Rigol DSA1000 Series Operating instructions

FAQ
Instrument Solution – FAQ
Solution Title
Troubleshooting DSA1000 LAN Connections
Date:01.24.2012
Solution: Communicating over LAN to the DSA series is straightforward. Here are
some things to try if you are having difficu ty:
1. Make sure Ethernet cab e is connected proper y and that the switch/hubs in
the network configuration are operating proper y.
•The green LED on the back of the DSA shou d disp ay a so id
i umination when the connection is made.
•The ye ow LED on the back of the DSA shou d b ink when data is sent
and received.
2. The DSA defau ts to communicate over USB. To configure the instrument
for Ethernet, fo ow these steps:
•Press System > I/O Setting > Remote I/O and togg e to LAN

•Press System to Exit the menu
3. Find LAN configuration and make sure it matches your instrument settings
•Press System > I/O Setting > LAN

•Record the IP Address, Subnet Mask, and Gateway

•Open a web browser (Chrome, Internet Exp orer, etc..) and type the IP
address into the address bar at the top.
•If everything is configured correct y, the DSA's webpage wi oad