RHINO DIGITAL VIDEO RECORDER User manual

DIGITAL VIDEO RECORDER 1
W
ARNING
This symbol is intended to alert the user to the presence of unprotected
“Dangerous voltage" within the product's enclosure that may be strong
enough to cause a risk of electric shock.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
NOTE: This equipment has been tested and found to comply with the limits for a class
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate
collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The recycling of materials will
help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office , your household waste disposal service or the shop where you
purchased the product.

USER’S MANUAL
2
PRECAUTION
• Make sure to switch the power off before you install the DVR.
• There is the danger of an electric shock if the DVR is opened by an unqualified service
engineer or installer.
• Avoid using the DVR outside of the reference temperature and humidity indicated in the
specification.
• Avoid exposing the DVR to violent movement or vibration.
• Do not use or store the DVR in direct sunlight or near to any source of heat.
• Do not place any object into the holes used for air circulation.
• Always use the DVR in a well ventilated location to prevent overheating.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• When the cooling fan is stopped, the below warning message will be displayed
at the monitor.
“ COOLING FAN IS STOPPED, TURN THE POWER OFF AND CHECK COOLING FAN”
In this case, do the power off right away and check the cooling fan working.
• The HDD is recommended to use enhanced IDE Hard Disc Drive type made by
Western Digital, Seagate, Hitachi and IBM, Samsung Electronics.
EXTERNAL HDD BAY (If specified as an accessory)
• Always attach the joining cable lead between the DVR and the HDD Bay for correct system
management. (Refer to the section describing the installation procedure for the EXTERNAL
HDD BAY)
• While the EXTERNAL HDD BAY is in operation never disconnect the power or connecting
cable. Before opening the top cover, you must turn off the power by the switch on the front
panel of the DVR. And then disconnect the power cord and other cables. Failure to follow
this procedure will result in lost data or malfunction of the system.
• When replacing any HDD always make certain that the replacement part is fitted in the same
place and with the same connections as the original.
All the safety and operating instructions must be read before the unit is operated.

DIGITAL VIDEO RECORDER 3
CONTENTS
TABLE OF CONTENTS
1. FEATURE LIST ----------------------------------------------------------------------------------
2. PACKING DETAIL ------------------------------------------------------------------------------------------
3. LOCATION AND CONTROL -----------------------------------------------------------------
3.1 FRONT PANEL CONTROLS -------------------------------------------------------------------------------
3.2 REAR PANEL CONNECTORS -----------------------------------------------------------------------------
4. INSTALLATION ---------------------------------------------------------------------------------------------
4.1 TOTAL CONNECTION LAY-OUT -------------------------------------------------------------------------
4.2 INDIVIDUAL CONNECTION --------------------------------------------------------------------------------
4.2.1 CAMERA ------------------------------------------------------------------------------------------
4.2.2 AUDIO ---------------------------------------------------------------------------------------------
4.2.3 MONITOR -----------------------------------------------------------------------------------------------
4.2.4 EXTERNAL HDD BAY--------------------------------------------------------------------------
4.2.5 USB 2.0 Ports -----------------------------------------------------------------------------------
5. OPERATION --------------------------------------------------------------------------------------
5.1 FACTORY DEFAULT ------------------------------------------------------------------------------
5.2 FRONT PANEL CONTROLS ------------------------------------------------------------------------
5.2.1 POWER ON / OFF --------------------------------------------------------------------------
5.2.2 SCREEN DISPLAY ------------------------------------------------------------------------------
5.2.3 RECORD ---------------------------------------------------------------------------------------
5.2.4 SEARCH & PLAYBACK ------------------------------------------------------------------
5.2.5 PLAY BUTTON INFORMATION ------------------------------------------------------------
5.2.6 DIGITAL ZOOM------------------------------------------------------------------------------------
5.2.7 SCREEN SELECT (LV/PB)----------------------------------------------------------------------
5.2.8 SPOT MONITOR-----------------------------------------------------------------------------------
5.2.9 COPY ----------------------------------------------------------------------------------------------
5.2.10 DVR STATUS ------------------------------------------------------------------------------------
5.2.11 PTZ CONTROL------------------------------------------------------------------------------------
5.2.12 FUNCTION BUTTON ---------------------------------------------------------------------------
5.2 REMOTE CONTROLLER-------------------------------------------------------------------------
5.3 MOUSE CONTROL --------------------------------------------------------------------------------
6. MENU SETUP ----------------------------------------------------------------------------------------------------
6.1 QUICK SETUP -----------------------------------------------------------------------------------------------
6.2 SCREEN ------------------------------------------------------------------------------------------------------
6.3 RECORD ----------------------------------------------------------------------------------------------------
6.4 EVENT ---------------------------------------------------------------------------------------------------------
6.5 SYSTEM ------------------------------------------------------------------------------------------------------
6.6 LINK -------------------------------------------------------------------------------------------------------------
6.7 SEARCH ------------------------------------------------------------------------------------------------------
6.8 COPY -------------------------------------------------------------------------------------------------------------
6.9 EXIT -------------------------------------------------------------------------------------------------------------
5
7
8
8
9
10
10
11
11
11
12
13
14
15
15
18
18
18
20
20
24
25
25
26
27
31
31
32
33
34
34
34
36
44
50
54
62
64
65
65

USER’S MANUAL
4
CONTENTS
7. EXTERNAL TERMINAL INFORMATION ---------------------------------------------------
7.1~2 RS-485 / T.ADJ-----------------------------------------------------------------------------------------
7.3~4 RELAYOUT / ALARM --------------------------------------------------------------------------------------
7.5~6 VGA / SERIAL ----------------------------------------------------------------------------------------------
7.7~8 ETHERNET/USB / REMOTE -----------------------------------------------------------------------------
8. SPECIFICATIONS ----------------------------------------------------------------------------
9. 256 CAMERA INTEGRATION SYSTEM --------------------------------------------------
10. HDD INSTALLATION ------------------------------------------------------------------------
10.1 INTERNAL HDD INSTALLATION -------------------------------------------------------------------
10.2 DVD±RW(or CD-RW) installation-------------------------------------------------------------------
11. NETWORK CLIENT VIEWER MANUAL----------------------------------------------
11.1 INSTALLATION OF NETWORK VIWER SOFTWARE ------------------------------------------
11.1.1 SYSTEM REQUIREMENT ---------------------------------------------------------------------
11.1.2 NETWORK ENVIRONMENT ------------------------------------------------------------------
11.1.3 INSTALLATION -----------------------------------------------------------------------------------
11.2 CONNECTING TO DVR ---------------------------------------------------------------------------------
11.2.1 ADD A NEW SITE INFORMATION --------------------------------------------------------
11.2.2 CHANGE THE SITE INFORMATION ------------------------------------------------------
11.2.3 DELETE THE SITE INFORMATION -------------------------------------------------------
11.2.4 CONNECT TO A DVR -----------------------------------------------------------------------
11.3 DVR SEARCH ---------------------------------------------------------------------------------------------
11.4 HDD SEARCH ---------------------------------------------------------------------------------------------
11.5 FILE SEARCH -----------------------------------------------------------------------------------------------
11.6 ARRANGE THE SCREEN ------------------------------------------------------------------------------
11.7 OPTION -------------------------------------------------------------------------------------------------------------
11.8 CONTROL---------------------------------------------------------------------------------------------------
11.8.1 SCREEN DISPLAY-----------------------------------------------------------------------
11.8.2 CONTROLLER----------------------------------------------------------------------------
11.8.3 PTZ-------------------------------------------------------------------------------------------
11.8.4 SETUP--------------------------------------------------------------------------------------
11.8.5 STATUS-------------------------------------------------------------------------------------
11.8.6 PRINT---------------------------------------------------------------------------------------------
11.8.7 COPY----------------------------------------------------------------------------------------------
11.8.8 AUDIO IN-----------------------------------------------------------------------------------------
11.8.9 AUDIO OUT--------------------------------------------------------------------------------------
11.8.10 TIME SEARCH------------------------------------------------------------------------------------
11.8.11 EVENT SEARCH--------------------------------------------------------------------------------
11.8.12 BLOCK SEARCH------------------------------------------------------------------------------
11.8.13 LOG SEARCH----------------------------------------------------------------------------
11.9 KEY INFORMATION ------------------------------------------------------------------------------------
66
66
67
68
69
70
73
74
74
77
79
79
79
79
79
79
80
80
80
80
81
81
82
82
83
84
84
84
85
85
86
86
87
87
87
88
88
89
89
90

DIGITAL VIDEO RECORDER 5
FEATURES
Chapter 1 Features
Operation
Playback, recording, backup and transmission simultaneously
Real time single or multi-screen display
Pan & Tilt, 2X digital zoom and PIP display
Easy operation by IR remote controller, external keypad controller and USB 2.0 Mouse
Hidden camera option (covert)
User-friendly setup menu and operation
Playback
Multi-screen playback (Full/4/6/7/9/10/13/16 split)
Search by date, time and camera
Preview window on event search mode
Playback mode(frame/ field) setup
Recording
Select of the recording quality grade for each channel
Individual camera frame rate can be set by user
The recording speed of max. 120 images per second (NTSC)
Manual, schedule and event recording
Pre & Post-alarm recording
Select of the recording image size for each channel
4 channels audio recording
Select of the event mode for each channel
Network
Live and playback viewing
Remote control on a networked PC with the exclusive client viewer
(The viewer software is supplied for free.)
Flexible connections - 10/ 100 Mbps Ethernet/ ADSL
Up to 16 network users access simultaneously
Audio transmission between DVR and Client
Dynamic IP is available

USER’S MANUAL
6
FEATURES
External storage
Automatic backup to selected backup HDD (Event backup/ Mirroring)
Own external storage device to extend the HDD capacity
You can install 10 HDDs in 1 external HDD Bay and connect up to 4 Bay with this DVR.
(250GB X 40HDDs = 10TB, 500GB X 40HDD = 20TB, 1TB X 40HDD = 40TB)
Audio
4 channels audio recording in real time
Audio channel select for each channel
Copy
USB 2.0 external HDD
USB 2.0 memory stick
External CD-RW/ DVD±RW (optional)
General
Software downloading facility via network and USB memory stick
Auto detection of PAL / NTSC
Built-in hardware Watchdog
Automatic time adjustment through Network
VGA output for PC monitor(Optional)
Optional external CDRW or DVD±RW
Loop-through connections
Support of multiple Languages
Graphic User Interface for the MENU screen
Analog Spot

DIGITAL VIDEO RECORDER 7
PACKING DETAIL
Chapter 2 Packing Detail
1. DVR
2. Network Viewer Program CD
3. User’s Manual
4. Remote Controller
5. R-HDD Rack Key
6. Rack Mounts
7. AC Adaptor & Power Cord
8. Batteries (For Remote Controller)
9. HDD Screws
CONTENTS
4. Remote controller
3. User’s Manual
1. DVR
2. Network Viewer Program CD
5. R-HDD Rack Key
7. AC Adaptor & Power Cord
6 Rack Mounts
9. HDD Screws
8. Batteries

USER’S MANUAL
8
LOCATION AND CONTROL
Chapter 3 Location and Control
3.1 FRONT PANEL CONTROLS
○
5○
19 ○
6○
20 ○ 27 ○ 21 ○ 18 ○
4○ 8○
12 ○ 14 ○ 10 ○ 16 ○
9○ 7○ 2○ 1
○
11 ○ 26 ○ 25 ○ 24 ○ 25 ○ 22 ○ 23 ○ 15 ○ 17
Control keys Description
○
1CD-RW / HDD Rack Removable HDD rack (Option: Built-in CD-RW or DVD±RW)
○
2USB port USB 2.0 port to use a USB Pen-Driver, Mouse or USB external devices
○
3Remote Sensor IR receiver for the remote controller
○
4FUNCTION Audio select (FUNCTION + channel)/ Relay4 User action(FUNCTION + “+” / “-“)
○
5CHANNEL SELECT Buttons to select the camera or input the password
⑥ MULTI Multi-channel select button
○
7LED Indicator Display of the status of power(STANDBY), HDD(HDD) and network(RX / TX)
○
8SPOT / ESC Button to control spot monitor/ ( exit & return ) during the menu setting
○
9LV / PB Button to convert the Display between real view mode and playback mode
○
10 MENU Button to Menu setup / move to the upper direction
○
11 COPY(AF) Button to data-copy menu/ automatically focus in PTZ mode
○
12 ALARM RESET Button to release the event signal/ move the left direction/ PAN left in PTZ mode
○
13 AUTO / F(-) Button to the auto sequence mode/ decrease the value/ focus in PTZ mode
○
14 STATUS/ ( enter ) Button to enter the next step/ display the status/ return to home position in PTZ mode
⑮PIP/ Button to the PIP display mode / move to the Down direction
○
16 D-ZOOM / Button to control the digital zoom/ move to the right direction/ PAN right in PTZ mode
○
17 FREEZE / F(+) Button to freeze image / increase the value/ focus in PTZ mode
○
18 REC( ) Button to enable and stop recording
○
19 SLOW( ) Button to control the slow motion of playback speed
○
20 PB / PAUSE( ) Button to the playback mode. If press again, a still picture is displayed during
playback.
○
21 FAST( ) Button to speed up the playback speed
○
22 DIRECTION( ) Button to change the direction of playback
○
23 SEARCH(PRESET) Button to the search menu / preset in PTZ mode
○
24 PTZ Button to control PTZ camera
○
25 PTZ Zoom Button to adjust PTZ Zoom increase/decrease (+/-)
○
26 PTZ IRIS Button to adjust PTZ Lens iris increase/decrease (+/-)
○
27 AUDIO SELECT Button to choose Audio channels
○
3

DIGITAL VIDEO RECORDER 9
LOCATION AND CONTROL
3.2 REAR PANEL CONNECTORS
Port Name Description
○
1CAMERA IN BNC input ports for cameras
○
2CAMERA OUT BNC output(looping) ports for cameras
○
3SPOT BNC output port for spot monitor
○
4VIDEO OUT BNC output port for the main monitor
(Same as the RCA video output of the front panel)
○
5AUDIO IN RCA input ports for an audio signal(4CH Line input)
○
6AUDIO OUT RCA output port for an audio signal
○
7ETHERNET Port for 10/ 100Mbps Ethernet/ xDSL
○
8USB1 / USB2 USB 2.0 ports to use USB memory stick, Mouse or the external devices
○
9VGA OUT Output port for the VGA monitor
This DVR is compatible with TFT LCD monitor in PAL mode.
○
10 SERIAL Connector for debugging. This DVR can be controlled by the other device
through this connector(RS-232C).
○
11 S-VIDEO OUT Output port for the S-video output
○
12 GROUND Earth ground port to connect with the external devices
○
13 RS-422 / 485 Terminal blocks of RS-422 or RS-485
○
14 T-ADJ Input and output terminal blocks for time synchronization among DVRs
○
15 RELAY OUT 4 relay output terminal blocks
○
16 ALARM IN Input terminal blocks for alarm signals
○
17 POWER IN Socket for a 12V/5A power cord
○
4
○
7
○
8
○
10
○
9○
17○ 14 ○ 16
○
6
○
12○ 13○
11 ○
15
○
1
○
2
○
3○ 5○
16

USER’S MANUAL
10
INSTALLATION
Chapter 4 Installation
4.1 TOTAL CONNECTION LAY-OUT

DIGITAL VIDEO RECORDER 11
INSTALLATION
4.2 INDIVIDUAL CONNECTION
4.2.1 Camera
* Connect a female BNC connector of each camera to a male BNC connector, “CAMERA IN” port.
* Connect the looping BNC output to other inputs as required
4.2.2 Audio (*Refer to the specification)

USER’S MANUAL
12
INSTALLATION
Audio Input
- AUDIO IN : Connect the RCA Line Jack of the relevant equipment (for example, a camera with
a built-in microphone) to the AUDIO IN port
Audio Output
- AUDIO OUT : Connect the RCA Line output to a monitor with a built-in speaker
4.2.3 Monitor
- Connect the female BNC for monitor output.
- Connect the male Y/C cable socket for S-VIDEO monitor output.
NOTE
This DVR can be connected only with a line audio and not support a microphone for audio input and output.
To record audio should be enable in the AUDIO setup at the MENU setup.
As the audio is linked to a camera, it is required that linked camera viewed, either in multi-screen view during
playback to hear the audio.

DIGITAL VIDEO RECORDER 13
INSTALLATION
4.2.4 External HDD Bay (XHD-10U)
(USB output)
INSTALLATION PROCESS.
1) Turn off the power of DVR.
2) Connect the grounding conductor between DVR and external HDD bay.
3) Connect the USB cable between DVR and external HDD bay.
4) Connect the power cord of DVR and external HDD bay.
5) Plug the power cord of DVR and external HDD bay.
6) Turn the power of DVR on.
7) After booting the system automatically, press the STATUS button and check the system
information of setting the HDD. (If the HDD is not recognized properly, turn the power of
DVR off first and check the cable connections referring to user’s manual of XHD-10U.)
CAUTION - Do not disjoint the external HDD Bay from DVR in normal operating condition.
NOTE - Please refer to the XHD-10U user’s manual for more information.

USER’S MANUAL
14
INSTALLATION
4.2.5 USB 2.0 ports
○
1Three USB ports are provided to connect a USB memory stick, One USB port is on the front
panel and the other two are on the rear panel.
○
2A USB mouse can be connected to one of the ports. You can use the mouse to navigate
through the screens and menus much like you work on a computer.
INSTALLATION PROCESS.
Connect the desired device with DVR as the above pictures.
(For example, USB memory stick, mouse, external storage device etc.)

DIGITAL VIDEO RECORDER 15
OPERATION
Chapter 5 Operation
5.1 FACTORY DEFAULT
MENU Setup>
QUICK SETUP>
QUICK SETUP…………………….….…….…..…..……….OFF
IMAGE SIZE……………………….………………...…….…720x240
RECORD FRAME……………………….……….…….……60
EVENT……….…………………………...…………..……...ALL
PRE RECORD TIME……….…………...….……..………..5SEC
POST RECORD TIME………………….…...…….…..…..10SEC
IMAGE QUALITY…..…………………………….….………FINE
AUDIO RECORD…………………………….………..…….OFF
REMOTE CONTROL ID…………….…..………..………..ALL
SCREEN>
AUTO SEQUENCE
QUAD-A~E/ NINE-A~B/ SIXTEEN………...…....3SEC
ADD AUTO SINGLE….………………..….……...OFF
AUTO-SINGLE CH1~16………………..….…..…3SEC
VIDEO LOSS SKIP..…………………….……..….ON
DISPLAY
HDD FREE SPACE.……………….……….……..ON
HDD FREE SPACE MODE..…...…………..…….PERCENT
RECORD STATUS..………………………....…...ON
CLOCK DISPLAY…………………..…….….….…ON
DATE & TIME MODE..…………….……..…...….NUMBER
TITLE DISPLAY………………………....…….….ON
TITLE MODE…………………………..….….…...TEXT
BORDER COLOR.………………………..….……WHITE
REMOTE CONTROL ID..………….…….….……OFF
TITLE
CH 1~CH 16………………………….…………....CH 1~CH16
MULTI SCREEN
LIVE 4E………………………………….………....2/ 4/ 6/ 8
LIVE 9B…………………………………………....10/11/12/13/14/15/16/1/2
COVERT
CH 1~16………………………….….….………....OFF
SELECT……………………………….………..…..LV&PB&NW
SPOT
SPOT MODE……………………….……………..MANUAL
SPOT SEQ. TIME….……………..….….….…....3SEC
RECORD>
RECORD SETUP
RECORD PROGRAM..………………………......6
RECORD PROGRAM (Refer to page 51)

USER’S MANUAL
16
OPERATION
IMAGE QUALITY
RECORD QUALITY……………………….…….....FINE
AUDIO RECORD
AUDIO 1………………..…………………….…......OFF
AUDIO 2………………..…………………….…......OFF
AUDIO 3………………..…………………….…......OFF
AUDIO 4……………..……………………….…......OFF
REPEAT RECORD
REPEAT RECORD..………………………………..ON
REPEAT RECORD ALARM.…………………..…..5%
PLAY MODE.…………………………………….……........FRAME
BACKUP MODE..……………………………….……........OFF
HOLIDAY
HOLIDAY RECORD…………………………….….OFF
HOLIDAY SETUP(MM/DD) ………………..……..00/00
EVENT>
MOTION DETECTION
CHANNEL…………………………………….……..1
SENSITIVITY…………………………...….……….5
EVENT SCREEN MODE…………………...…….…….…SCREEN HOLD
EVENT CHECK.………………………………..….………OFF
EVENT MESSAGE..…………………………….………....OFF
EVENT MESSAGE RESET……………….……...…..…..5SEC
EVENT BUZZER..…………………………………….…...OFF
SENSOR INPUT
SENSOR 01~16 INPUT TYPE..…………………..NOT USED
RELAY OUTPUT
CH 1~16: ALARM/ V-LOSS/ MOTION..……….…1/ 2/ 3
RELAY 1~3 OUTPUT TIME..………………..……1SEC
RELAY 4 SELECT.….………………….……..……POWER
SYSTEM>
HDD
HDD CONFIGURATION
REC HDD INITIALIZE…..………………….………NO
BACKUP HDD INITIALIZE…………………………NO
CLOCK
TIME ADJUST
INTERNET TIME ADJUST...………………OFF
DAYLIGHT SAVING TIME..…….………....OFF
PASSWORD
MASTER PASSWORD…..…………….…………..11111111
SUPERVISOR PASSWORD.………….…………..22222222
MENU DISPLAY CHECK.……………….…………OFF
REC/PLAY CHECK…..………………….……….…OFF
VIDEO STANDARD…………….…………………………..AUTO
LANGUAGE……………….………..………………….…….ENGLISH
REMOTE CONTROL ID.…………….………..………….. ALL
KEY ECHO…..………………….……………….…………..ON
DVR INITIALIZE.………………….………..…….…………NO
FIRMWARE UPGRADE………………….……….………..NO
LINK>NETWORK
DHCP……..………………………………….………OFF
PORT……………………………………….………..5200

DIGITAL VIDEO RECORDER 17
OPERATION
RS232C
BAUD RATE..………………….…………….……..115200
DATA BIT……..……………………………….…….8
PARITY BIT….……..……………………….………NONE
STOP BIT……..…………………………….……….1
RS485
SYSTEM ID……..…………………………….…….1
BAUD RATE..………………….……………….…..115200
DATA BIT……..………………………………….….8
PARITY BIT….……..………………………….……NONE
STOP BIT……..……………………………….…….1
PTZ
CH 1~16: MODEL/SPEED/ID….…………………..NONE/9600/1
E-MAIL
SEND E-MAIL………………………………..OFF
SEARCH>
CALENDER SEARCH
SEARCH & COPY
TIME SEARCH
HDD ID…………………………………………..…..NORMAL
CHANNEL…………………..……………………….ALL
EVENT SEARCH
HDD ID……………………………………………....NORMAL
CHANNEL…………………..…………….………....ALL
EVENT…………………..……………….…..………ALL
BLOCK SEARCH
HDD ID………………………………………………..NORMAL
FILE SEARCH
MEDIA………………………………………...……...FRONT USB
BOOKMARK SEARCH
LOG SEARCH
COPY>
COPY STATUS
COPY START/ END/ CUR TIME.………….………2000/00/00 00:00:00
MEDIA FORMAT
FORMAT MEDIA..……………………….…………..USB FRONT
EXIT>………………………………………………………...…….….SAVE ONLY

USER’S MANUAL
18
OPERATION
5.2 FRONT PANEL CONTROLS
5.2.1 POWER ON /OFF
After the connection of power cord and other devices with this DVR, turn the power on.
a. The video signal system (NTSC or PAL) is automatically
detected.
b. Power Failure Recovery
This DVR automatically reverts back to programmed record
parameters upon power restoration.
5.2.2 SCREEN DISPLAY
5.2.2.1 Multi-Display & Full Screen display
a. Multi display
To change a single camera display to the multi camera, press the MULTI button.
b. Full screen display
Press the desired camera number button to display on the monitor.
•If there is no video signal, the video signal system is set to NTSC. Do not input the PAL type video signal or it may
cause the DVR’s malfunction. In this case, turn off and on again.
Use the +10 Button when you select two digit camera numbers.
EX) Camera Number 12 = Press the +10 Button, and then press the No. 2 Button.
CAMERA/NUMBER INPUT buttons are used to input the password in the password lock function.

DIGITAL VIDEO RECORDER 19
OPERATION
5.2.2.2 Auto Sequence Display
<ADDAUTOSINGLE:ON>
- Press the AUTO button, each screen display will be automatically switching according to the AUTO
SEQUENCE setup.
- If you set up “ADD AUTO SINGLE : OFF” in the AUTO SEQUENCE setup menu, the single display
will be skipped.
- To view the single display, set up “ADD AUTO SINGLE : ON” in the AUTO SEQUENCE setup
menu and the single display will be included in the auto sequence display.
- Press the AUTO button again to exit the AUTO mode.
5.2.2.3 Freeze
MULTI SCREEN MODE
At the Multi display mode, press the FREEZE button and then select the desired camera number.
Press the FREEZE button again to release the FREEZE mode.
SINGLE SCREEN MODE
Press the FREEZE button after the desired channel is selected.
Press the FREEZE button again to release the FREEZE mode.
- If you press the MULTI button after pressing the FREEZE button, all the channels will display
still images.
- FREEZE function is not available, when auto mode is selected.
(Refer to AUTO SEQUENCE in the SCREEN menu for further information)
If an event takes place, the AUTO SEQUENCE mode will be cancelled.
Please refer to the AUTO SEQUENCE of Chapter 6 MENU setup for more information.(Page 37)

USER’S MANUAL
20
OPERATION
5.2.3 RECORD
Press the REC button and the following message will be displayed as below;
MANUAL MODE
Press the REC button to begin recording.
To stop recording, press the REC button again. The screen will be turned into real time display
mode.
SCHEDULE MODE
When Schedule mode is selected, the recording will be automatically executed according to the
recording schedule. (Please refer to the SCHEDULE SETUP in the RECORD setup, page 44.)
5.2.4 SEARCH & PLAYBACK
Press the SEARCH button, the SEARCH menu screen appears.
TIME SEARCH
The color of record indication ( NNNNNNNN ) on the screen will be changed according to the type of
recording and refer to the following.
- “ N ” : Manual recording status.
- “ S” : Schedule recording status.
- “ E ” : Event recording status. (Motion detection/ Video loss/ Sensor)
- “ - ” : Not recording.
If you press the PLAY button in the real time screen mode, playback will be executed from the end of
the previous time search and press the desired channel select button.
To exit the playback mode and see the live screen again, press LV/PB button.
All channels will be displayed by “E” even if an event happened just on one channel.
“E” will be displayed because this unit enters the event record mode when event happened.
If a channel has an event, all channels will be recorded by event recording frame rate to be set
in RECORD PROGRAM menu.