Richway & Fuji Bio Biobelt User manual

BIO-BELT™User Manual
BIO-BELT™Manuel de l'utilisateur
DOCUMENT NO: RW-USM-002 (Ver. 3.0, Date: 2017.11.07)
Manufacturer: Richway & Fuji Bio Inc.
1314 S King St Suite 520, Honolulu, HI 96814 USA
Contract Manufacturer: R&L Co., Ltd.
Address: 11F, Ace Gwangmyeong Tower B, 108 Haan-Ro, Gwangmyeong-Si,
Gyeonggi-Do, Korea 14319
BIO-BELT
READ AND FOLLOW THE INSTRUCTIONS IN THIS MANUAL TO PREVENT PERSONAL
HARM AND PROPERTY DAMAGE.
VEUILLEZ LIRE ET SUIVRE LES INSTRUCTIONS QUI SE TROUVENT DANS CE MANUEL
DANS LE BUT DE PRÉVERNIR LES DOMMAGES PERSONNELS ET À LA PROPRIÉTÉ.

1
Contents
Safety Precautions........................................................................................................2
Warning ................................................................................................................................... 3
Caution .................................................................................................................................... 3
Contraindications .................................................................................................................... 4
Indications for use................................................................................................................... 5
Read before operating the product ............................................................................5
Product components............................................................................................................... 5
Product description ................................................................................................................. 6
Product installation.......................................................................................................8
Checklist before product installation ...................................................................................... 8
Product installation.................................................................................................................. 8
How to use the product................................................................................................9
Turning ON and OFF.............................................................................................................. 9
Adjusting the product’s temperature .................................................................................... 10
After using the product.......................................................................................................... 10
How to clean and store the product.........................................................................11
How to clean the product.......................................................................................................11
How to store the product .......................................................................................................11
Trouble shooting guide ..............................................................................................12
Check before contacting customer service ......................................................................... 12
Product specications ...............................................................................................13
Product manufacturing information...................................................................................... 14
Customer service information ..................................................................................16
Product warranty.........................................................................................................17

2
e n g l i s h
Safety Precautions
WARNING :
Use carefully. May cause serious burns. Do not use over sensitive skin
areas or in the presence of poor circulation. The unattended use of the
BIO-BELT by children or incapacitated persons may be dangerous. The
BIO-BELT is a medical device and should only be used by a competent
adult. Elderly people and people with mobility issues need to be super-
vised.
- Do not alter, change or disassemble the product. Doing so may cause the product to
malfunction and electric shock and re may occur.
- Make sure to use the proper voltage for your country. Improper voltage may cause electric
shock, re or damage to the product.
- If there is a power outage, turn off the power and disconnect the plug.
- If the BIO-BELT catches re or begins to smoke, turn off and unplug the device. Report the problem
to our Customer Service Center.
- Do not allow children near the BIO-BELT unsupervised. Loss of life or injury may occur if a child
wraps the power cord around their neck or trips and falls over the power cord.
Read and follow all instructions in this manual. Proper use of the BIO-BELT will prevent harm to the user
and damage to private property.
CAUTION :
Property damage, device malfunction, or injury may occur if the following
instructions are not followed properly. If you do not feel well when using
the BIO-BELT, discontinue use and consult with a physician. Only use the
BIO-BELT for heat therapy. If it is not functioning properly, discontinue
use and contact Customer Service.
- Do not modify or tamper with the BIO-BELT.
- Do not jump, stand, or place heavy objects on the BIO-BELT.
- Do not place the controller on the BIO-BELT when in use. Keep the controller away from
the BIO-BELT.
- Do not place the BIO-BELT on surfaces that are sensitive to temperature (i.e. leather).
- Do not cover the controller. Doing so may cause overheating of the controller.
- Do not secure the BIO-BELT with any metal products such as pins.
- Do not drop, throw or mishandle the BIO-BELT controller.
- Do not use the BIO-BELT with any ointments, or creams that generate heat. Doing so may
cause burns or injury to your skin.
- Do not use the BIO-BELT with any oils without the waterproof cover. Doing so may cause
damage to the BIO-BELT.
- Do not operate the BIO-BELT near objects that generate heat (i.e. ventilation from heaters,
stoves) or magnetic elds (i.e.TV, magnetic objects).

3
- Do not use if the power cord is damaged.
- Low temperature burns can occur if using the BIO-BELT for a prolonged period of time. Use
with caution when the controller is set to 104° ~ 158°F (40° ~ 70°C). Stop using the BIO-BELT
if burns or blisters occur.
- Do not place the BIO-BELT directly on your skin. Place a towel in between the BIO-BELT and
your skin when operating to prevent burns.
- Do not connect the BIO-BELT to any other electronic device. This may cause injury, electric
shock or re.
- Do not use on sensitive skin or on areas where circulation is poor.
- Keep the BIO-BELT away from sharp objects. Do not allow anything to puncture the folds of
the BIO-BELT.
CONTRAINDICATIONS :
Do not use the BIO-BELT on infants and young children.
The BIO-BELT is not indicated for the elderly and should consult with a
physician prior to use.
Do not use the BIO-BELT if you have any of the following conditions:
▪Person with organ transplant
▪Person with high fever
▪Person with cognitive disability
▪Person with skin problems i.e. insensitivity to temperature change
▪Person with acute disease, acute tumor, external pacemaker, the visually impaired,
and any heart problems
If you have any of the following conditions, only use the BIO-BELT
if directed by a physician.
▪Person with immobility
▪ Person with internal pacemaker/debrillator
▪ Person with Adrenal Suppression Disorders, Addison’s Disease, Adrenal Insufciency,
Systematic Lupus Erythematosus, and Multiple Sclerosis (MS)
▪Person with bypass surgery
▪Person with diabetes
▪Person with high blood pressure (hypertension)
▪Person who is pregnant
▪Person who is sick
▪Person who recently received radiation/chemotherapy
▪Person with surgical or silicone implants

4
e n g l i s h
INDICATIONS FOR USE :
For use in adults over 18 years of age. The BIO-BELT is indicated for the
temporary relief of minor muscle and joint pain and stiffness; the tem-
porary relief of joint pain associated with arthritis; the temporary relief
of muscle spasms, minor sprains and strains, and minor muscular back
pain; the relaxation of muscles; and the temporary increase of local circu-
lation where applied.

5
BIO-BELT BIO-BELT Controller / Power Cable
Product components
※The components may change without notice due to product improvement.
Read before operating the product
User Manual

6
e n g l i s h
Product description
Belt Area
Heat is generated from this area.
Power and Controller connector
The controller / power cable only ts
one way.
BIO-BELT
Power and Controller
connector
Connect the controller /
power cable here.

7
Controller
Temperature adjustment
button
Press the Temp Up or Temp
Down button to increase or
decrease the temperature.
Temperature indication light
Indicates set temperature
(Temperature setting:
95° ~ 149°F / 35° ~ 65°C)
Power indication light
Indicates if the BIO-BELT is
OFF or ON.
Power button
Turn the belt OFF or ON
by pressing this button.

8
e n g l i s h
Product installation
Checklist before product installation
▪ Do not use the product in areas with high humidity or signicant dust.
▪ Handle the BIO-BELT with care. Any physical impact such as dropping the BIO-BELT can damage inter-
nal components.
▪ Check the voltage before turning on the BIO-BELT.
- Voltage for the product: 120V
- Electric shock or damage to the BIO-BELT can result from improper voltage.
- The BIO-BELT and the controller must be the same voltage.
(i.e. 120V BIO-BELT + 120V Controller / 220V BIO-BELT + 220V Controller)
▪Do not use the BIO-BELT if the plug, power cable, or power outlet has any damage. Always check for cuts
and scrapes to the power cable.
▪Do not pull on the power cord or controller when unplugging the BIO-BELT.
▪Use a dedicated outlet when operating the BIO-BELT. Problems may occur when sharing a power strip
with other devices.
Product installation
1. Connect the controller / power cable to the connection port of the BIO-BELT. To ensure a secure
connection, there should be no space between the connector and the outlet on the mat.
The connection may be tight at rst.
2. Plug the controller / power cable into an outlet. Make sure the controller is rated for the same volt-
age as the outlet.
NOTE: Use care when handling the controller / power cable to prevent accidental breakage. Do not
drop, stand on or place heavy objects on the controller / power cable. Never pull the power
cable to remove the plug from the receptacle, be sure to hold the plug.
<IMPROPER CONNECTION> <PROPER CONNECTION>

9
How to use the product
Turning ON and OFF
Check the following to make sure the BIO-BELT is operating properly.
The BIO-BELT can be used on the legs, arms, shoulders, and waist. Its small size makes it easy to trans-
port.
▪Please contact our Customer Service Center if the power indication light does not turn on
when the power is connected.
Caution
1. Turn the BIO-BELT on by pressing the Power button. The indicator light will turn on. Press the but-
ton again to turn off the BIO-BELT.
2. If the light does not turn on, check for any plug/power system problems.
3. Press the temperature adjustment button to see if it is working property. Contact our Customer
Service Center if the controller is not working properly.
4. The BIO-BELT will automatically turn off after 2 hours of continuous use. To continue using the belt,
turn it on again and set the temperature.

10
e n g l i s h
Adjusting the product’s temperature
1. When the power is turned on, press the [Temperature Up / Down] button to set the desired
temperature.
▪ Range of temperature: 95 ~ 149°F / 35 ~ 65°C
▪ Each time the temperature button is pressed, the temperature setting changes in increments of
9°F / 5°C.
2. When adjusting the temperature, the indicator light will change color depending on the temperature
selected. Once selected, the BIO-BELT will heat up to the proper temperature. If the button of the
controller is not working properly, please contact our Customer Service Center.
▪ Green: 95° ~ 104°F (35° ~ 40°C)
▪ Yellow: 113° ~ 131°F (45° ~ 55°C)
▪ Red: 140° ~ 149°F (60° ~ 65°C)
▪Do not place the BIO-BELT directly on your skin. Doing so may cause burns or injury to
your skin. Place a towel between the BIO-BELT and your skin during use.
Warning
3. Place the BIO-BELT around your legs, arms, shoulders, or waist with the gemstones faced
inward (gemstones are visible through the clear window). Adjust the strap to secure the BIO-
BELT. We recommend placing a towel between the BIO-BELT and your skin to prevent low
temperature burns.
4. Do not place the controller on the BIO-BELT when in use. Keep the controller away from the
BIO-BELT.
After using the product
- After using the BIO-BELT, turn it off by pressing the Power button.
- When the power is turned off, unplug the BIO-BELT from the outlet.

11
▪When not in use, turn off the power and unplug the BIO-BELT.
▪Before storing the BIO-BELT, be sure to turn it off and wait until it has cooled down.
▪Store the BIO-BELT lying flat (not folded) and in a well-ventilated area.
▪Unplug the controller from the BIO-BELT and place it in a bag.
▪Do not expose the device to water, rain or extreme humidity. It may cause electric shock or fire.
How to clean and store the product
How to clean the product
How to store the product
▪When cleaning the BIO-BELT, do not wash with water, submerge in water, or dry clean.
- Doing so may cause electric shock or a short circuit.
▪When cleaning the BIO-BELT, make sure to turn off the power and unplug it.
Caution
Product Storage/
Transportation
- Storage Temperature: 32 ~ 113°F / 0 ~ 45°C
- Transportation Temperature: -13 ~ 158°F / -25 ~ 70°C
- Humidity: 15 ~ 93%
- Air pressure: 700 ~ 1060 hPa
- Keep out of direct sunlight.
- Store in an area free of dust and humidity.
1. Unplug the BIO-BELT before cleaning it. Use a moist towel to remove any dust on the surface and
a soft dry fabric to clean the controller.
2. We recommend wiping the clear strip on the BIO-BELT once a month with a moist towel to maintain
good condition.
- Do not leave any moisture on the BIO-BELT after cleaning the product.
- If the BIO-BELT has any moisture or perspiration on it, use a dry towel to wipe it off.
3. Do not use detergents, solvents, or ammable chemicals when cleaning the BIO-BELT and controller.

12
e n g l i s h
Trouble shooting guide
If the alarm light on the controller ashes while using the BIO-BELT, stop using it immediately. Use the
trouble shooting guide to eliminate the problem. If recommended steps did not eliminate the problem and
the alarm light is still ashing, stop using the BIO-BELT and contact Customer Service.
Indicator Light Cause Resolution method
149°F light is ashing
BIO-BELT connection
is not secure
▪Check if the BIO-BELT cable is properly connected
to the controller.
Defective temperature
sensor
▪Temperature sensor wire is broken. Contact our
Customer Service Center.
Check before contacting customer service
If there is any malfunction during the use of the product, check the following contents before contacting
our Customer Service Center.
Symptom Resolution method
The power switch
is turned on but the
power indicator light is
not turned on.
▪Check if the power plug is securely connected to the outlet.
▪Check if the proper voltage is applied
▪Connect the power plug correctly, but if it still does not properly work,
contact our Customer Service Center.
The temperature is set
but the BIO-BELT is
not working.
▪Check if the BIO-BELT and the controller are correctly connected.
▪Turn off the power of the controller and separate the power cable and then
re-connect again.
▪Connect the power cable correctly, but if it still does not properly work,
contact our Customer Service Center.
During the use of the
BIO-BELT, the power
suddenly turns off.
▪Turn the power off and turn it on again.
The alarm light is on
and the BIO-BELT is
not working.
▪If the alarm light is on, turn off the power immediately and unplug the power
cable from the power outlet and then contact our Customer Service Center.

13
Product specifications
Category Contents
Product BIO-BELT
Product size
210 x 460 mm
1) main body of the BIO-BELT containing semi-precious stones:
Length 46 cm x width 21 cm
2) Total length including the belt: 140cm (Regular) or 160cm (XL)
Weight or packing unit
1) Controller: 0.38 KG
2) Main body of the belt: 0.93KG
3) Overall weight: 1.6 KG
Maximum temperature 149°F / 65°C (The BIO-BELT is programmed to prevent overheating.)
Voltage, frequency,
power consumption
120V~, 60Hz, 50W
Operating temperature : 95 ~ 149°F / 35 ~ 65°C
Variance: +/- 9°F / 5°C
Type of protection against
electric shock Class II ME equipment
Degree of protection against
electric shock
Class BF applied parts
- Applied parts: Top of Mat
Degree of protection against
harmful ingress of water
Ordinary equipment (IPX0)
- Equipment not suitable for use in presence of a ammable anesthetic
mixture with air or with oxygen or nitrous oxide.
Mode of operation Continuous operation
※The BIO-BELT will automatically turn off after 2 hours.
Class II ME equipment (single fault safe)
Normal Mode Single Fault Mode
Touch Current < 100 microA < 500 microA
Ground Leakage Current < 5 mA < 10 mA
Testing in accordance with IEC 60601-1-2 indicates the following:
The BIO-BELT needs no special precautions regarding EMC and needs to be installed and put into service.
Portable and mobile RF communications equipment have no adverse effects on the BIO-BELT.

14
e n g l i s h
Product label is attached to the bottom of the BIO-BELT and the controller.
Label location on the BIO-BELT Label location on the controller.
Product manufacturing information

15
Front
BIO-BELT product
Side

16
e n g l i s h
Customer service information
If your BIO-BELT is not working properly call our Customer Service Center.
CUSTOMER SERVICE CENTER
North America
Richway & Fuji Bio Inc.
Tel: [phone]
Toll-Free: 1-855-338-6410 (USA, Canada, Guam, Saipan)
Homepage: www.richwayandfujibio.com
Email: [email protected]

Order information
Product name BIO-BELT Model name
Warranty
period Limited 3 years from the date of product delivery Manufacturing number
Date of
purchase Branch of purchase
Customer
information Name Purchase price
Product warranty
RICHWAY & FUJI BIO INC.
1314 South King Street Suite 520, Honolulu, HI 96814 USA
Tel: [phone] / Toll-Free: 1-855-338-6410
Homepage: www.richwayandfujibio.com
Richway & Fuji Bio warrants the covered product to be free from defects and malfunctions
at the time sold. “Defects” as used in this warranty, is dened as imperfections, which im-
pair or impede the function and use of the product.
How Long the Warranty Lasts
This limited warranty lasts 3 years from the date of delivery. This warranty extends to the original purchaser
only. Coverage terminates if you sell or otherwise transfer ownership.
What This Warranty Covers
This warranty covers any defects or malfunctions in the electronic components, heating element, and top cover
replacement. If Richway & Fuji Bio determines that such goods are defective, within the period of this warranty,
Richway & Fuji Bio will repair or replace the parts free of charge for the rst year. Repair or replacement for the
second and third year requires a fee, which can be found on our website. Repair or replacement is the sole and
exclusive remedy available to the buyer, and shall constitute the fulllment of all Richway & Fuji Bio obligations
in respect to the goods furnished under this agreement.
What This Warranty Does Not Cover
This warranty does not cover abuse, misuse, natural disaster, insufcient or excessive electrical supply, ordi-
nary wear, fading, failure to follow instructions and improper maintenance. Richway & Fuji Bio shall not be liable
for any incidental or consequential damages as a direct result of negligence or misuse. This warranty does
not extend to the purchase of opened, used, repaired, repackaged, and/or resealed products, including but not
limited to sale of such products on internet sites and/or sales of such products on internet auction sites and/
or sales of such products by surplus or bulk resalers. Any and all warranties or guarantees shall immediately
cease and terminate as to any products or parts thereof which are repaired, replaced, altered, or modied,
without the prior express and written consent of Richway & Fuji Bio.
How to Get Service
To obtain service under this warranty, contact your local Customer Service Center and provide the purchaser’s
name, RI (Richway Invoice) number, and a detailed description of the problem you are experiencing. They will
provide you with a return merchandise authorization number (RMA). This number is required and must be placed
in a visible area on the front of the package. Ship your product postage paid, include a copy of the original sales
slip, credit card receipt or other proof of the date of the original retail purchase. If servicing within the rst two (2)
months, we will send you a prepaid shipping label to cover your shipping costs. If servicing from the third month
and on, the customer is responsible for shipping costs to return the product for repair or replacement. We will
cover the shipping costs to return the product back to the customer.
How Do State Laws Apply
This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
Any implied warranties last the duration of this warranty. Some states do not allow limitations on how long an
implied warranty lasts and some states do not allow the exclusion or limitation of incidental or consequential
damages, so the limitations or exclusions may not apply to you.
Précautions en matière de sécurité..........................................................................19
Avertissement ....................................................................................................................... 19
Avertissement ....................................................................................................................... 19
Contre-indications................................................................................................................. 20
Instructions d’utilisation......................................................................................................... 21
Veuillez lire avant d’utiliser le produit ......................................................................22
Composantes du produit ...................................................................................................... 22
Description du produit........................................................................................................... 23
Installation du produit ................................................................................................25
Liste de vérication avant d’installer le produit .................................................................... 25
Installation du produit............................................................................................................ 25
Comment utiliser le produit.......................................................................................26
Allumer ou Éteindre (ON ou OFF) ....................................................................................... 26
Ajuster la température du produit......................................................................................... 27
Après avoir utilisé le produit.................................................................................................. 27
Comment nettoyer et ranger le produit ...................................................................28
Comment nettoyer le produit................................................................................................ 28
Comment ranger le produit................................................................................................... 28
Guide de dépannage...................................................................................................29
Vériez avant de communiquer avec le service à la clientèle ............................................ 29
Caractéristiques du produit.......................................................................................30
Renseignements concernant la fabrication du produit........................................................ 31
Renseignements sur le Service à la clientèle.........................................................33
Garantie du produit.....................................................................................................34

18
f r a n ç a i s
Contenu
Précautions en matière de sécurité..........................................................................19
Avertissement ....................................................................................................................... 19
Avertissement ....................................................................................................................... 19
Contre-indications................................................................................................................. 20
Instructions d’utilisation......................................................................................................... 21
Veuillez lire avant d’utiliser le produit ......................................................................22
Composantes du produit ...................................................................................................... 22
Description du produit........................................................................................................... 23
Installation du produit ................................................................................................25
Liste de vérication avant d’installer le produit .................................................................... 25
Installation du produit............................................................................................................ 25
Comment utiliser le produit.......................................................................................26
Allumer ou Éteindre (ON ou OFF) ....................................................................................... 26
Ajuster la température du produit......................................................................................... 27
Après avoir utilisé le produit.................................................................................................. 27
Comment nettoyer et ranger le produit ...................................................................28
Comment nettoyer le produit................................................................................................ 28
Comment ranger le produit................................................................................................... 28
Guide de dépannage...................................................................................................29
Vériez avant de communiquer avec le service à la clientèle ............................................ 29
Caractéristiques du produit.......................................................................................30
Renseignements concernant la fabrication du produit........................................................ 31
Renseignements sur le Service à la clientèle.........................................................33
Garantie du produit.....................................................................................................34

19
Précautions en matière de sécurité
AVERTISSEMENT :
Utilisez avec soin. Peut entraîner de graves brûlures. Ne pas utiliser sur
des zones de peau extrêmement sensibles ou lorsqu’il y a une mauvaise
circulation. L’utilisation sans surveillance du BIO-BELT par les enfants ou
les personnes souffrant d’une incapacité peut s’avérer dangereuse. Le
BIO-BELT est un appareil médical qui devrait uniquement être utilisé par
un adulte compétent. Les personnes âges et les personnes qui souffrent
de problèmes de mobilité doivent être supervisées.
- Ne pas modier, changer ou démonter le produit. Ceci pourrait entraîner un mauvais fonction-
nement du produit et produire un choc électrique et un feu.
- Assurez-vous d’utiliser le bon voltage pour votre pays. Le mauvais voltage peut engendrer un
choc électrique, un feu ou des dommages au produit.
- Veillez à ce que le connecteur soit bien branché à la prise de courant avant de faire fonction-
ner l’appareil.
- Si une panne de courant survient, éteignez l’alimentation et débranchez la prise.
- Si le BIO-BELT prend feu ou commence à fumer, éteignez et débranchez l’appareil. Signalez
le problème à notre Centre de service à la clientèle.
- Ne laissez pas les enfants sans surveillance à proximité du BIO-BELT. La perte de vie ou des
blessures graves peuvent survenir si un enfant entoure le cordon d’alimentation autour de son
cou ou bien trébuche par dessus le cordon d’alimentation.
Veuillez lire et suivre les instructions qui se trouvent dans ce manuel. L’utilisation appropriée du BIO-
BELT empêchera les blessures à l’utilisateur et les dommages à la propriété privée.
AVERTISSEMENT :
Des dommages matériels, un mauvais fonctionnement de l’appareil ou
des blessures peuvent survenir si les instructions suivantes ne sont pas
suivies à la lettre. Si vous ne vous sentez pas bien suivant l’utilisation du
BIO-BELT, arrêtez l’utilisation et consultez un médecin. Utilisez unique-
ment le BIO-BELT pour une thermothérapie. Si l’appareil ne fonctionne
pas correctement, veuillez arrêter l’utilisation et communiquer avec le
Service à la clientèle.
- Ne pas modier ou altérer le BIO-BELT.
- Ne pas sauter, vous tenir debout ou placer des objets lourds sur le BIO-BELT.
- Ne pas placer la manette sur le BIO-BELT lorsque vous utilisez celui-ci. Gardez la manette
loin du BIO-BELT.
- Ne placez pas le BIO-BELT sur les surfaces sensibles aux températures (p.ex: le cuir).
- Ne couvrez pas la manette. Ceci pourrait entraîner une surchauffe de la manette.
- Ne pas xer le BIO-BELT avec des articles en métal comme des épingles.
- Ne pas faire tomber, lancer ou maltraiter la manette du BIO-BELT.