RH Baby&child BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED... User manual

Made in Vietnam
Model No: 195 - 32
Distributed in the U.S.A by:
RH Baby & Child
11640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
Page 1 of 13
BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED KIT
WARNING: Read all
Instructions before assembling
this product.
KEEP INSTRUCTIONS FOR
FUTURE USE.
1. Read all instructions before assembly crib. Keep instructions for future use.
2. Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
3. Infants can suffocate in gaps between crib sides and a mattress that is too small.
CUSTOMER SERVICE
If you are missing partsor have any questions about this product, contact us first. You can also order parts by writing to
the address above. Include the product model number, color, and a brief descriptionof the part.Call 1-800-762-1751.
CARE AND CLEANING
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included).
NOTE: It may be easier to assemble productwith two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of aturn. After crib is completely assembled,
return to each bolt and tighten.
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.If the crib is to be stored, store in a cool
dry place andcarefully package all original hardware to protect from loss.

Page 2 of 13
BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED KIT
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and the assembly instructions could result in serious
injury or death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes may strangle a child.
The mattress intended for use on the bed must be a full-size crib mattress having minimum dimensions
of 51 5/8 inches (1310 mm) in length, 27 1/4 inches (690mm) in width and 4 inches (100mm) in
thickness, not exceeding 6 inches (152mm) in thickness.
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to avoid
the formation of a gap between the mattress and the bed that could cause an entrapment.
DO NOT place bed near windows where cords from blinds or drapes may strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings or
pacifier cords.
A child using the toddler or day bed must be at least 15 months of age and must not weigh more than
50 lbs (22.7kg).
TO reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.
TO help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on
loose fasteners.
Cords. Do not suspend strings over a crib or attach strings to toys.
When child is able to pull to a standing position, set mattress to lowest position and remove bumper
pads, large toys and other objects that could server as steps for climbing out.
Stop using crib when child begins to climb out or reaches the height of 35 inches (89cm).
Check this product for damaged hardware, loose joints, loose bolts or other assembly and frequently
during use Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing,
damaged or broken. Contact(insert manufacturer’s name) for replacement parts and instructional
literature if needed.
DO NOT substitute parts.
If refinishing, use a non-toxic finish specified for children’s products.
Follow warnings on all products in a crib.
WARNING: ENTRAPMENT/STRANGULATION HAZARD

Page 3 of 13
A
B
C
D
E
F
[1]
[1]
[1]
[1]
[1]
[2]
HEADBOARD
FOOTBOARD
LEFT SIDE RAIL
RIGHT SIDE RAIL
MATTRESS SUPPORT
STRETCHER BAR
PARTS INCLUDED:
G[1] TODDLER RAIL A
C
BD
E
F
CRIB (SOLD SEPARATELY):
BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED KIT
G
NO. ITEM DESCRIPTIONQTY.
Allen Key 4mm
Long Bolts 5/16”x 2-1/2”2 pcs.
Half Moon Washer
28 x 14.5 x 7.5mm 2 pcs.
1 pc.
HARDWARE INCLUDED:
17
18
19

Page 4 of 13
HARDWARE INCLUDED (FROM CRIB):
1
2
3
4
12 mm
5
6
4 pcs.
Threaded Rod
5/16”x 2-1/2”
2 pcs.
4 pcs.
NO. ITEM DESCRIPTIONQTY.
4 pcs.
4 pcs.
1 pc.
Curved Slotted Washer
5/16" x 30 x 15 x 3mm
Hex Nut
5/16"x 12 x 12mm
Hex Wrench 12mm
Small Bolts 1/4”x 3/4”
Metal Bracket
7
8
9
10
11
Allen Key 4mm
Long Bolts 5/16”x 2-1/2”6 pcs.
Short Bolts 6 x 32mm 12 pcs.
Middle Bolts 6 x 40mm 4 pcs.
Hex Nut 6 x 10mm 16 pcs.
1 pc.
BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED KIT

ASSEMBLY INSTRUCTIONS
Note: - Bed must be assembled by at least two people.
- Please read instructions carefully before assembling bed.
- Use the above parts and fittings list to identify each component.
- Keep all packing materials until assembly is complete to avoid loss of smaller parts.
- Do not completely tighten all bolts until all steps are finished.
Page 5 of 13
12
13
NO. ITEM DESCRIPTIONQTY.
Spring Washer 1/4”x 10mm 4 pcs.
Flat Washer 1/4”x 16mm 4 pcs.
14 Cap Nut 6 x 10mm 16 pcs.
15 Half Moon Washer
28 x 14.5 x 7.5mm 4 pcs.
10 mm
16 1 pc.
Hex Wrench 10mm
BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED KIT
STEP 1:
Place the Crib down on a flat and smooth surface.

Page 6 of 13
BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED KIT
STEP 2:
Carefully unscrew and remove the 4 Long
bolts (8) with Half Moon Washer (15) on
the Stretcher Bars (F) using Allen Key (17).
Remove the Mattress Support (E) from the
crib.
17
F
E
8
15

Page 7 of 13
BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED KIT
STEP 3:
Then, remove the 4 Hex nuts (5) with Curved
Slotted Washer (4) on the Left/Right Side
Rails (C, D) using Hex Wrench (6).
STEP 4:
8
17
6
D
C
5
4
Remove the 4 Long Bolts (8) on back of
the Headboard (A) using Allen Key (17).

Page 8 of 13
BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED KIT
A
STEP 6:
6
5
4
3
C
B
B
D
7
1
STEP 5:
Remove the Headboard (A) from the crib.
Remove the Footboard (B) from the crib by
carefully unscrew and remove the 2 Small
bolts (1) and 2 Hex nuts (5) with Curved
Slotted Washer (4) on the Footboard (B).

Page 9 of 13
BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED KIT
STEP 7:
2
C
D
7
1
3
G
C
D
17
19
18
Remove Metal Bracket (2) from the Left/Right
Side Rails (C, D) by unscrew and remove the
Small Bolt (1) with Allen Key (7).
Next, removing the Threaded Rod (3) from the
post of the Left/Right Side Rails (C, D).
STEP 8:
Place the hooks of the Toddle Rail (G) into
the slots in the Left/Right Side Rails (C, D).
If ecessary, using a thick magazine or book
to protect the Toddle Rail (G), hammer with
a mallet or hammer until tight.
Then, insert Long Bolt (18), Half moon
Washer (19) with Allen Key (17) to tighten.

Page 10 of 13
BELLE UPHOLSTERED CONVERSION CRIB TODDLER BED KIT
STEP 9:
STEP 10:
Attach the Headboard (A) to the
Left/Right Side Rails (C,D ) using
Long Bolt (8) and tighten with
Allen key (17).
8
17
6
5
4
3
Attach the Left/Right Side Rails (C, D) to
the Headboard (A) by inserting Curved
Slotted Washer (4), Hex Nut (5) and using
Hex Wrench (6) to tighten