Rishang Crystal Series User manual

SMPS
05Turn off the switch, and energize
the power supply, then you can
control the LED strip with the
switch.
Note: Keep the switch, the power supply
and the controller out of reach of children.
Clean the mounting surface
before installing and confirm
the installation position and
quantity .
01
4
Unit:mm[in]
Dimension and Connection Illustration
Model and Specification
3.3
2. Installation Guide:
Installation and Use
1. Product Parts:
LED Strips Line Connector
L-connector T-connector Cross-connector
242
Installation Procedures
1000[39.37]72[2.83]
52[2.05]
L
26[1.02]
1200[47.24]
200[7.87]
Input Voltage(V AC): 100~240
Working Voltage(V DC): 12
Operating Temperature (℃[°F]): 0 40[32~104]
Storage Temperature (℃[°F]): -20～60[-4~140]
～
Quantity(pcs)
Model
Part Number
Color: Monochrome
Series
R6060BA
R6060BA-1
R6060BA
R6060BA-3
R6030AA
R6030AA-2
R6030AA
R6030AA-4
Crystal Series
6.6 13.2 6.6
Fig.1 R6060BA-3: L=300[11.81]
R6030AA-4: L=500[19.69]
Fig.2 : L=300[11.81]
R6030AA-2: L=500[19.69]
R6060BA-1
Connecting Modes between the Strips
The line pins or line holes of
L-connectors can be connected
to those of strips.
The line pins or line holes of
T-connectors can be connected
to those of strips.
The line pins of any strips can be
connected to the line holes of
strips.
02
03
01
The line pins or line holes of
Cross-connectors can be
connected to those of other
strips.
04
The line pins of any strips can be
connected to the line holes of
any strips and other line holes of
other strips.
05
03 Choose the connecting mode
between the LED strips.
02
gradually, and stick strips on the
mounting surface.
Peel off the adhesive tape
R Wated Power( )
04 Plug the interface of the strip
into the Power Supply.
Note: Don’t plug the SMPS
connector reversely!

V1.0
Read this manual carefully before using this product and keep it!
Crystal Series Flex LED Strip
Manual
R6060BA-1 R6060BA-3
R6030AA-2 R6030AA-4
Malfunction & Solution Table
Declaration
If the luminaire is damaged, please contact the manufacturer or his
service agent.
All the data and pictures in this manual are subject to actual
products.
Warranty: 2 years or 9,000 hours, whichever comes first.
Information provided is subject to change without notice.
WARNING
Turn power off before installing the products.
Forbid using any acid and alkali adhesive or glue to fix the
product.
Malfunction & Solution Table
Malfunction Possible Causes Solutions
Power on the supply.
None LED
works connectors are not connected
well, which causes the LED strips
not work.
3.The pins and the holes of the
Replace a .connector
or re-connect the connectors
properly.
Replace the damaged products
Some LED
strips don't
work
are damaged.
1. Some of the pins of the products
1.The power supply doesn't work.
2. The connector is damaged.
connector
2.
.
Something wrong with the
Replace the strips with new
ones.
Replace the connector.
Brightness
of the LEDs
is dim or
not even
Too many products connected
to the power supply
Reduce the quantity to the
standard quantity per string.
LED strips
are blinking
1. .Bad connections exist
2. .The power supply malfunctions
Find the bad points and remove
them.
Replace the power supply with
a new one.
NOTE
Make sure that you keep the surface clean before installing strips.
Don't exceed 4pcs flex LED strips per power supply.
Forbid using any acid and alkali adhesive to fix the strips.
Turn power off before installing products.