GENERAL EXPLANATION
Handle
Seat
Adjustable
Legs
Back
D
SET UP
Prior to use, please read all instructions.
We recommend you keep this user guide for future
LIFETIME LIMITED WARRANTY
Your Rhythm Healthcare product is warranted to be free of defects in materials and
workmanship for the lifetime of the original consumer purchaser. This device was built to
exacting standards and carefully inspected prior to shipment.
This Lifetime Limited Warranty is an expression of our confidence in the materials and
workmanship of our products and our assurance to the consumer of years of dependable
service.
In the event of a defect covered by this warranty, we will, at our option, repair or replace
the device.
This warranty does no cover device failure due to owner misuse or negligence, or normal
wear and tear.
The warranty does not extend to non-durable components, such as rubber accessories,
casters, and grips, which are subject to normal wear and need periodic replacement.
Should you have any questions regarding your Rhythm Healthcare product or warranty
please call your local dealer or contact us directly.
CLEANING
Do not use high pressure cleaners, steam cleaners or harsh, caustic chemicals for cleaning.
> Use a non-abrasive detergent or household cleaner with warm water.
> Rinse with warm water and wipe dry.
> DO NOT USE AN ABRASIVE CLEANER OR CLOTH with this product, as damage
may ensue.
Place the bench with the seat facing down on a level
surface. Insert the two legs with large suction tips into the
end of the frame that has the seat handle slots. Depress
the chrome button at the top of the leg and push the leg
into the frame. Ensure that the chrome button clicks and
locks into position. Following the same procedure, insert
the two legs with small suction tips at the other end of the
bench [A].
Insert the backrest extensions into the backrest tubes.
Depress the chrome button on the backrest tube and
ensure that the chrome button clicks and locks into
position [B].
Turn the bench on its side and insert the backrest
extensions into the four tubing slots under the seat.
Depress the chrome button on the backrest extensions
and ensure that the chrome buttons click and lock into
position from the top tubing slots. The backrest can slide
on either side of the bench depending on the direction
the you will be sitting [C].
Place the bench upright so that it is resting evenly on all
four legs and insert the seat handle into the seat handle
slots. Depress both chrome buttons on each side of the
handle and push down until the chrome buttons click and
lock into position [D].
To adjust the legs and seat height, depress the chrome
button on the legs and slide each leg to a desired height.
Be sure all four legs are level, stable, and all push buttons
are fully locked into position before using. The two legs
with large suction tips should be used inside of the shower.
A
BC
1
1
1
2
1
3
1
4
1
5
D
2 3
