Rishang RD0260AC-A User manual

Copyright RISHANG OPTOELECTRONICS CO., LTD All Rights Reserved Rev: 6.0
1/ 7
RiSHANG •High-end LED Signage Lighting
Stock Code: 002654
Prepared Checked Approved
Accepted Confirmed Approved
Specification
CE
RoHS
5050
SMD
300
LEDS
LED
Strip
DC
24V
IP
20
3
Years
UL

Copyright RISHANG OPTOELECTRONICS CO., LTD All Rights Reserved Rev: 6.0
2/ 7
RiSHANG •High-end LED Signage Lighting
Stock Code: 002654
Model: ◎RD0260AC Features:
5000*12, 300pcs 5050 SMD LED, bare board series, 24Vdc,
constant voltage, RGBW colorful LED flex strip
◎New ID design, simple and elegant, highly textured;
◎Integrated 5050 RGBW SMD LED, good light-mixing
effect;
◎ERP system for white color, good color uniformity;
◎Double-sided pure copper PCB, low attenuation;
◎Anti-oxidation by silver;
◎CE, RoHS, UL compliant, guaranteeing reliable quality
Figure:
Applications:
◎Suitable for hotel, shopping mall, home, cabinet, show
frame, etc. as main lighting, indirect lighting, cove lighting,
contour lighting, decorative lighting, etc.
Warranty:
◎3 years or 13,000 hours, whichever comes first.
Optical and Electrical Parameters:
P/N LED
Color
CCT (K)
WL (nm) CRI SD CM
Beam
Angle
(°)
Luminous
Flux
（
Im/m
）
Luminous
Efficacy
（
Im/W
）
Working
voltage
(VDC)
Working
current(mA) Power(w/m)
1m[39
.37in]
5m[19
6.8in]
1m[39
.37in]
5m[19
6.8in]
RD0260AC-A
Red 625-630 -- --
≥115
129 30
24
180 863 4.3 20.0
Green 510-530 -- -- 344 80 180 833 4.3 20.0
Blue 450-470 -- -- 86 20 180 796 4.3 20.0
Pure
white 6500 ≥80 - 387 90 195 846 4.7 21.0
Others:
P/N IP
Grade
Operating Temp Storage Temp Standard
length
Max. cascading
length LED Qty
(pcs)
Weight
(
℃)
(
℉)
(
℃)
(
℉)
m inch m inch (g/piece) (lb/piece)
RD0260AC-A IP20 -25~
+60
-13~
+140
-25~
+70
-13~
+158 5 196.8 5 196.8 60 30 0.066

Copyright RISHANG OPTOELECTRONICS CO., LTD All Rights Reserved Rev: 6.0
3/ 7
RiSHANG •High-end LED Signage Lighting
Stock Code: 002654
Notes：
(1) Testing environment temperature: 25±2℃[77±3.6℉];
(2) The actual data of each single product may differ from above typical data which are subject to change without prior notice;
(3) The above “--” means the parameters are not required temporarily;
(4) The product is controlled by controller, and the white light doesn’t illuminate simultaneously with other three colors; the max power is 8.6W/m.
Profile Drawings:
Light Distribution/Iso-illuminance diagram:
Packaging Information:
P/N Qty
(m/reel)
Qty
(m/carton)
Total
Qty
(m)
Total weight Outer carton size
length width height
(Kg) (lb) (mm) (inch) (mm) (inch) (mm) (inch)
RD0260AC-A 5 60 120 5.4 11.88 398 15.66 256 10.07 238 9.37
Unit: mm [inch]

Copyright RISHANG OPTOELECTRONICS CO., LTD All Rights Reserved Rev: 6.0
4/ 7
RiSHANG •High-end LED Signage Lighting
Stock Code: 002654
Packaging Diagram:
Connection Instruction:
Parts & Tools:
◎
Product Spare Parts
◎
Self-provided Tools
Note: Please connect the ‘+’ and ‘-’ of wires to those of controller output correctly
Scissors
Electrical Drill & Drilling bit
LED Strip
Load the strip into a reel
Put into antistatic bag
Pack into the inner carton
Seal the inner carton
Seal the outer carton Put the inner carton into the
outer carton
PowerAdapter
AC INPUT: 220V
DC OUTPUT: 24V
RGBW Controller
MAX≤5m
+：Black wire -：Respectively R G B W

Copyright RISHANG OPTOELECTRONICS CO., LTD All Rights Reserved Rev: 6.0
5/ 7
RiSHANG •High-end LED Signage Lighting
Stock Code: 002654
Installation Steps & Cautions:
◎Calculate the needed length and
cut off the extra length along
cutting mark if necessary; if
need to add wires, please weld
them at the next location with
printed mark.
◎While sticking strips, peel off the
release paper of the tape step by
step. Don’t peel off all release paper
at a time to avoid getting your strip in
a mess.
△
Notes: No pressing the bead!
◎Stick Mylar tape to isolate the
cutting position from the
bottom of profile inner slot to
avoid short-circuit;
◎The installation at the corner is
shown as the above figure.
△Notes: No bending it into right
angle; No twisting it to stick on the
mounting surface.
◎Connect strip wires to the output
termin
al of power supply, and
dispose with waterproof, insulation,
short-circuit and anti-corrosion
protection at both the wire joints and
the cut section of your strip (if any)
◎
Make sure the mounting
surface is clean before installation;
◎No bending the strip at
the position of LED
◎No twisting the strip ◎
No winding an object
with a diameter <5cm
No bending here
No twisting

Copyright RISHANG OPTOELECTRONICS CO., LTD All Rights Reserved Rev: 6.0
6/ 7
RiSHANG •High-end LED Signage Lighting
Stock Code: 002654
Optional Parts:
Category Part Name Figure Specifications/Description Article
Number
Color IP
Grade
Notes
Terminal
Connector
Strip
Connector
12mm width, RGBW, bare board
strip, cable-board connector
/24.3*17*7.78mm
1CN-07-121 / IP33 /
Strip
Connector
12mm width, RGBW, bare board
strip, board-board connector
/19.55*17*7.78mm
1CN-07-127 / IP33 /
Troubleshooting:
Malfunctions Possible Causes Solutions
All LEDs don’t work
1. The power supply did not connect to power
grid. Power on
2. No electricity due to short-circuit of external
power supply.
Remove the malfunction caused by short-circuit, power on
again.
3. The wires of strips connect to power supply
output reversely.
Check the connecting and ensure the wires are connected
correctly.
Part of LEDs don’t work
1. Part of power supplies do not have output. Check the power supply system.
2. Part of wires of strips have malfunction.
3. Particular modules connected reversely. Correct connection
Brightness of LEDs is
weak or uneven
1. Overloaded power supply; Replace it with higher power supply
2. The power loss of power circuit is huge or the
power loss of each circuit existing big
difference.
Ensure working voltage of strips is within±5%V of rated
voltage.
1. Shorten the length of wires between the first strip and
power supply or replaced with wires with bigger diameter;
2. Ensure the cascading qty of string is less than or equal to
the allowed maximum cascading qty, and each strip
cascading qty is well-balanced.)
3. Exceed in qty of strips in series Lessen the cascading qty for strip and ensure the qty for each
electrical circuit is within the maximum cascading qty.
LEDs are blinking 1. Poor contacted in the joints. Find out and tackle malfunction immediately.
2. Failures in power supply. Replace power supply.

Copyright RISHANG OPTOELECTRONICS CO., LTD All Rights Reserved Rev: 6.0
7/ 7
RiSHANG •High-end LED Signage Lighting
Stock Code: 002654
<End>
Shenzhen Rishang Optoelectronics Co., Ltd (stock code: 002654)
Add: Block 2, Hongfa jiateli High-Tech. Park Tangtou Ave., Shiyan, Bao’an Shenzhen
Tell: [phone] E-mail: [email protected]n
Website: www.ledlamps.com.cn
Declaration:
◎If the external flexible cable of light box is damaged, please replace it by its manufacturer or its service agent or qualified
person to avoid a hazard.
◎The specific installation and cautions please refer to the user manual.
◎The given data in this specification is based on our standard product. There may be existed slight difference compared with
actual products.
◎All Illustrations in this specification are for reference only.
◎This product is subject to change or modify without prior notice.
◎RISHANG OPTOELECTRONICS CO., LTD reserves the right of final explanation for this specification.
Website WeChat Account