Rigol MSO5000-E Series User manual

User Guide
MSO5000-E Series Digital
Oscilloscope
May. 2020
RIGOL TECHNOLOGIES CO., LTD.

RIGOL
MSO5000-E User Guide I
Guaranty and Declaration
Copyright
© 2020 RIGOL TECHNOLOGIES CO., LTD. All Rights Reserved.
Trademark Information
RIGOL®is the trademark of RIGOL TECHNOLOGIES CO., LTD.
Publication Number
UGA28102-1110
Software Version
00.01.02.00.05
Software upgrade might change or add product features. Please acquire the latest
version of the manual from RIGOL website or contact RIGOL to upgrade the
software.
Notices
⚫RIGOL products are covered by P.R.C. and foreign patents, issued and pending.
⚫RIGOL reserves the right to modify or change parts of or all the specifications
and pricing policies at the company’s sole decision.
⚫Information in this publication replaces all previously released materials.
⚫Information in this publication is subject to change without notice.
⚫RIGOL shall not be liable for either incidental or consequential losses in
connection with the furnishing, use, or performance of this manual, as well as
any information contained.
⚫Any part of this document is forbidden to be copied, photocopied, or rearranged
without prior written approval of RIGOL.
Product Certification
RIGOL guarantees that this product conforms to the national and industrial
standards in China as well as the ISO9001:2015 standard and the ISO14001:2015
standard. Other international standard conformance certifications are in progress.
Contact Us
If you have any problem or requirement when using our products or this manual,
please contact RIGOL.
E-mail: servi[email protected]m
Website: www.rigol.com

RIGOL
II MSO5000-E User Guide
Safety Requirement
General Safety Summary
Please review the following safety precautions carefully before putting the
instrument into operation so as to avoid any personal injury or damage to the
instrument and any product connected to it. To prevent potential hazards, please
follow the instructions specified in this manual to use the instrument properly.
Use Proper Power Cord.
Only the exclusive power cord designed for the instrument and authorized for use
within the local country could be used.
Ground the Instrument.
The instrument is grounded through the Protective Earth lead of the power cord. To
avoid electric shock, connect the earth terminal of the power cord to the Protective
Earth terminal before connecting any input or output terminals.
Connect the Probe Correctly.
If a probe is used, the probe ground lead must be connected to earth ground. Do not
connect the ground lead to high voltage. Improper way of connection could result in
dangerous voltages being present on the connectors, controls or other surfaces of
the oscilloscope and probes, which will cause potential hazards for operators.
Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markers on the instrument and
check your manual for more information about ratings before connecting the
instrument.
Use Proper Overvoltage Protection.
Ensure that no overvoltage (such as that caused by a bolt of lightning) can reach the
product. Otherwise, the operator might be exposed to the danger of an electric
shock.
Do Not Operate Without Covers.
Do not operate the instrument with covers or panels removed.
Do Not Insert Objects into the Air Outlet.
Do not insert anything into the holes of the fan to avoid damaging the instrument.
Use Proper Fuse.
Please use the specified fuses.

RIGOL
MSO5000-E User Guide III
Avoid Circuit or Wire Exposure.
Do not touch exposed junctions and components when the unit is powered on.
Do Not Operate with Suspected Failures.
If you suspect that any damage may occur to the instrument, have it inspected by
RIGOL authorized personnel before further operations. Any maintenance,
adjustment or replacement especially to circuits or accessories must be performed
by RIGOL authorized personnel.
Provide Adequate Ventilation.
Inadequate ventilation may cause an increase of temperature in the instrument,
which would cause damage to the instrument. So please keep the instrument well
ventilated and inspect the air outlet and the fan regularly.
Do Not Operate in Wet Conditions.
To avoid short circuit inside the instrument or electric shock, never operate the
instrument in a humid environment.
Do Not Operate in an Explosive Atmosphere.
To avoid personal injuries or damage to the instrument, never operate the
instrument in an explosive atmosphere.
Keep Product Surfaces Clean and Dry.
To avoid dust or moisture from affecting the performance of the instrument, keep the
surfaces of the instrument clean and dry.
Prevent Electrostatic Impact.
Operate the instrument in an electrostatic discharge protective environment to avoid
damage induced by static discharges. Always ground both the internal and external
conductors of cables to release static before making connections.
Use the Battery Properly.
Do not expose the battery (if available) to high temperature or fire. Keep it out of the
reach of children. Improper change of a battery (lithium battery) may cause an
explosion. Use the RIGOL specified battery only.
Handle with Caution.
Please handle with care during transportation to avoid damage to keys, knobs,
interfaces, and other parts on the panels.

RIGOL
IV MSO5000-E User Guide
Safety Notices and Symbols
Safety Notices in this Manual:
WARNING
Indicates a potentially hazardous situation or practice which, if not
avoided, will result in serious injury or death.
CAUTION
Indicates a potentially hazardous situation or practice which, if not
avoided, could result in damage to the product or loss of important data.
Safety Terms on the Product:
DANGER
It calls attention to an operation, if not correctly performed, could
result in injury or hazard immediately.
WARNING
It calls attention to an operation, if not correctly performed, could
result in potential injury or hazard.
CAUTION
It calls attention to an operation, if not correctly performed, could
result in damage to the product or other devices connected to the
product.
Safety Symbols on the Product:
Hazardous
Voltage
Safety Warning
Protective Earth
Terminal
Chassis Ground
Test Ground

RIGOL
MSO5000-E User Guide V
Measurement Category
Measurement Category
MSO5000-E series digital oscilloscopes can make measurements in Measurement
Category I.
WARNING
This oscilloscope can only be used for measurements within its specified
measurement categories.
Measurement Category Definitions
Measurement category I is for measurements performed on circuits not directly
connected to MAINS. Examples are measurements on circuits not derived from
MAINS, and specially protected (internal) MAINS derived circuits. In the latter case,
transient stresses are variable. Thus, you must know the transient withstand
capability of the equipment.
Measurement category II is for measurements performed on circuits directly
connected to low voltage installation. Examples are measurements on household
appliances, portable tools and similar equipment.
Measurement category III is for measurements performed in the building installation.
Examples are measurements on distribution boards, circuit-breakers, wiring
(including cables, bus-bars, junction boxes, switches and socket-outlets) in the fixed
installation, and equipment for industrial use and some other equipment. For
example, stationary motors with permanent connection to a fixed installation.
Measurement category IV is for measurements performed at the source of a
low-voltage installation. Examples are electricity meters and measurements on
primary overcurrent protection devices and ripple control units.
Ventilation Requirement
This oscilloscope uses a fan to force cooling. Please make sure that the air intake and
exhaust areas are free from obstructions and have free air. When using the
oscilloscope in a bench-top or rack setting, provide at least 10 cm clearance beside,
above and behind the instrument for adequate ventilation.
WARNING
Inadequate ventilation may cause an increase of temperature in the
instrument, which would cause damage to the instrument. So please
keep the instrument well ventilated and inspect the air outlet and the fan
regularly.

RIGOL
VI MSO5000-E User Guide
Working Environment
Temperature
Operating: 0℃to +50℃
Non-operating: -30℃to +70℃
Humidity
Operating:
Below +30℃: ≤95%RH (without condensation)
+30℃to +40℃: ≤75%RH (without condensation)
+40℃to +50℃: ≤45%RH (without condensation)
Non-operating:
Below 65℃: ≤95% RH (without condensation)
WARNING
To avoid short circuit inside the instrument or electric shock, never
operate the instrument in a humid environment.
Altitude
Operating: below 3 km
Non-operating: below 15 km
Installation (Overvoltage) Category
This product is powered by mains conforming to installation (overvoltage) category
II.
WARNING
Ensure that no overvoltage (such as that caused by a bolt of lightning)
can reach the product. Otherwise, the operator might be exposed to the
danger of an electric shock.
Installation (Overvoltage) Category Definitions
Installation (overvoltage) category I refers to signal level which is applicable to
equipment measurement terminals connected to the source circuit. Among these
terminals, precautions are done to limit the transient voltage to a low level.
Installation (overvoltage) category II refers to the local power distribution level
which is applicable to equipment connected to the AC line (AC power).
Pollution Degree
Pollution Degree 2
Pollution Degree Definition

RIGOL
MSO5000-E User Guide VII
Pollution Degree 1: No pollution or only dry, nonconductive pollution occurs. The
pollution has no effect. For example, a clean room or air-conditioned office
environment.
Pollution Degree 2: Normally only nonconductive pollution occurs. Temporary
conductivity caused by condensation is to be expected. For example, indoor
environment.
Pollution Degree 3: Conductive pollution or dry nonconductive pollution that
becomes conductive due to condensation occurs. To be found in industrial
environment or construction sites (harsh environments). For example, sheltered
outdoor environment.
Pollution Degree 4: The pollution generates persistent conductivity caused by
conductive dust, rain, or snow.
For example, outdoor areas.
Safety Class
Class 1 –Grounded Product
Care and Cleaning
Care
Do not store or leave the instrument where it may be exposed to direct sunlight for
long periods of time.
Cleaning
Clean the instrument regularly according to its operating conditions.
1. Disconnect the instrument from all power sources.
2. Clean the external surfaces of the instrument with a soft cloth dampened with
mild detergent or water. Avoid having any water or other objects into the chassis
via the heat dissipation hole. When cleaning the LCD, take care to avoid
scarifying it.
CAUTION
To avoid damage to the instrument, do not expose it to caustic liquids.
WARNING
To avoid short-circuit resulting from moisture or personal injuries, ensure
that the instrument is completely dry before connecting it to the power
supply.

RIGOL
VIII MSO5000-E User Guide
Environmental Considerations
The following symbol indicates that this product complies with the WEEE Directive
2002/96/EC.
Product End-of-Life Handling
The equipment may contain substances that could be harmful to the environment or
human health. To avoid the release of such substances into the environment and
avoid harm to human health, we recommend you to recycle this product
appropriately to ensure that most materials are reused or recycled properly. Please
contact your local authorities for disposal or recycling information.
You can click on the following link
http://www.rigol.com/Files/RIGOL_RoHS2.0&WEEE.pdf to download the latest
version of the RoHS&WEEE certification file.

RIGOL
MSO5000-E User Guide IX
MSO5000-E Series Overview
MSO5000-E series digital oscilloscope is a high-performance oscilloscope model
designed based on RIGOL UltraVision II technology. With a 9-inch capacitive
multi-touch screen, the MSO5000-E series integrates 7 independent instruments into
one, delivering super sample bandwidth ratio, extremely high memory depth, and
other excellent specifications. It is compact and portable in design, and all of the
MSO series products support multiple channels, and the upgrade of the analysis
software. As it integrates many functions of multiple instruments, different user
groups can have more choices in selecting their desired product based on their needs,
helping them save their budget to a large extent while enjoying the superior test
support and user experience.
Main Features:
⚫Analog bandwidth: 150 MHz
⚫2 analog channels, 1 EXT channel, standard configuration of 16 digital channels
(probe option is required to be ordered)
⚫Up to 4 GSa/s real-time sample rate
⚫Up to 100 Mpts memory depth (option)
⚫High waveform capture rate (over 300,000 wfm/s)
⚫Auto measurement of 41 waveform parameters; full-memory hardware
measurement function
⚫A variety of serial protocol triggers and decodes
⚫Up to 450,000 frames of hardware real-time and ceaseless waveforms recording
and playing functions
⚫Independent search, navigation keys, and event table
⚫Built-in advanced power analysis software (option)
⚫Bode plot for loop test analysis
⚫Integrates 7 independent instruments into 1, including a digital oscilloscope, a
logic analyzer, a spectrum analyzer, an Arbitrary Waveform Generator, a digital
voltmeter, a frequency counter and totalizer, and a protocol analyzer
⚫9-inch capacitive multi-touch screen, 256-level intensity grading display, with
color persistence
⚫Multiple interfaces available: USB HOST & DEVICE, LAN(LXI), HDMI, TRIG OUT,
and USB-GPIB
⚫Web Control remote command
⚫Unique online version upgrade
⚫Novel and delicate industrial design, easy to operate

RIGOL
XMSO5000-E User Guide
Document Overview
Main Topics of this Manual:
Chapter 1 Quick Start
Introduces the preparations before using the oscilloscope and provides a basic
introduction of the instrument.
Chapter 2 To Set the Vertical System
Introduces the vertical system functions of the oscilloscope.
Chapter 3 To Set the Horizontal System
Introduces the horizontal system functions of the oscilloscope.
Chapter 4 To Set the Sample System
Introduces the sample system functions of the oscilloscope.
Chapter 5 To Trigger the Oscilloscope
Introduces the trigger mode, trigger coupling, trigger holdoff, external trigger, and
various trigger types of the oscilloscope.
Chapter 6 Operations and Measurements
Introduces how to make math operation, auto measurement, and cursor
measurement.
Chapter 7 Digital Voltmeter (DVM) and Frequency Counter
Introduces how to use the digital voltmeter and the frequency counter.
Chapter 8 Power Analysis (Option)
Introduces the power quality and output ripple noise of the input power.
Chapter 9 Histogram Analysis
Introduces the histogram analysis function.
Chapter 10 Digital Channel
Introduces how to use the digital channels of the mixed signal digital oscilloscope.
Chapter 11 Protocol Decoding
Introduces how to decode the input signal by using those common protocols.
Chapter 12 Reference Waveform
Introduces how to compare the input waveform with the reference waveform.
Chapter 13 Pass/Fail Test
Introduces how to monitor the input signal by using the Pass/Fail test.

RIGOL
MSO5000-E User Guide XI
Chapter 14 Waveform Recording & Playing
Introduces the waveform recording & playing function.
Chapter 15 Search and Navigation Function
Introduces the navigation function and how to quickly search the relevant events.
Chapter 16 Display Control
Introduces how to control the display of the oscilloscope.
Chapter 17 Function/Arbitrary Waveform Generator (Option)
Introduces how to use the built-in Function/Arbitrary Waveform Generator option.
Chapter 18 Store and Load
Introduces how to store and load the measurement results and the setting of the
oscilloscope.
Chapter 19 Bode Plot
Introduces the Bode function and its related parameter setting.
Chapter 20 System Utility Function Setting
Introduces how to set the remote interfaces and system-related functions.
Chapter 21 Remote Control
Introduces how to control the oscilloscope remotely.
Chapter 22 Troubleshooting
Introduces how to deal with the common failures of the oscilloscope.
Chapter 23 Appendix
Provides the basic information for the options and accessories.

RIGOL
XII MSO5000-E User Guide
Format Conventions in this Manual:
1. Key
The key on the front panel is denoted by the format of "Key Name (Bold) + Text
Box" in the manual. For example, Utility denotes the "Utility" key.
2. Menu
The menu items are denoted by the format of "Menu Word (Bold) + Character
Shading". For example, System denotes the "System" menu item under
Utility.
3. Operation Procedures:
→denotes the next step of operation. For example, Utility →System denotes
that first press Utility, and then press the System key.
4. Connector:
The connectors on the front or rear panel are usually denoted by the format of
"Connector Name (Bold) + Square Brackets (Bold)". For example, [TRIG OUT].
5. Knob
Label
Knob
Label
Knob
Horizontal SCALE
Horizontal
Timebase Knob
Vertical SCALE
Vertical Scale
Knob
Horizontal POSITION
Horizontal
Position Knob
Vertical
OFFSET
Vertical
Offset Knob
Trigger LEVEL
Trigger Level
Knob
Multifunction
Knob
Content Conventions in this Manual:
MSO5000-E series includes the following models. Unless otherwise specified, this
manual takes MSO5152-E as an example to illustrate the functions and operation
methods of MSO5000-E series.
Model
Max. Analog
Bandwidth
No. of Analog
Channels
No. of
Function/Arbitrary
Waveform
Generator Channels
No. of Digital
Channels
MSO5152-E
150 MHz
2
1, Opt.
16 (Required
to purchase
the probe)
Manuals of this Product:
Quick Guide, User Guide, Programming Guide, Data sheet, etc. For the latest version
of this manual, download it from the official website of RIGOL (www.rigol.com).

Contents RIGOL
MSO5000-E User Guide XIII
Contents
Guaranty and Declaration .........................................................................I
Safety Requirement ................................................................................ II
General Safety Summary...........................................................................II
Safety Notices and Symbols...................................................................... IV
Measurement Category ............................................................................. V
Ventilation Requirement ............................................................................ V
Working Environment .............................................................................. VI
Care and Cleaning ..................................................................................VII
Environmental Considerations.................................................................VIII
MSO5000-E Series Overview.................................................................. IX
Document Overview................................................................................. X
Chapter 1 Quick Start .......................................................................1-1
General Inspection ................................................................................ 1-2
Appearance and Dimensions................................................................... 1-3
To Prepare for Use................................................................................. 1-4
To Adjust the Supporting Legs.......................................................... 1-4
To Connect to AC Power .................................................................. 1-4
Turn-on Checkout ........................................................................... 1-5
To Connect the Probe...................................................................... 1-5
Function Inspection......................................................................... 1-8
Probe Compensation ....................................................................... 1-9
Front Panel Overview............................................................................1-10
Rear Panel Overview.............................................................................1-11
Front Panel Function Overview...............................................................1-13
Vertical .........................................................................................1-13
Horizontal .....................................................................................1-14
Trigger..........................................................................................1-15
Function Menu...............................................................................1-15
Navigation Control Key ...................................................................1-16
Quick Key (Shortcut Key)................................................................1-16
Function/Arbitrary Waveform Generator Setting ................................1-16
Clear ............................................................................................1-17
Auto .............................................................................................1-17
RUN/STOP ....................................................................................1-17
Single ...........................................................................................1-17
Touch Lock Key..............................................................................1-17
Default .........................................................................................1-17
Multifunction Knob .........................................................................1-18
User Interface......................................................................................1-19
Touch Screen Controls ..........................................................................1-22
Tap...............................................................................................1-23

RIGOL Contents
XIV MSO5000-E User Guide
Pinch & Stretch .............................................................................1-23
Drag.............................................................................................1-23
Rectangle Drawing......................................................................... 1-24
Parameter Setting Method..................................................................... 1-26
To Use the Kensington Security Lock ......................................................1-27
To Use the Built-in Help System............................................................. 1-28
To View the Option Information and the Option Installation...................... 1-29
Chapter 2 To Set the Vertical System ............................................... 2-1
To Enable or Disable the Analog Channel..................................................2-2
To Adjust the Vertical Scale .....................................................................2-3
Vertical Expansion ..................................................................................2-4
To Adjust the Vertical Offset ....................................................................2-4
Channel Coupling ...................................................................................2-5
Bandwidth Limit.....................................................................................2-5
Probe Ratio ...........................................................................................2-6
Input Impedance ...................................................................................2-7
Waveform Invert....................................................................................2-7
Amplitude Unit.......................................................................................2-8
Channel Delay .......................................................................................2-8
Offset Cal ..............................................................................................2-9
Channel Label...................................................................................... 2-10
Chapter 3 To Set the Horizontal System ........................................... 3-1
To Adjust the Horizontal Timebase...........................................................3-2
To Adjust the Horizontal Position..............................................................3-3
Delayed Sweep ......................................................................................3-4
Chapter 4 To Set the Sample System................................................ 4-1
Timebase Mode .....................................................................................4-2
YT Mode.........................................................................................4-2
XY Mode.........................................................................................4-2
ROLL Mode .....................................................................................4-4
Acquisition Mode....................................................................................4-5
Normal ...........................................................................................4-5
Average..........................................................................................4-5
Peak...............................................................................................4-6
High Resolution ...............................................................................4-6
Sampling Mode ......................................................................................4-7
Sample Rate..........................................................................................4-7
LA Sample Rate .....................................................................................4-9
Memory Depth.......................................................................................4-9
LA Memory Depth ................................................................................4-10
Anti-Aliasing ........................................................................................4-10
Horizontal Expansion ............................................................................4-11
Chapter 5 To Trigger the Oscilloscope .............................................. 5-1
Trigger Source .......................................................................................5-2

Contents RIGOL
MSO5000-E User Guide XV
Trigger LEVEL/Threshold Level................................................................ 5-3
Trigger Mode ........................................................................................ 5-4
Trigger Coupling.................................................................................... 5-5
Trigger Holdoff...................................................................................... 5-6
Noise Rejection ..................................................................................... 5-7
Trigger Type ......................................................................................... 5-8
Edge Trigger................................................................................... 5-9
Pulse Trigger .................................................................................5-10
Slope Trigger.................................................................................5-12
Video Trigger.................................................................................5-15
Pattern Trigger ..............................................................................5-17
Duration Trigger ............................................................................5-19
Timeout Trigger .............................................................................5-22
Runt Trigger ..................................................................................5-23
Window Trigger .............................................................................5-25
Delay Trigger.................................................................................5-27
Setup/Hold Trigger.........................................................................5-29
Nth Edge Trigger............................................................................5-31
RS232 Trigger (Option)...................................................................5-32
I2C Trigger (Option).......................................................................5-35
SPI Trigger (Option) .......................................................................5-37
CAN Trigger (Option)......................................................................5-39
FlexRay Trigger (Option).................................................................5-42
LIN Trigger (Option).......................................................................5-44
I2S Trigger (Option) .......................................................................5-46
MIL-STD-1553 Trigger (Option) .......................................................5-49
Zone Trigger ........................................................................................5-52
Trigger Output Connector......................................................................5-53
Chapter 6 Operations and Measurements .........................................6-1
Math Operation ..................................................................................... 6-2
Addition ......................................................................................... 6-2
Subtraction .................................................................................... 6-3
Multiplication.................................................................................. 6-4
Division.......................................................................................... 6-5
FFT ............................................................................................... 6-6
"AND" Operation............................................................................6-10
"OR" Operation..............................................................................6-11
"XOR" Operation ............................................................................6-12
"NOT" Operation............................................................................6-13
Intg..............................................................................................6-14
Diff...............................................................................................6-15
Sqrt..............................................................................................6-16
Lg (Base 10 Exponential)................................................................6-17
Ln ................................................................................................6-18
Exp ..............................................................................................6-19

RIGOL Contents
XVI MSO5000-E User Guide
Abs .............................................................................................. 6-20
Low Pass ......................................................................................6-21
High Pass......................................................................................6-22
Band Pass..................................................................................... 6-23
Band Stop.....................................................................................6-24
AX+B ...........................................................................................6-25
Math Operation Label..................................................................... 6-26
Auto Measurement............................................................................... 6-27
Quick Measurement after AUTO ......................................................6-27
Measurement Parameter ................................................................6-30
Measurement Settings.................................................................... 6-36
Remove the Measurement Result ....................................................6-39
Statistical Function.........................................................................6-39
All Measurement............................................................................6-40
Cursor Measurement ............................................................................6-40
Manual Mode ................................................................................ 6-42
Track Mode ................................................................................... 6-46
XY Mode....................................................................................... 6-48
Measure Mode...............................................................................6-50
Chapter 7 Digital Voltmeter (DVM) and Frequency Counter ............. 7-1
Digital Voltmeter (DVM) ..........................................................................7-2
To Enable or Disable DVM Measurement ............................................7-2
To Select the Measurement Source....................................................7-2
To Select Measurement Mode ...........................................................7-3
To Set the Limits .............................................................................7-3
Frequency Counter.................................................................................7-4
To Enable or Disable the Frequency Counter.......................................7-4
To Select the Measurement Source....................................................7-4
To Select the Measurement Item.......................................................7-4
To Set Resolution.............................................................................7-5
To Clear Count ................................................................................7-5
To Enable or Disable the Statistical Function.......................................7-5
Chapter 8 Power Analysis (Option) .................................................. 8-1
Power Quality ........................................................................................8-2
Ripple ...................................................................................................8-4
Chapter 9 Histogram Analysis .......................................................... 9-1
To Enable or Disable the Histogram Function ............................................9-2
To Select the Histogram Type ..................................................................9-2
To Select the Histogram Source ...............................................................9-3
To Set the Histogram Height ...................................................................9-3
To Set the Histogram Range....................................................................9-3
To Enable or Disable the Statistical Function .............................................9-3
To Reset................................................................................................9-4
Chapter 10 Digital Channel............................................................... 10-1

Contents RIGOL
MSO5000-E User Guide XVII
To Select the Digital Channel .................................................................10-2
To Enable/Disable the Digital Channel.....................................................10-2
To Set the Threshold and Calibrate Probe ...............................................10-3
Auto Arrangement Setting .....................................................................10-4
To Set the Waveform Display Size ..........................................................10-4
To Set the Label ...................................................................................10-4
Group Setting ......................................................................................10-5
Waveform Color of the Digital Channel ...................................................10-6
Chapter 11 Protocol Decoding ..........................................................11-1
Parallel Decoding..................................................................................11-2
RS232 Decoding (Option)......................................................................11-7
I2C Decoding (Option) ........................................................................11-14
SPI Decoding (Option) ........................................................................11-18
LIN Decoding (Option)........................................................................11-23
CAN Decoding (Option)....................................................................... 11-28
FlexRay Decoding (Option)..................................................................11-33
I2S Decoding (Option) ........................................................................11-37
1553B Decoding (Option)....................................................................11-41
Chapter 12 Reference Waveform ......................................................12-1
To Enable Ref Function .........................................................................12-2
To Select the Reference Channel............................................................12-2
To Select the Ref Source .......................................................................12-2
To Adjust the Ref Waveform Display.......................................................12-2
To Save to Internal Memory ..................................................................12-3
To Clear the Display of the Reference Waveform......................................12-3
To View Details of the Reference Waveform ............................................12-3
To Reset the Reference Waveform..........................................................12-4
Color Setting........................................................................................12-4
Label Setting........................................................................................12-4
To Export to Internal or External Memory ...............................................12-5
To Import from Internal or External Memory ...........................................12-5
Chapter 13 Pass/Fail Test .................................................................13-1
To Enable or Disable the Pass/Fail Test Function ......................................13-2
To Start or Stop the Pass/Fail Test Operation...........................................13-2
To Select the Source.............................................................................13-2
To Create a Mask..................................................................................13-3
To Save the Mask .................................................................................13-3
To Load a Mask ....................................................................................13-3
To Set the Output Form of the Test Results .............................................13-4
To Enable or Disable the Display of the Statistics of the Test Results..........13-5
Statistics Reset.....................................................................................13-5
Chapter 14 Waveform Recording & Playing ......................................14-1
Common Settings .................................................................................14-2
Record Options ....................................................................................14-3

RIGOL Contents
XVIII MSO5000-E User Guide
Play Options ........................................................................................14-4
Chapter 15 Search and Navigation Function..................................... 15-1
Search Function ................................................................................... 15-2
Navigation Function..............................................................................15-4
Chapter 16 Display Control............................................................... 16-1
To Select the Display Type ....................................................................16-2
To Set the Persistence Time ..................................................................16-2
To Set the Waveform Intensity ..............................................................16-3
To Set the Screen Grid.......................................................................... 16-3
To Set the Grid Brightness.....................................................................16-3
Scale ..................................................................................................16-4
Color Grade .........................................................................................16-4
Waveform Freeze .................................................................................16-4
Chapter 17 Function/Arbitrary Waveform Generator (Option)......... 17-1
To Output Basic Waveforms ..................................................................17-2
To Output Sine ..............................................................................17-2
To Output Square ..........................................................................17-3
To Output Ramp ............................................................................17-4
To Output Pulse............................................................................. 17-4
To Output DC ................................................................................ 17-5
To Output Noise ............................................................................17-5
Sinc.............................................................................................. 17-6
Exp.Rise .......................................................................................17-6
Exp.Fall.........................................................................................17-7
ECG .............................................................................................17-7
Gauss........................................................................................... 17-8
Lorentz.........................................................................................17-8
Haversine .....................................................................................17-9
To Output the Arbitrary Waveform .........................................................17-9
To Load the Channel and Waveform ................................................ 17-9
To Create the Waveform............................................................... 17-10
To Edit Waveforms....................................................................... 17-12
Modulation ........................................................................................ 17-13
AM ............................................................................................. 17-14
FM ............................................................................................. 17-15
FSK ............................................................................................ 17-16
Sweep............................................................................................... 17-16
Burst ................................................................................................ 17-18
Chapter 18 Store and Load............................................................... 18-1
Storage System.................................................................................... 18-2
Storage Type .......................................................................................18-2
Load Type ...........................................................................................18-4
Internal Storage and Load.....................................................................18-4
External Storage and Load .................................................................... 18-6