AIR Series
Riedel Communications’ AIR series headset is the ideal light weight, low
prole headset for customers who place great demands on quality, design and
comfortable wearing.
Replacing the Ear Cushion
Hold the earpiece and pull the
cushion off. Place the new cushion
on the earpiece and click it carefully
into place.
The specially engineered DuPont
CoolMax® bers used in Riedel’s ear
cushions provide great breathability
and comfortable wearing.
Personalization
You can put a name plate in the inside of the headband. Just lift the plastic cover,
insert your label, and click it back into place.
Pin Out
XLR 4F
Black GND / Screen 1
Red Microphone 2
Blue Speaker - 3
White Speaker + 4
Specications
Headphone AIR (E1/E2) AIR (D1/D2)
Transducer type Dynamic, open Dynamic, open
Frequency response 100 Hz – 18 kHz 100 Hz – 18 kHz
Impedance 150 Ω 1 mW/1 kHz 150 Ω 1 mW/1 kHz
Characteristic SPL 91 dB 1 mW/1 kHz 91 dB 1 mW/1 kHz
Microphone
Transducer type NC Electret NC Dynamic
Polar pattern Bi-Directional Hypercardioid
Frequency response 150 Hz – 15 kHz 150 Hz – 10 kHz
Nominal Impedance >1600 Ω 200 Ω
Supply voltage 4.5 V 400 µA ---
Sensitivity -51 dB +/-2 dB
(0 dB=1 V/Pa, 1 kHz)
-62 dB +/-4 dB
(0 dB=1 V/Pa, 1 kHz)
Spare Parts and Service
Please contact your local dealer or Riedel Service (www.riedel.net) for spare parts
and/or service enquiries.
Manufacture Declaration
CE Approval
Riedel Communications declares that this device is in compliance with the
applicable CE standards and regulations.
WEEE Declaration
Please dispose of this product by bringing it to your local collection point or
recycling center.
