scanning Speed
≤2min/circle
Scanning Computing Mode
Alibaba Cloud
Screen Resolution
7.0-inch 2K high-definition capacitive touch display
Battery
3100mAH
Data Transfer
Type-C, Blue tooth, WiFi
Projection Resolution
1920×1080
Power
5v Quick charge
Turntable Loading
≤5KG
Camera
13 megapixels (2 cameras)
Output Format
ply/stl/obj

5
Accessories
No.
Item
Picture
1
Scanner
2
Tripod
3
QuickCharge
4
TYPE-C DataCable
5
Turntable
6
TurntableAdapter13V
7
Bracket,
Calibration Board

6
8
Positioning Pad
9
BlueTack
10
Object(Sample)
11
CleaningCloth
12
UserGuide
(including Warranty Card
and Certificate)
13
Light box

7
External Interfaces and Functions
Scanning Volume
(Horizontal) Scanned object volume: (Vertical) Scanned object volume:
(H)200*(L)300*(W)250(mm) (H)300*(L)200*(W)250(mm)
Hidden Shortcuts
Swipe up from the bottom edge of the screen to find the hidden shortcuts.
①②③④⑤⑥
① Hide menu ② Volume down ③ Back to previous
④ Go to Home screen ⑤ Manage running app ⑥ Volume up
Notice: When the scanner is placed
vertically, the calibration board should
also be placed vertically.

8
Alibaba Cloud Server
Functional Interface Display
[Alibaba Cloud Server]
①The device utilizes Alibaba Cloud Server to process the data.
②Log in via a user name and a password, or via email and the verification code.
③Log in the model management page through www.infly3d.com.

9
Functional Interface Display

10
Operating Instructions
3D Scanning Instructions
Step one: Tap SCANNER
Step two: Login
1) Log in with user name or email address.

11
Step three: Installation and layout
1) Place the scanner onto the tripod.
2) Place the scanner and the turntable on the positioning pad; put the
calibration board / scanned object at the center of the turntable.
3) Connect the turntable to a power outlet and switch it on.
Step four: Bind the turntable
(After binding the scanner to the turntable, the system will automatically pair
the scanner with the bound turntable.)

12
After selecting “Fixed scan”, the turntable needs to be matched. Check the
MAC address at the bottom of the turntable for the “Turntable Physical
Address”. Select the same MAC address displayed on the screen.
Step five：Scanning
1) Tap Fixed Scan;
2) Tap SETTING to adjust the parameters. Adjust the scanner to ensure the
calibration board is completely within the blue box. Tap Start Calibration.
If the calibration succeeds, place the object at the center of the turntable;

13
3)
Touch the object on the screen to get the best exposure of the object;
4) Tap Start Scan, the object would automatically rotate on the turntable, and a 3D
model will display after the scan finishes;
5) Export the model in ply/stl format.

14
6) Tap Free Scan to freely scan the object;
Complete the calibration process in Step 3 before this step.
Attach markers on the object before free scan;
Free scanning only scans one side of the object at a time. If the whole object
needs to be scanned, rotate the object 15-20 degrees in one direction after each
scan, and tap Scan to continue scanning. (The two scanned sides will
automatically align. The red one is the latest scanned side. Check if the two sides
have been aligned successfully. If not, tap Delete to scan again);
Refer to Step 5 for file export.

15
Model Management Website
The model management website: www.infly3d.com
It is recommended to use Google Chrome or Firefox web browser.
Login:
Log in with the registered user name and password or Email and the verification
code to check all scanned models in Alibaba Cloud Server.
【 Notice 】
1 ） All models scanned by the device under Alibaba Cloud Server are stored
in the Model Management Page.
2 ） If the models are deleted in the device, the web page still retains them.

16
Model Processing Software - 3DModelProcess
Download the software at www.infly3d.com
1.Click the drop-down button beside the Model button to select the channel to import
model.
Import models
Local Models Ali cloud Models
2.Model processing mode: it supports single model and multi-model processing.
Switch between the two processing modes by clicking Process or Fusion at the bottom of
the menu bar:
3.Export formats: ply/obj/stl/zx3d
Please refer to the descriptions at the bottom of the operation page for specific
instructions.

17
Appendix
FAQ
Q: Tip: “Calibration failure，please try it again”.
A:①Check whether the scanner and the turntable are placed correctly on the
positioning pad;
②Ensure the calibration board is placed in the center of the turntable；
③Confirm that the calibration board is completely displayed in the
calibration box on the screen.
Please calibrate again after finishing the above steps.
Q：After tapping Scan, it displays “Unable to connect to the network，
please Check the network connection！”
A：Please check the WIFI connection.
Q：It displays “Please calibrate again and ensure that the calibration board
faces to the scanner and the device is stable”.
A：When scanning, make sure that the desktop is not shaking and the device is
not moved，and there is no complex light source around；please try again.
Q：It displays “Uploading timeout，please enter model list to upload”.
A：If uploading takes more than 3 mins，it’s recommended to check the network
and enter the list to upload model.
Q: The turntable fails to rotate or it fails to enter the scanning page when
scanning.
A: Please check whether the turntable is on, if it still doesn’t work,
please restart the turntable and the software.
Q: Device overheat.
A: It is normal that the device will heat up after continuous scanning or
video-playing for 1 to 2 hours. Please shut down the device for a 10-minute
break.

18
Q: Fuzzy projection.
A: Wipe the front lens with the cleaning cloth.
Q: Noise can be seen in the scanned model.
A: When scanning, make sure the object to be scanned, the scanner and the
turntable are not moved. No other objects should be placed within 300 mm
around the turntable, and there should be no movable light source or reflective
objects behind the turntable.
Note: If your problems are still not solved. Please tap: Help- > Fault
Diagnosis. We will help you to analyze and fix the problems.

19
Precautions for Use
1. Please use the device indoor at the temperature of -10°~35°. The scanning effect
would be better under dark light.
2. Do not dismantle or modify the device.
3. Please do not use the device in where there is dust or cigarette smoke.
4. It is normal that the device automatically powers off due to overheat after
continuous and long-time scanning or projection.
5. Do not wet it by exposure to liquid such as fresh water, sea water, milk, soda or
soap water.
6. Do not use or store the device in extremely high temperature environment, such
as putting it near fire or heater. Please don’t use it in areas with poor ventilation,
for example cover it in quilt/blanket.
7. Do not hit the device fiercely. Do not hammer it, pile up heavy objects on it,
step on it or drop it down.
8. Do not touch or poke the connector.
9. We are exempt from liabilities for any damages or losses caused by this product
or any claims for compensation proposed by a third party.
10. Please place the device on the tripod and use it on stable or flat surface.
11. We are not responsible or liable for any property or profit losses, and claims
for compensation proposed by a third party arising from the usage of this product.
12. In case of any faults, please stop using the device and contact your local
distributor or authorized maintenance agent.