RH Baby&child ARLO WIDE DRESSER TOPPER User manual

ARLO WIDE DRESSER TOPPER INSTRUCTIONS
WARNING :
FALL HAZARD - To prevent death or serious injury from falls, always keep child within arm's reach.
NEVER LEAVE CHILD UNATTENDED and always use restraining system.
This changing table is intended for use with children weighing up to 30 pounds.
ARLO WIDE DRESSER TOPPER will be used with ARLO WIDE DRESSER (sold separately)
with size 56"W x 19"D x 33"H. Cushion pad size is 56"L x 17-5/8"W x 3"H.
Do not use the ARLO WIDE DRESSER or ARLO WIDE DRESSER TOPPER if damaged or broken.
Customer Service
- If you are missing parts or have any questions about this product, please contact us at : 1-800-762-1751
IMPORTANT SAFETY INSTRUCTIONS :
Please read all instructions before use of the Dresser or Topper. For your safety, assembly by two or more adults is
recommended. Keep instructions for future use.
PRE-ASSEMBLY :
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
Remove all parts and hardware from the box and lay out on a carpeted or scratch-free work surface.
The shipping box provides an ideal work surface. Do not dispose of any contents until assembly is completed to avoid
accidentally discarding small parts or hardware.
Use the parts on the hardware list to identify and separate each of the pieces included prior to starting assembly.
Note: Do not fully tighten the screws until all parts are in place. Failure to follow these instructions may cause the
screws to misalign during assembly.
If using power tools to aid in assembly please use caution. Power tools can damage hardware or split wood.
Page 1 of 2

PARTS INCLUDED:
A [1] WIDE DRESSER TOPPER
B [1] WIDE DRESSER
TOOLS NEEDED:
Phillips head screwdrive ( not included)
1
2
B
A
Metal brackets
8 pcs.
2 pcs.
Screws 7x15 mm
NO. ITEM DESCRIPTION QT Y.
ASSEMBLY INSTRUCTIONS:
1. To connect ARLO WIDE DRESSER TOPPER (A) to ARLO
WIDE DRESSER (B), place Metal Brackets (2) over the pre-
drilled holes on back of topper and secure to dresser
with Screws (1).
2. The adjustable levelers should be used when the object
is placed on an uneven floor.
CARE INSTRUCTIONS:
1. Dust often using a clean, soft, dry lint-free cloth.
2. Blot spills immediately, and wipe with a clean,
damp cloth.
3. We do not recommend the use of chemical
cleansers, abrasives, or furniture polish on our
lacquered finish.
Can be adjusted
by using Levelers.
Page 2 of 2
1
2
2x
Phillips head screwdrive
( not included)
ARLO WIDE DRESSER TOPPER INSTRUCTIONS