RGC BELLA S User manual

Guarantee Terms and Conditions
Client Obligations
Your cabin will stay functional and beautiful many years if you take proper care for it.
The strips will have to be replaced when they will start to wear-out,
to sallow or to leak out water. The quality of the water in dierent countries can be reason
for additional cleaning and attention while useing the cabin.
Guarantee conditions
The Manufacturer gives 2 years of guarantee of the product.
The Manufacturer guarantees that the product will function awless during the guarantee period,
during normal use, which includes showering of human beeings.
The Manufacturer guarantees to make any necessary repairs and x any defects on the product
on its own expence in the guarantee period.
In any of the defects in the guarantee period can not be xed, the customer
reserves the right to ask the seller for the product to be replaced of for the refund of the money.
The period for xing the defects in the guarantee period is maximum 30 days from receiving the claim.
The claim must be in the written form with attached invoice or receipt
and properly stamped guarantee list, otherwise the guarantee will not be valid.
The autorised service decides if the complaint is sustained or not.
The guarantee is valid only if the product is installed by autorized person. The manufacturer is not
liablen for any accidents caused by improper installation.
Gaurantee not includes
1.Damages during transportation.
2.Damages caused by inappropriate installation or inappropriate use.
3.Dаmages caused by cleaning with inappropriate agens.
4.Damages caused by usage of the product in the inappropriate conditions.
5.Dаmages of the glass, aluminum and other parts caused by mechanical impact.
Service List
Installation Manual and Guarantee
Made In Bulgaria
BELLA S
Signature and stamp of the authorised service
Model
Date of service
Signature and stamp of the authorised service
Model
Date of service
Signature and stamp of the authorised service
Model
Date of service
Signature and stamp of the authorised service
Model
Date of service

6
Congratulations on your excellent choice and we thank you for your condence.
Model:
Date of sale:
Signature and stamp:
1. Preparation
Carefully measure the space in which you place the cabin in your bathroom (width, length and height)
to make sure that the shower cabin is tted in the space provided.
When buying a cabin, check that the package contains all the components that are in the component
list on page no. 2. Make sure that there are no damaged parts or missing parts, and immediately report
any irregularities to the seller.
Allow the shower cabin installation to be made by persons that are authorized by Royal Glass Cabins.
Only in this case will you be sure that the cabin will be installed correctly.
The warranty is invalid in case the cabin is not installed by an authorized person of Royal Glass Cabins
or a local distributor. And sellers are not responsible and do not suer the consequences caused
by the installation of the cabin by an unprofessional and unauthorized person.
Keep in mind that an expert has the task of positioning the cabin properly and aesthetically.
There are factors that inuence the aesthetic appearance of the cabin in your bathroom
when installing the cabin (unparalleled walls, uneven oor, etc.)
5. Maintenance of the cabin
Surface cleaning
The surface should be cleaned with a soft cloth with clean and lukewarm water.
You can use non-abrasive cleaners for bathroom and bathroom furniture
DON’T USE: abrasive cleaning agents for glass, alcohol, abrasive detergents, acetone,
ammonia based agents, acids and similar products in order to avoid damaging the surface.
You can use vinegar to make stack deposits, which will be more eective if you heat it a little.
Glass cleaning.
Use any type of product that is intended to clean the glass in the house.
Aluminum cleaning
Use soft materials and a soft cloth to clean the aluminum.
Do not clean the aluminum with glass cleaners, abrasive detergents, acetone, alcohol, polish, etc.
Security tips
1.Persons with serious health problems and chronic illnesses should consult a physician
before using the cabin.
2. Do not use alcohol, narcotic drugs, or other medicines before use,
and for at least half an hour after using the cabin.
3.Children are not allowed to use a shower cubicle without adult supervision.
4.Do not leave objects with open re in the shower or bathtub.
5.Do not leave electrical or electronic appliances in the cabin or near the cabin.
6. Guarantee
2. Necessary tools
1. Crosshead screwdriver
2. Flat screwdriver
3. Measuring tape
4. Spirit level
5. Sanitary silicone
6. Drill
It is lled in by the seller

19
19
11
19
19
19
19
18
18
18
18
18
18
4. Installation of the cabin
4.1. The installation starts with the positioning or leveling of the shower or other base on
which the shower cubicle is placed. Check the siphon if it works, so that no leaks occur
after installation.
4.2. Mark the position, level and place
the wall vertical proles (1) on the wall.
Drill 3 drill holes with a 6mm drum
in pre-marked positions where the proles are
and put the wall plugs (19) in the holes.
Then, using screws 4.0x40 (18), attach
the wall vertical proles (1) to the wall.
4.3.First put the bottom horizontal prole (4) and then the vertical prole (2)
in the position in the wall vertical as shown on the drawing. (Detail 1)
4.4. Place the xed glass (8) into a bottom horizontal and vertical proles.
Than put the upper horizontal prole (3) on the top of the xed glass.
4.5. Set the roller wheels (12 & 13) on the Glass door (9) as shown on the drawing.
When installing, be sure to place the appropriate wheels on the top and bottom of the glass.
12
Detail 1
12
13
13

17
17
3. Shower cabin parts4.6. Place the glass door on the upper and bottom horizontal prole.
First hang the glass door on the upper horizontal prole by placing the wheels in
the channel of the prole. Then place the wheels in the bottom horizontal prole.
Press the button on the wheel to put the wheel in the channel, as shown on the drawing
(Detail 3).
4.7. Fix the wall prole with the horizontal upper and bottom proies and vertical prole with screw
3.9x16 (17) (Detail 2). Place the stoppers (15) in the right position on the upper and bottom horizontal
proles and x with screw 3.9x16.
Fix horizontal prole with horizontal prole corners (7) using 3.5x9.5 (16) (Detail 4)
4.8. Place the water seal strip (5), the magnetic strips (9), bottom prole covering wick (14)
and the handles (10) as shown in the gure with the parts. Complete the installation by
adjusting the roller on the cabin, so that the glass door will open very easily and will not touch
the oor. Close the space between the cabin and the shower bathtub (oor) and the vertical walls
with sanitary silicone. Do not use the shower cabinet for 24 hours to dry the silicone.
1. Wall vertical prole 2 pcs
2 pcs
2 pcs
2 pcs
1 pcs
4 pcs
2 pcs
2 pcs
2 pcs
1 set
2. Vertical prole
3. Horizontal upper prole
4. Horizontal bottom prole
5. Fix glass xing seal
6. Water seal stripe
7. Horizontal proles corner
8. Fix Glass
9. Glass Door
10. Magnet stripe
11. Handles 1 set
4 pcs
4 pcs
2 pcs
8 pcs
4 pcs
18 pcs
10 pcs
6 pcs
6 pcs
12. Upper Roller wheels
13. Bottom Roller wheels
14. Bottom prole cover wick
15. Brake - Stopper
16. Screw 3.5 x 9.5
17. Screw 3.9 x 16
18. Screw 4.0 x 40
19. Wall plug 6 x 30
20. Screw Caps
Detail 4Detail 3Detail 2
13
4
15
16
7
11
23
44
11
9 88 9
11
52 35
55
66 7
7
10
12
1414