RIPsnore Anti Snoring Mandibular Advancement Splint... User manual

Ripsnore™, is the most advanced
Mandibular Advancement Device
on the market, designed and
manufactured by Australians. This
device is designed to minimize the
effects of snoring on the user and is
NOT suitable for use by children.
OUR GUARANTEE
If you follow the simple instructions
and your snoring does not reduce
by 80-100% simply return the device
within 45 days and we will refund your
money. No questions asked, your
money will be refunded regardless!
That is how much faith we have in our
product!
Manufactured by Ripsnore Pty Ltd,
PO Box 16283
City East Brisbane, 4002.
ACN 129 964 950.
Email: [e-mail]
“I want to tell you that I’m “knocked out” by the
performance of my device. I’ve tried all the pills,
sprays and “what have you’s” on the market and
nothing worked. Now I sleep like a baby!!! I’m
delighted and grateful to you as is my wife, my dog
and the neighbours.Thanks again.You and your
product have turned my life around! Gratefully”
ailartsuAnretseWhtreP,eilsmoCleahciM-
”I purchased the RIPSNORE about three weeks
totally against it because he did not believe he
snored that badly. I told him that if he did not at
Anyway, the device worked straight away and we
are both now getting a great night’s sleep (and
Keep up the good work.”
- Amy Woods, Sydney New South Wales
www.ripsnore.com.au
Stop or reduce your
snoring or your
money back.
It’s that simple.
Customer TestimonialsProduct Information
“Ripsnore has solved our problem and it only took
me about 3 nights to get used to it. My husband
is so happy and it works great with my dentures.
Thank you very much.”
enabsirBnotlimaH,daeRteragraM-
PRODUCT RETURNS
If you purchased your device from a
reseller, chemist or pharmacy outlet then
the device MUST be returned to the place
of purchase for a refund. You must
include a copy of the purchase receipt
with the device. If the device was
purchased online directly from Ripsnore
then please return to the Ripsnore post
office box relevant to your country.

Thank you for purchasing the Ripsnore™, the
most advanced Mandibular Advancement
Device on themarket, designed and
manufactured by Australians.
This device is designed to minimize the effects
of snoring on the user and is NOT suitable for
use by children. It is not to be used as a cure
for obstructive sleep apnea and should not be
used by people with tooth or gum problems or
epilepsy.
People with dentures or those who do not have
a full and healthy set of teeth should consult
the dentist before using the device. If you use
topical oral medications, pastes or lotions do
NOT use the device on the same night as it may
react with some applications.
How it works?
The Ripsnore™, when molded and worn correctly
will slightly extend the user’s lower jaw thereby
increasing the clearance between the back of
thethroat and tongue. This increased clearance
will help keep the upper airway open which will
reduce thefrequency and volume of snoring.
How is Ripsnore TM used?
should last between 6-18 months. The device
going to sleep. It is removed in the morning and
then cleaned if necessary. To clean the device
just wash with water and place back into the
protective container to air-dry.
The frequency of device replacementdepends
upon both the force of thelower jawpushing
back on the device, thus changing the molded
shape and whether or not the user grinds or
clenches their teeth.
Fitting Instructions
Preparation:
1. A watch with a second hand for timing
2. A kettle, jug or pot to boil water
3. Pair of kitchen tongs or tweezers (something to hold
the Ripsnore by the plastic tab)
4. A bowl with iced or cold water
Practice putting the device and the spacer in
to your mouth.Make sure all teeth are in the
grooves of the device and that the device is the
correct way up with the bow at the top of the
guard for the top teeth.Move your bottom jaw
about halfway forward – this is typicallywhere
both your top and bottom teeth are totally
aligned.If you extend your jaw too far forward
you will be increasing the chance of possible
then the device can be re-molded to extend the
jaw further.
If necessary, continue increasing the extension
in small steps until either the snoringstops or
you experience jawpain.If you experience jaw
pain and the snoring has notstopped then this
type of device will not work for you. There will
always be a small amount of discomfort but this
will usually disappear after several days. Please
visit the FAQ section on the website for more
information on possible side effects.
Fitting
Fill a container or kettle with enough water to allow the
mouthpiece to be completely submerged.
1. Heat on a stove or in a microwave until the
water boils vigorously. Do not put the Ripsnore™
mouthpiece into the water whilst it is boiling.
Remove the boiling water from the heat source.
2. Holding the Ripsnore by the plastic tab with the
tongs, dip the mouthpiece into the hot water for
exactly 30 seconds in order to soften the plastic.
3. Remove the mouthpiece from the hot water and
gently shake off the excess water.
4. Touch the device against your skin to make sure
it is not too hot. If it is too hot or has been in the
water too long, wait for the device to cool down
before inserting into your mouth.
5. Place the device in your mouth so that the upper
and lower teeth are located in the grooves as
practiced earlier, but DO NOT BITE DOWN.
6.
up, move the lower jaw into the comfortable
forward position as practiced earlier and bite with
moderate force into the device. Remember that
the most forward comfortable position will give the
best results.
7. The mouthpiece will be hot but will not burn you.
Suck the air out of the mouthpiece and with your
tongue and lips press against the mouthpiece to
against your lips and cheeks to improve the
8. Keep biting and applying the pressure with your
9. Remove the mouthpiece and place in ice-cold
water for 60 seconds to set the shape.
10.
11.
exercise again, remembering this time to only dip
the mouthpiece for 18 seconds into the hot water.
12. Remove the plastic spacer to allow for breathing
through the device.
13. If you do not stop snoring completely, re-mold
with your jaw extended a little further forward.
Replace the plastic spacer when remolding to
stop the breathing holes from closing.
Welcome to Ripsnore™
How a Correctly Fitted RIPsnore Looks