RGBlink G3 NET 2K User manual

G3 NET 2K Quick Start
VIEWSIZE THE WORLD
LED Display
Seamless Switching
Instant TAKE
Built-in Monitoring
Preview Output
PIP, Scale and Map
Test Patterns
Art-Net On Board
EDID management
Direct LED Connection

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
1
CONTENT
Product Introduction ...................................................................................................................................2
Packing Configuration ..................................................................................................................................3
Hardware Orientation..................................................................................................................................4
Front Panel........................................................................................................................................................4
Back Panel.........................................................................................................................................................6
Using Your Product ...................................................................................................................................... 7
Menu Structure.................................................................................................................................................7
Set the Output Resolution ................................................................................................................................8
Select the Output Resolution....................................................................................................................8
Custom the Output Resolution .................................................................................................................8
Using Front Panel ............................................................................................................................................11
PIP Setting.......................................................................................................................................................12
Scale the Image...............................................................................................................................................13
Zoom the Image..............................................................................................................................................16
Custom TP Button ...........................................................................................................................................18
Set the LED Display Connection ......................................................................................................................20
Regular ....................................................................................................................................................20
Unregular ................................................................................................................................................26
Saving Views ...................................................................................................................................................45
Recall Saved Settings.......................................................................................................................................46
Contact Information................................................................................................................................... 47

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
2
Product Introduction
Truly bringing together integrated video control for LED displays, G3 NET is not only a LED display controller a
video scaler and switcher, but enables full remote control and automation via the industry standard Art-Net
protocol.
With Art-Net, G3 NET can be controlled from lighting controllers and any device providing Art-Net control.
Art-Net networks can be widely distributed over an IP network infrastructure. RGBlink has implemented and
extensive feature set with DMX512 channels to control source switching, scaling, and on board LED Sender Card
features directly.
In multi device applications, lighting, media servers, video switching and LED Display can be controlled as one
system in a coordinated way.
System Connection
RGBlink offers solutions to demanding
technical problems. Any application
questions, or required further
information, please contact with our
customer Support Engineers.
G3 NET 2K System Connection Diagram

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
3
Packing Configuration
DVI Cable
Antistatic Bag
QC Declaration
DVI 转HDMI 线
防静电袋

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
4
Hardware Orientation
Front Panel
Display
1
OLED Display
Displays current status of the product, and for feature selections provides interactive
choices in conjunction with buttons on the front panel.
8
LCD Display
Displays the video, for preview.
Multi-Function Buttons
2
Rotary Button
This button used for menu selections and confirmation.
The button is both rotary (turn to left and right), and push-button (confirm selection)
Illuminated Buttons
3
MENU Button
This button used for menu selections.
Push the button again will return to the last level menu or exit the menu.
4
SCALE Button
This button used for size and position adjusting.
5
PIP Button
This button used for single and double image switching.
6
MAP Button
This button used for sender card controlling.
7
TAKE Button
This button used for seamless effect switching.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
5
13
BLACK/TP Button
Black and TP reused button.
9
REMOTE Interface
This interface used for sender card controlling.
10.11.12
Dedicated Signal Buttons
For each of inputs on the back panel a dedicated backlit buttons are provided. When
lit, the signal is selected for use, when red light is flashing, signal is in preview or the
signal is not available.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
6
Back Panel
Input Connectors
1
HDMI Input HDMI-A Port
2
DVI Input DVI-I Port
3
SDI Input BNC Port
Preview Output Connectors
4
DVI Output DVI-I Port
Control Connectors
5
USB port USB-B
6. 7
Serial port RJ45
8
ART-NET IN port RJ45
9
ART-NET LINK port RJ45
10. 11. 12. 13
Ethernet port RJ45
Power Connection
14
Main power input AC 85-264V, 50/60HZ, Max 35W, Neutrik.

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
7
Using Your Product
Menu Structure
The menu structure is shown in the figure below:

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
8
Set the Output Resolution
Select the Output Resolution
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob, and select <OUTPUT>:
2. Push the knob to confirm, and enter to the menu items as follows:
3. Default <Output Format> option, push the knob to confirm, and enter to the menu items as follows:
4. Default <Standard> option, push the knob to confirm. Turn the rotary knob, and select the output format
according to actual need.
Custom the Output Resolution
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob, and select <OUTPUT>:
INPUT >>
->OUTPUT >>
COLOR ADJUSTMENTS >>
SCALE >>
->Standard >>
Customized >>
Output Format
->1920×1080@60
->Output Format >>
LED Display >>

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: [phone] Fax: [phone]
Email: [email protected] http://www.rgblink.cn
9
2. Push the knob to confirm, and enter to the menu items as follows:
3. Default <Output Format> option, push the knob to confirm, and enter to the menu items as follows:
4. Turn the rotary knob, and select <Customized>, push the knob to confirm, and enter to the menu items as
follows:
5. Turn the knob on each digital position, and change the value of the digital by the digital buttons on the front
panel. For example, input 1536 as following:
Customized
->1920×1080@60
INPUT >>
->OUTPUT >>
COLOR ADJUSTMENTS >>
SCALE
->Output Format >>
LED Display >>
Standard >>
->Customized >>
Customized
*1536×
->Standard >>
Customized >>