RH Baby&child JEUNE FRENCH 1079-14 User manual

Page 1 of 8
JEUNE FRENCH CONTEMPORARY UPHOLSTERED CRIB TODDLER BED KIT – ASSEMBLY INSTRUCTIONS
Model No: 1079 - 14
Made in Vietnam
Distributed in the U.S.A. by:
RH Baby & Child
2900 N MACARTHUR DRIVE
TRACY, CA 95376
www.rhbabyandchild.com
Distributed in Canada by:
RH Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
WARNING: Read all
instructions before assembling
this product.
KEEP INSTRUCTIONS FOR
FUTURE USE.
CUSTOMER SERVICE
If you are missing partsor have any questions about this product, contact us first. You can also order parts by writing to
the address above. Include the product model number, color, and a brief descriptionof the part.Or call 1-800-762-1751.
CARE AND CLEANING
TOOLS AND INSTALLATION
Tools needed: key wrench (included)
Two people are recommended for assembly.
When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of aturn. After bed is completely assembled,
return to each bolt and tighten.
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.If the crib is to be stored, store in a cool,
dry place and carefully package all original hardware to protect from loss.

Page 2 of 8
JEUNE FRENCH CONTEMPORARY UPHOLSTERED CRIB TODDLER BED KIT – ASSEMBLY INSTRUCTIONS
Model No: 1079 - 14
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and the assembly instructions could result in
serious injury or death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes may strangle
a child.
The bed is designed for a full-size crib mattress having minimum dimensions
of 51 5/8 inches (1310 mm) in length, 27 1/4 inches (690 mm) in width and
4 inches (100 mm) in thickness, not exceeding 6 inches (152 mm) in thickness.
If guardrails are used as the mattress containment means, guardrail(s)
provided must be used to avoid the formation of a gap between the
mattress and the bed which could cause an entrapment.
DO NOT place items with a string, cord, or ribbon around a child's neck,
such as hood strings or pacifier cords.
A child using the toddler bed must be at least 15 months of age and not weigh
50 lbs (22.7 kg) or less.
WARNING: ENTRAPMENT/STRANGULATION HAZARD

Page 3 of 8
JEUNE FRENCH CONTEMPORARY UPHOLSTERED CRIB TODDLER BED KIT – ASSEMBLY INSTRUCTIONS
Model No: 1079 - 14
CRIB (sold separately)
PARTS INCLUDED:
D [1] TODDLER RAIL
D
A
A
B
C
B
2 pieces
Short Bolts 5/16"x 3/4"
HARDWARE INCLUDED:
8
9
10
NO. ITEM DESCRIPTIONQTY.
1 piece
Allen Key 4mm
2 pieces
Medium Bolts 5/16" x 2"
Long Bolts 5/16" x 2 3/4"
2 pieces
11 2 pieces
Half Moon Washers
12

Page 4 of 8
ASSEMBLY INSTRUCTIONS
JEUNE FRENCH CONTEMPORARY UPHOLSTERED CRIB TODDLER BED KIT – ASSEMBLY INSTRUCTIONS
Model No: 1079 - 14
B
Remove the two Medium Bolts (5) with spring
washer on left and right sides of the Stationary Side
Rail (B) using Allen Key (8).
STEP 1:
5
8
HARDWARE INC LUDED (FROMCRI B) :
1
3
4
4 pieces
NO. ITEM DESCRIPTIONQTY.
4 pieces
1 piece
Insert Heads 6mm
L Pins 6mm
Allen Key 6mm
Long Bolts 5/16" x 2 3/4"
2 pieces
62 pieces
Half Moon Washers
7
52 pieces
Medium Bolts 5/16" x 2"

Page 5 of 8
JEUNE FRENCH CONTEMPORARY UPHOLSTERED CRIB TODDLER BED KIT – ASSEMBLY INSTRUCTIONS
Model No: 1079 - 14
B
B
STEP 2:
67
8
B
Place the crib on its side on a soft, flat surface.
Carefully unscrew and remove the two Long
Bolts (7) with Half Moon Washer (6) on left and
right sides of the Stationary Side Rail (B)
using Allen Key (8).
Remove Stationary Side Rail (B) from the crib.
If mattress support is not in the lowest position, remove all
tightened Insert Heads (3) and L Pins (4) from the Mattress
Support (C), then move it to the lowest position.
STEP 3:
Note: The Mattress Support (C) must be at the
lowest level for a toddler bed.
C
C
4
3
1

Page 6 of 8
JEUNE FRENCH CONTEMPORARY UPHOLSTERED CRIB TODDLER BED KIT – ASSEMBLY INSTRUCTIONS
Model No: 1079 - 14
Move L Pins (4) into the lowest pre-drilled
holes on the headboard and footboard (A).
Attach Insert Heads (3) to L Pins (4) and
tightened with Allen Key (1).
STEP 4:
C
A
3
4
1
Middle
level
Lowest
level
Highest
level
C
STEP 5: D
Position the Toddler Rail (D) between
the Headboard and Footboard (A) and
align the holes.

Page 7 of 8
JEUNE FRENCH CONTEMPORARY UPHOLSTERED CRIB TODDLER BED KIT – ASSEMBLY INSTRUCTIONS
Model No: 1079 - 14
D
D
D
11 10 8
9
8
STEP 6:
Attach the Toddler Rail (D) to the Headboard
and Footboard (A) by using Medium Bolts (9),
Long Bolts (10), and Half Moon Washers (11).
Tighten with Allen Key (8).

Page 8 of 8
JEUNE FRENCH CONTEMPORARY UPHOLSTERED CRIB TODDLER BED KIT – ASSEMBLY INSTRUCTIONS
Model No: 1079 - 14
STEP 7:
Carefully turn the crib upright.
When converting the crib to toddler bed, Short
Bolts (12) should be inserted in the upper holes
of the Headboard and Footboard (A) and tightened
with the Allen Key (8).
After crib is completely assembled,
return to each bolt and tighten to a
snug fit. DO NOT overtighten.
WARNING:
A
A
8
12
CARE INSTRUCTIONS:
1. DUST OFTEN USING A SOFT CLOTH.
2. BLOT SPILLS IMMEDIATELY AND WIPE WITH A CLEAN, DAMP CLOTH.
3. DO NOT USE CHEMICAL CLEANERS, ABRASIVES OR FURNITURE POLISH ON THE LACQUERED FINISH.