RGBlink CP 3072S User manual

CP 3072S Quick Start
VIEWSIZE THE WORLD
4 channels, 16 signal sources
Preview and program outputs separately
PIP between any two inputs
Seamless switching between any two channels
Seamless switching between PIPs
Operation of T-BAR to realize the seamless
switching of video signals
Support the multi-layers preview
Support the preview edition
Support DSK between any two channels
Support blend between any two channels

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
1
CONTENT
Product Introduction...............................................................................................................................2
Packing Configuration............................................................................................................................3
Hardware Orientation..............................................................................................................................4
Front Panel.........................................................................................................................................4
Back Panel .........................................................................................................................................9
Operating Instruction............................................................................................................................10
Content.............................................................................................................................................10
How to Change the Transition Effects ......................................................................................11
How to Choose the Output Format...........................................................................................11
How to Edit the Channel Signal................................................................................................12
How to Realize Single Image Switching...................................................................................12
How to Scale the Image............................................................................................................13
How to Crop the Image.............................................................................................................13
How to Set the Position of the Image.......................................................................................13
How to Set up the PIP...............................................................................................................13
How to Use Black Out...............................................................................................................14
How to Realize the BLEND Setting ..........................................................................................15
How to Realize the DSK Setting...............................................................................................15
How to Save the Parameter......................................................................................................15
How to Load the Saved Parameter...........................................................................................16
Contact Information...............................................................................................................................17

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
2
Product Introduction
CP 3072S is a multiviewer and presentation
mixer with multi-layers preview function that
support analog and digital video graphics to be
mixed together and seamlessly switched to
program outputs. User can realize the switching
effects by using the interactive control panel,
including the buttons, knobs, T-BAR, slider
control, OLED panel, the indicator light etc.
System Connection
RGBlink offers solutions to
demanding technical problems.
Any application questions, or
required further information, please
contact with our
customer Support Engineers.
CP 3072 System Connection Diagram
The CP 3072S supports the multi-layers preview,
preview edit, and realize the audio and video sync
control. Quick function control and processional
appearance make CP 3072S the preferred
introductory proAV switcher for application
including stage performance, broadcasting and
TV.
CP 3072S System Connection Diagram

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
3
Packing Configuration
Note: Chinese Standard,American Standard or European Standard power cord is option.
The parts bag contains 1 PVC bag, 1 CP 3072S silkscreen, 1 standard screwdriver, 2 blank key
caps and 2 T-bar gasket.
Power Cord
USB Cable
Certification
HDMI to DVI
Cable
DVI 转HDMI 线
防静电袋
Parts Bag
USB Disk

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
4
Hardware Orientation
Front Panel
Panel Instruction
1
PVW out area
7
Output format setting area
2
Save/Load area
8
Lock top panel area
3
Function edit area
9
Transition time control area
4
Input sources edit area
10
T-bar control area
5
DSK, BLEND and PIP area
11
Auto take button
6
Effects operation area

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
5
1. PVW Out Area
2. Save/Load Area
3. Function Edit Area
Button Instruction
INPUTS
4 layers preview signal
PGM
Program output signal
PST
Preview edit signal
Button Instruction
LOAD
Load button
PAGE
Total 4 pages, use for save and load
SAVE
Save button
1~4
Number button, use for save and load
Button Instruction
BRIGHT
Brightness adjustment button
MENU
Menu button
POS
Position adjustment button
ENTER
Confirm button
CROP
Crop button
OLED Panel
Show operation menu items
SCALE
Scale button
Knob
Confirm and adjust OLED menu

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
6
4. Input Source Edit Area
5. DSK, BLEND and PIP Area
Button Instruction
CVBS
CVBS signal source button
SDI
SDI signal source button
VGA
VGA signal source button
LED Light
The light is on if there is PGM out, and
is off if there is no PGM out.
HDMI
HDMI signal source button
1~4
Channel signal source button and
number button
USB
USB signal source button
BLACK
Black button
Button Instruction
DSK
DSK effect button
PIP layout shortcut button: PIP L+T
Key level knob
Alpha adjustment knob
PIP layout shortcut button: PIP R+T
BLEND
BLEND effect button
PIP layout shortcut button: PIP L+B
Blend knob
Blend width adjustment knob
PIP layout shortcut button: PIP R+B
PIP
Single and double image
switch button

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
7
6. Effects Operation Area
7. Output Format Setting Area
8. Lock Top Panel Area
Button Instruction
←□→, →□←, ←＋→, →＋←,
←0→
CUT
L→R, L←R, T→B, B→T, III→
FADE
L←M→R, T←M→B, LT→RB
Button Instruction
FORMAT
Output format button
HD
HD output format indicator
SD
SD output format indicator
RGB
RGB output format indicator
Button Instruction
LOCK
Lock top panel button

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
8
9. Transition Time Control Area
10. T-bar Control Area
11. Auto Switch Button
Button Instruction
OLED Panel
Show transition time
Knob
Adjust transition time
Button Instruction
T-bar
Switch effects mode manually
Button Instruction
TAKE
Preview seamless effect switch button

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
9
Back Panel
Input Interface
1.5.9.13
USB input USB-B port
2.6.10.14
CVBS input BNC port
3.7.11.15
HDMI input HDMI-A port (Only
for CP 3072), or 3G-SDI input
BNC port (Only for CP 3072S)
4.8.12.16
VGA input DB15 port
23.25
Audio input port
Other Interface
17
Switch
18
Power IEC-3
19
Dial Switch
20
USB Interface
21.22
RS-232 Interface
24
TALLY light
Output Interface
27
HDMI program output HDMI-A
29
VGA program output DB15
31
CVBS program output BNC
26
HDMI preview output HDMI-A
28
VGA preview output DB15
30
HDMI PVW output HDMI-A