Rich Bit TOP-017 User manual

017
Shenzhen Xinhuanan Bicycle Industry Co.,Ltd
Electric Bicycle
User Manual
Before The First Cycling,
Please Read This Manual For Security!
TOP-017

Model: TOP-017
04
13-14
15
16
17
18
05
06
07
08
09
10
11-12
02
03
Content
Warning
Safety Precautions
Electric Bicycle Parts Introduction
Wheel Installation
Handlebar Installation
Front Light Installation
Saddle Installation
Pedal Installation
Plug-in Battery Disassembly and Charge Mode (direct charge)
Control operation instructions
LCD Display Monitor Description Error Demonstration
Error Demonstration
Maintenance
Specifications
After-sale Service
01 Electric Bicycle User Manual

Inspection Before Riding
1. Saddle seat post (Whether it does not cross the limit line or is locked tight).
2. Bell (Does it ring well).
3. Handle bar or Stem (Is it not over the limit line, Is it locked tightly).
4. Front and rear brakes (Whether the work is normal, whether the wire is rusted, is the lever fixed?).
5. Battery(Whether the lights are on or off)
6. Front brake and rear brake(Whether it works well, sounds good or not).
7. Spokes( No crack and no losse spokes).
8. Front and rear hub( Check if fixed on the wheels).
9. Motor (There is no loose attachment, does the chain rise and fall smoothly).
10. Battery (Is it correctly installed and fixed).
11. Pedal crank (No rattling).
12. Chain (Do not idle, whether pebbles are not jammed, tooth skipping, play is appropriate).
13. Wheels (rattling, spokes, hub rattling, bending, no deformation or tire pressure is appropriate).
Warning!
Inspection before riding should be carried out.
02 Electric Bicycle User Manual

Safety Precautions
03 Electric Bicycle User Manual
1.Wear earphone while cycling is not permitted in road traffic act.
2. Avoid the clothes too long to be caught by wheels and belts.
3. Do not release the steering wheel except the signal shows.
4. Avoid clothes that are easily caught by wheels and belts.
5. Do not ride when you can see the limit line of a saddle or handle.
6. Use front and rear brakes and do not put your feet on the pedals when stop.
7. Do not ride the Ebike without light, especially in night( check the battery condition
before your ride in night).
8. Do not ride when you are not feeling well such as drunk or taking medication.
9. Do not wear slippery shoes (such as sandals) or high-heeled shoes.
10. Do not use mobile phone when riding or stopping.

Grip
Saddle
Battery
Motor
Chain
Free wheel
Fork
LCD display
Brake-Rake material: rubber.
(It does not include asbestos.)
Front light
Aluminum alloy rim
Tire
Hub
Disc Brake
Crank
Pedal
Budelice Ski Material
Burefoot: Pure Steak
(Not including asbestos)
Electric Bicycle Parts Introduction
04 Electric Bicycle User Manual

Pay attention to the direction of the disc brake
when installing the front wheel as shown.
Pay attention to the direction of the pring
when fixing quick release part
Install the quick release part in turn to the
front wheel.
Loosen the nut and put the front wheel in the
middle of the fork.
Slightly minor force launching, quitting fast
speed leisurely fitting, fitting before wheelchair,
finished inexpensive hard rocking, jumping one
piece swinging dynamic phenomenon.
For your safety, please check regularly to see if
the quick release is loosen, install the wrench in
the proper direction at 10 o'clock on the quick
release part.
WheelInstallation
05 Electric Bicycle User Manual
01 02
04
06
03
05

Remove the screws and black cap with tools.
Reset and tighten the screws and black cap and
make sure the handlebars are in the right direction
Remove the screw at the handlebar and insert the
lever as shown.
Handlebar Installation
06 Electric Bicycle User Manual
01 02
03 04
Make sure the handlebar is at the bottom of the
lever and tighten the removed screws with tools.

Remove the screws on the bike body.
Tighten the screws. The front light is assembled.
Fix the front light to the screws as shown.
Front Light Installation
07 Electric Bicycle User Manual
01 02
04
03

Open the seat post clamp quickly and place it in the seat tube.
Adjust the mat to a suitable height and snap seat post clamp until it does not shake.
Saddle
08 Electric Bicycle User Manual
01
02

The pedal may tilt and slide during installation but it cannot be tried hard. It is necessary to find the
correct position and the installation can be done easily.
Before installation, you should pay attention to
the positions of the pedal as shown at the
bottom. L corresponds to the left as Figure (3),
and R corresponds to the right as Figure (1).
For pedal installation, please rotate and tighten
with a tool. Both sides of the pedal are in the
front direction.
L
Pedal Installation
09 Electric Bicycle User Manual
01
03 04
02

Find the charging hole on the right side of the body and insert the charging cable.
When plug in the power, red indicator shows the start of charging. Green light indicates
that charging is completed.
Plug-in battery disassembly and charge mode
(direct charge).
10 Electric Bicycle User Manual
01
02

Open the keyhole as shown with the key, unscrew the battery lock and then remove the battery.
Control operation instructions
When plug in the power, red indicator shows the start of charging. Green light indicates that
charging is completed.
11 Electric Bicycle User Manual
01
02

1.Grip
1
2
2.Light/Horn Button
3
4.LCD display
6
5.LCD Monitor
Control settings
7
6.Rear shifter
8
6
3.Mobile Holder
3
2
1
1
3
2
3
Speed
Key
Battery
PAS level minus
ON/OFF
PAS level up
Trip
PAS
Control operation instructions
12 Electric Bicycle User Manual
1
2
4
5
4
5

LCD Display Monitor Description
13 Electric Bicycle User Manual
Screen Display
Speed
01
ODO/TRIP/TIME
ODO（Odometer/ Trip /Time switch by
the function key
Battery Indicator
SOC(State of Charge) Display
PAS
PAS Instruction
0-7file display speed PAS

Operating instructions
02
Operating Mode：1x Long
Function：Power On
Single click to turn on the system,all the
contents show one time.
Operating Mode：1x briefly
Function：ODO/TRIP/TIME
After you turn on the system, once again
Click to switch.
1x Long press to close the system.
14 Electric Bicycle User Manual
Operating Mode：1x briefly
Function：PAS Increase
Every click means increasing 1 gear
PAS, totally 7 gears.
Operating Mode：1x briefly
Function：PAS Reduce
Every click means decreasing 1 gear
PAS,totally7 gears. Flashing at lowest (0),no
power at this time.
Configuration Instructions
03
Work Voltage: 48V(Lithium Battery)
Adapted motor: Motor with speed outputting function, Using this motor can
show the speed accurately.
M
M
Operating Mode：1x Long
Function：OFF

Error Demonstration
15 Electric Bicycle User Manual
1.Can not be charged.
Solution: Please contact us if you can not charge after seriously inspecting the
power connection etc. Charger can be changed.
2.Tap hole is defective.
Note: Inspect it seriously before shipping, when aligning, align it to the tapped hole and tighten
the screw. (If you do not align to the tapped hole and tighten the screw, the tapped hole may be
damaged.)
3.It does not work properly for the battery or LCD display.
Note: The battery and LCD display are waterproofed, but be careful when there is a lot of water
or heavy rain.

Maintenance
16 Electric Bicycle User Manual
It should be regularly maintained and checked. Especially the transmission,
three brake systems and shafts,regular maintain and check are important.
1. Operating System: Some parts need to be lubricated.
(1) Brake rod (front and rear) wire movement part [brake material: refined steel (without asbestos)]
(2) Chain
(3) Wire loop section
(4) Movable parts of rear derailleur (rear derailleur) and front derailleur (front derailleur)
2. Brake: Please replace the brake Y type in one year. However, if you find rust or worn, replace it in
time. If it cannot be used, you should check the brake rubber.
3. Shaft: Please lubricate properly to make the front wheel, gear crank and rear wheel move
smoothly.
4. Wire: When enter dust and moisture environment, it may rust on the brake and derailleur wire. You
could take out of the pipe and lubricate the wire once in 2 years.
5. Tires
(1) Don't overinflate the tires.
(2) The tires will slide and move easily on wet situation. After it dry, you can lubricate the chain.
(3) Do not lubricate the tires and rims.
(4) After using the tire for a long time, please replace the tire, which will prolong the use of the bicycle.

Body frame material: 6061 aluminum alloy
Display: LCD display
Motor: 48V*1000W super large power motor for snowmobile
Battery: 48V*10AH lithium battery
Controller: 48V for high power snowmobile
Controller speed: 45-50km/h
Range: 31 km
Net weight: 31.2 kg
Gross weight: 38.8 kg
Box size: 150*34*84cm
17 Electric Bicycle User Manual
Specifications

After-sale Service
18 Electric Bicycle User Manual
(1) Please push the tire and check the condition of the tire pressure.
(2) Please check whether the tip gap is removed.
(3) Because of high temperature, there may be thermal expansion, tire will tend to puncture regardless of
quality.
About Configurations
Due to mass production and different batches, please understand that the item may not be the same as the
pictures in the brochure, but we guarantee that the changed parts will be updated.
About assembly
85% of bicycles manufactured by RICHBIT are assembled, but some parts must be assembled by the
buyer, such as pedal, saddle, front wheel, etc. For safety, please check and test everything before riding.
After inspection and adjustment, If there is any abnormality, please contact your seller. If you don't have
experience in assembly, please contact the bike shop for help.
Under the premise of normal use, with no external force injury and improper charging, the warranty period
is one year.
Damage and Scratches
To avoid damage, RICHBIT manufactures packed all bicycles in foam and cardboard.
If some parts are damaged, please take some photos of broken parts and send to your saled
representative for resolutions. If you have scratches, apply paint.
Adjustment of shifter
Although the shifter was installed, which was manufactured from RICHBIT, the transportation could cause
strong motion could . If there is any problem with adjusted shifter, please consult with the sales
representative.
Summer is a season that makes it easy to puncture tires. Please be careful.
It is necessary to check the tires before inflating.

Tel :
0755-81736468
Fax :
0755-81736451
Email:
[email protected]
Shenzhen Xinhuanan Bicycle Industry Co.,Ltd
Address:
1-336,xiangshang Rd, 3th Luotian Industry Zone, Songgang Town,
Bao'an Dist, Shenzhen, China