RH Baby&child ASHBY 0313-10 User manual

ASHBY CONVERSION CRIB TODDLER BED KIT
Page 1 of 13
Made in Vietnam
Model No: 0313 - 10
Distributed in the U.S.A by:
RH Baby&Child
2900 N MACARTHUR DRIVE
TRACY, CA 95376
www.rhbabyandchild.com
Distributed in Canada by:
RH Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia
V6E4N7
WARNING: Read all
Instructions before assembling
this product.
KEEP INSTRUCTIONS FOR
FUTURE USE.
CUSTOMER SERVICE
If you are missing partsor have any questions about this product, contact us first. You can also order parts by writing to
the address above. Include the product model number, color, and a brief descriptionof the part.Or call 1-800-762-1751.
CARE AND CLEANING
TOOLS AND INSTALLATION
Tools needed: Key Wrench (included).
Two people are recommended for assembly.
When inserting bolts, turn clockwise until tight. Then loosen 1/2 - 3/4 of aturn. After bed is completely assembled,
return to each bolt and tighten.
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.If the crib is to be stored, store in a cool,
dry place and carefully package all original hardware to protect from loss.

Page 2 of 13
ASHBY CONVERSION CRIB TODDLER BED KIT
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and the assembly instructions could result in
serious injury or death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes may strangle
a child.
The mattress intended for use on the bed shall be a full-size crib mattress having
minimum dimensions of 51 5/8 inches (1310mm) in length, 27 1/4 inches (690mm)
in width and 4 inches (100mm) in thickness, not exceeding 6 inches (152mm) in
thickness.
If guardrails are used as the mattress containment means, guardrail(s) provided
must be used to avoid the formation of a gap between the mattress and the bed
that could cause an entrapment.
DO NOT place bed near windows where cords from blinds or drapes may strangle
a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as
hood strings or pacifier cords.
A child using the toddler or day bed shall be at least 15 months of age and shall
not weigh more than 50 lbs (22.7kg).
WARNING: ENTRAPMENT/ STRANGULATION HAZARD

Page 3 of 13
ASHBY CONVERSION CRIB TODDLER BED KIT
A
B
C
D
E
[1]
[1]
[1]
[1]
[1]
HEADBOARD
FOOTBOARD
LEFT SIDE RAIL
RIGHT SIDE RAIL
MATTRESS SUPPORT
PARTS INCLUDED:
F[1] TODDLER RAIL
F
A
C
B
D
E
CRIB (Sold separately)
HARDWARE INCLUDED:
8
9
10
11
12
NO. ITEM DESCRIPTIONQTY.
4 pcs.
4 pcs.
Connecting Bolt
Camlock Wheel
Allen Key 5mm
Small bolt 8mm x 3/4"
1 pc.
Allen Key 4mm 1 pc.
2 pcs.

ASSEMBLY INSTRUCTIONS
Note: - Bed must be assembled by at least two people.
- Please read instructions carefully before assembling bed.
- Use the above parts and fittings list to identify each component.
- Keep all packing materials until assembly is complete to avoid loss of smaller parts.
- Do not completely tighten all bolts until all steps are finished.
Page 4 of 13
ASHBY CONVERSION CRIB TODDLER BED KIT
HARDWARE INCLUDED (FROM CRIB):
1
2
3
4
5
Long Bolts 5/16” x 2-3/4” 4 pcs.
Insert Head 6mm
4 pcs.
4 pcs.
NO. ITEM DESCRIPTIONQTY.
4 pcs.
4 pcs.
Connecting Bolt
Camlock Wheel
L Pin 6mm

Page 5 of 13
ASHBY CONVERSION CRIB TODDLER BED KIT
STEP 1:
1
12
A
DA
C
Remove Headboard (A) from the crib by carefully
unscrew and remove the 4 Long Bolts (1) with
spring washer on back of the Headboard (A)
using Allen Key (12).

Page 6 of 13
ASHBY CONVERSION CRIB TODDLER BED KIT
EE
STEP 2:
Remove Mattress Support (E) from the crib
by carefully unscrew and remove the 4 Insert
Head (3) on top of the Mattress Support (E)
using Allen Key (12).
3
12
E

Page 7 of 13
ASHBY CONVERSION CRIB TODDLER BED KIT
STEP 3:
Remove the Footboard (B) from the crib by
carefully unscrew and remove the 4 Camlock
Wheel (5) from assembling insert onthe
Footboard (B), and using Allen Key (11).
5
4
B
11
D
C
B
4

Page 8 of 13
ASHBY CONVERSION CRIB TODDLER BED KIT
D
4
C
STEP 4:
Unscrew the Connecting Bolts (4) from the Left/Right
Side Rails (C, D). Then insert the new Connecting
Bolts (8) to the Left/Right Side Rails (C, D).
D
8
C

Page 9 of 13
ASHBY CONVERSION CRIB TODDLER BED KIT
STEP 5:
D
C
F
8
Secure the Left/Right Side Rails (C, D )
to the Toddler Rail (F), aligning the
Connecting Bolt (8) to the hole of the
assembling insert on the Toddler Rail (F).

Page 10 of 13
ASHBY CONVERSION CRIB TODDLER BED KIT
STEP 6:
STEP 7:
9
11
2
If Mattress Support (E) is not in the lowest position.
Please, move L Pin (2) it to the lowest position.
NOTE: THE MATTRESS SUPPORT (E) SHOULD BE AT
THE HIGHEST LEVEL WHEN THE CHILD IS BORN. IT
MUST BE AT THE LOWEST LEVEL BEFORE THE CHILD
CAN STAND UP. BEFORE INSTALLING THE MATTRESS
SUPPORT (E), PLEASE ASK THE CUSTOMER AT
WHICH HEIGHT THEY WANT IT INSTALLED.
Highest level
Lowest level
Middle level
C
D
Inserting Camlock Wheel (9) into assembling
insert on the Toddler Rail (F) and twist to tighten
by counter clockwise direction using Allen Key (11).