RightHand RHTIMBRJCK User manual

TIMBERJACK
USER GUIDE
MODEL # RHTIMBRJCK
Thank you for purchasing the Right Hand™Timberjack. This User Guide is intended to provide you with guidelines
to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform
to the guidelines described in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for reference. This product is intended for
domestic use only. This product is not intended for commercial use.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty
for details.
SAFETY PRECAUTIONS
• Always wear ANSI-approved safety glasses with protective hand and foot gear at all times while using
this product.
• Make sure to keep this product clean by using a damp cloth to wipe it down. Do not use abrasive cleaners as
this could damage parts of the product.
• This product is only intended for outdoor use. Do not attempt to use this product indoors.
• Always use appropriate care when stacking and/or transporting logs.
• Always ensure that all pieces are present and intact before attempting to assemble or use the product. DO
NOT use this product if any parts are damaged or missing. Contact customer care for replacement parts.
• This timberjack is designed exclusively for logs from 3" to 15" (7.62 cm – 38.1 cm) in diameter.
• While this timberjack can make it easier independently lifting, moving, and cutting large logs, we recommend
that you still use a second person to spot you while doing anything that requires any heavy lifting or that can
cause injury.
• Be sure to tighten all nuts and bolts prior to using the timberjack for the first time, and check them periodically
to make sure they haven’t come loose.
• Ensure that the steel handle is firmly threaded into the tube body to avoid sliding off the handling. Incomplete
assembly can cause logs to slip and fall out of the jack, causing damage and/or serious injury to the user or
surrounding area.
1

PACKAGE CONTENTS & PRODUCT OVERVIEW
1. Hardware kit (1)
a. M10 x 40 bolts – 4 pcs.
b. M10 lock nuts – 4 pcs.
c. M8 Clevis pin with cotter pin – 1 pc.
2. Front handle (1)
3. Hook (1)
4. Stand (1)
5. Cross support (1)
6. Rear handle (3)
ASSEMBLY INSTRUCTIONS
1. Remove all contents from the packaging, ensuring all parts are present and intact.
2. Connect the front handle (2) and the rear handle (6) by inserting the screw into the corresponding threading
and turning clockwise until fully tightened.
3. Attach the hook (3) to the hook mount on the front handle (2) by inserting the hook (3) into the
slot on top of the handle, and then securing it with one (1) M10 x 40 bolts and lock nuts (1a, 1b).
4. Attach the stand (4) to the front handle (2) by inserting it into the slot on the bottom of the handle and
attaching it with one (1) M10 x 40 bolt and lock nut (1a, 1b). Connect the cross support (5) to the bottom of
the stand (4) and to the slot on the front handle (2) as shown, using two (2) M10 x 40 bolts and lock
nuts (1a, 1b).
5. Fully tighten all connections before use.
2
6
5
3
2
1b
1c
1a
4
Fully assembled

Right Hand is a trademark of C&A IP Holdings, LLC, in the U.S.
Distributed by C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837 Made in China. © 2020. C&A IP Holdings, LLC. All Rights Reserved.
QUESTIONS OR PROBLEMS? CONTACT US!
[e-mail] | 1-833-665-2121
3
LIMITED WARRANTY ON RIGHT HAND™TIMBERJACK
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH
VARY FROM STATE TO STATE.
WE WARRANT THAT DURING THE WARRANTY PERIOD, THE PRODUCT WILL BE FREE FROM DEFECTS IN MATERI-
ALS AND WORKMANSHIP.
LIMITATION OF LIABILITY
TO THE EXTENT NOT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRAN-
TIES, ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED. EXCEPT FOR THE EXPRESS WARRANTIES CONTAINED
IN THIS LIMITED WARRANTY STATEMENT AND TO THE EXTENT NOT PROHIBITED BY LAW, WE DISCLAIM ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION,
THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME STATES DO NOT
ALLOW DISCLAIMERS OF IMPLIED WARRANTIES, SO THIS DISCLAIMER MAY NOT APPLY TO YOU. TO THE EXTENT
SUCH WARRANTIES CANNOT BE DISCLAIMED UNDER THE LAWS OF YOUR JURISDICTION, WE LIMIT THE
DURATION AND REMEDIES OF SUCH WARRANTIES TO THE DURATION OF THIS EXPRESS LIMITED WARRANTY.
OUR RESPONSIBILITY FOR DEFECTIVE GOODS IS LIMITED TO REPAIR, REPLACEMENT OR REFUND AS DESCRIBED
BELOW IN THIS WARRANTY STATEMENT.
WHO MAY USE THIS WARRANTY? C&A Marketing, Inc. located at 114 Tived Lane East, Edison, NJ (“we”) extend
this limited warranty only to the consumer who originally purchased the product (“you”). It does not extend to any
subsequent owner or other transferee of the product.
WHAT DOES THIS WARRANTY COVER? This limited warranty covers defects in materials and workmanship of the
Right Hand™Timberjack (the “product”) for the Warranty Period as defined below.
WHAT DOES THIS WARRANTY NOT COVER? This limited warranty does not cover any damage due to: (a) transpor-
tation; (b) storage; (c) improper use; (d) failure to follow the product instructions or to perform any preventive maintenance;
(e) modifications; (f) unauthorized repair; (g) normal wear and tear; or (h) external causes such as accidents, abuse, or other
actions or events beyond our reasonable control.
WHAT IS THE PERIOD OF COVERAGE? This limited warranty starts on the date of your purchase and lasts for one
year (the “Warranty Period”). The Warranty Period is not extended if we repair or replace the product. We may change
the availability of this limited warranty at our discretion, but any changes will not be retroactive.
WHAT ARE YOUR REMEDIES UNDER THIS WARRANTY? With respect to any defective product during the
Warranty Period, we will, at our sole discretion, either: (a) repair or replace such product (or the defective part) free of
charge or (b) refund the purchase price of such product if an exchange unit cannot be provided.
HOW DO YOU OBTAIN WARRANTY SERVICE? To obtain warranty service, you must contact us at 1-833-665-2121
or by email at [e-mail] during the Warranty Period to obtain a Defective Merchandise Authorization
(“DMA”) number. No warranty service will be provided without a DMA number and return shipping costs to our facilities
shall be assumed by you, the purchaser. Shipping costs of the replacement unit to you shall be assumed by us.